From ad24b0da9ecec433091f74596843703e4cf5da77 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 5 Jul 2013 11:53:28 +0200 Subject: [PATCH] wireless: indent kernel-doc with tabs Almost everywhere tabs are used to indent continuation lines, replace the few places that use spaces. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 16 ++++++++-------- include/net/mac80211.h | 24 ++++++++++++------------ 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 79c2277..4940960 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -490,7 +490,7 @@ enum survey_info_flags { * @channel: the channel this survey record reports, mandatory * @filled: bitflag of flags from &enum survey_info_flags * @noise: channel noise in dBm. This and all following fields are - * optional + * optional * @channel_time: amount of time in ms the radio spent on the channel * @channel_time_busy: amount of time the primary channel was sensed busy * @channel_time_ext_busy: amount of time the extension channel was sensed busy @@ -546,9 +546,9 @@ struct cfg80211_crypto_settings { /** * struct cfg80211_beacon_data - beacon data * @head: head portion of beacon (before TIM IE) - * or %NULL if not changed + * or %NULL if not changed * @tail: tail portion of beacon (after TIM IE) - * or %NULL if not changed + * or %NULL if not changed * @head_len: length of @head * @tail_len: length of @tail * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL @@ -764,7 +764,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @STATION_INFO_PLINK_STATE: @plink_state filled * @STATION_INFO_SIGNAL: @signal filled * @STATION_INFO_TX_BITRATE: @txrate fields are filled - * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) + * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled @@ -1509,7 +1509,7 @@ enum cfg80211_assoc_req_flags { * @prev_bssid: previous BSSID, if not %NULL use reassociate frame * @flags: See &enum cfg80211_assoc_req_flags * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask - * will be used in ht_capa. Un-supported values will be ignored. + * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT capability override * @vht_capa_mask: VHT capability mask indicating which fields to use @@ -1593,7 +1593,7 @@ struct cfg80211_disassoc_request { * @basic_rates: bitmap of basic rates to use when creating the IBSS * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask - * will be used in ht_capa. Un-supported values will be ignored. + * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. */ struct cfg80211_ibss_params { @@ -1635,9 +1635,9 @@ struct cfg80211_ibss_params { * @key: WEP key for shared key authentication * @flags: See &enum cfg80211_assoc_req_flags * @bg_scan_period: Background scan period in seconds - * or -1 to indicate that default value is to be used. + * or -1 to indicate that default value is to be used. * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask - * will be used in ht_capa. Un-supported values will be ignored. + * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT Capability overrides * @vht_capa_mask: The bits of vht_capa which are to be used. diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5b7a3da..7c5dc78 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1004,11 +1004,11 @@ enum ieee80211_smps_mode { * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame - * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, - * but actually means the number of transmissions not the number of retries + * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, + * but actually means the number of transmissions not the number of retries * @short_frame_max_tx_count: Maximum number of transmissions for a "short" - * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the - * number of transmissions not the number of retries + * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the + * number of transmissions not the number of retries * * @smps_mode: spatial multiplexing powersave mode; note that * %IEEE80211_SMPS_STATIC is used when the device is not @@ -1092,7 +1092,7 @@ enum ieee80211_vif_flags { * be off when it is %NULL there can still be races and packets could be * processed after it switches back to %NULL. * @debugfs_dir: debugfs dentry, can be used by drivers to create own per - * interface debug files. Note that it will be NULL for the virtual + * interface debug files. Note that it will be NULL for the virtual * monitor interface (if that is requested.) * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). @@ -1425,10 +1425,10 @@ struct ieee80211_tx_control { * the stack. * * @IEEE80211_HW_CONNECTION_MONITOR: - * The hardware performs its own connection monitoring, including - * periodic keep-alives to the AP and probing the AP on beacon loss. - * When this flag is set, signaling beacon-loss will cause an immediate - * change to disassociated state. + * The hardware performs its own connection monitoring, including + * periodic keep-alives to the AP and probing the AP on beacon loss. + * When this flag is set, signaling beacon-loss will cause an immediate + * change to disassociated state. * * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC: * This device needs to get data from beacon before association (i.e. @@ -1526,10 +1526,10 @@ enum ieee80211_hw_flags { * @channel_change_time: time (in microseconds) it takes to change channels. * * @max_signal: Maximum value for signal (rssi) in RX information, used - * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB + * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB * * @max_listen_interval: max listen interval in units of beacon interval - * that HW supports + * that HW supports * * @queues: number of available hardware transmit queues for * data packets. WMM/QoS requires at least four, these @@ -2443,7 +2443,7 @@ enum ieee80211_roc_type { * The callback can sleep. * * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware. - * Currently, this is only used for IBSS mode debugging. Is not a + * Currently, this is only used for IBSS mode debugging. Is not a * required function. * The callback can sleep. * -- 2.7.4