From aad004c1382c186d1c787155f8ce8a5ee98a9974 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 31 Jan 2023 09:46:29 +0100 Subject: [PATCH] ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-alti6p.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e8325fd..e6a4e27 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -22,6 +22,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; i2c2-mux { @@ -191,6 +192,13 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -208,10 +216,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; status = "okay"; mdio { -- 2.7.4