From aa42db44f6705334c6130103492484ea3c7199b3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Jan 2017 23:19:01 +0100 Subject: [PATCH] 8250: of: remove remnants of generic of_serial driver During build testing, I ran into a warning in a driver that I had written myself at some point: drivers/tty/serial/8250/8250_of.c: In function 'of_platform_serial_probe': drivers/tty/serial/8250/8250_of.c:233:1: error: the frame size of 1200 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] This is harmless by itself, but it shows two other problems in the driver: - It still tries to be generic enough to handle all kinds of serial ports, where in reality the driver has been 8250-only for a while, and every other uart has its own DT support - As a result of that generalization, we keep two copies of 'struct uart_port' on the stack during probe(). This is completely unnessary. Removing the last code dealing with unsupported port_type values solves both problems nicely, and reduces the stack size. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_of.c | 93 ++++++++++----------------------------- 1 file changed, 24 insertions(+), 69 deletions(-) diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 52812524..1cbadaf 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -172,7 +172,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev) { const struct of_device_id *match; struct of_serial_info *info; - struct uart_port port; + struct uart_8250_port port8250; + u32 tx_threshold; int port_type; int ret; @@ -188,41 +189,24 @@ static int of_platform_serial_probe(struct platform_device *ofdev) return -ENOMEM; port_type = (unsigned long)match->data; - ret = of_platform_serial_setup(ofdev, port_type, &port, info); + memset(&port8250, 0, sizeof(port8250)); + ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info); if (ret) goto out; - switch (port_type) { - case PORT_8250 ... PORT_MAX_8250: - { - u32 tx_threshold; - struct uart_8250_port port8250; - memset(&port8250, 0, sizeof(port8250)); - port8250.port = port; + if (port8250.port.fifosize) + port8250.capabilities = UART_CAP_FIFO; - if (port.fifosize) - port8250.capabilities = UART_CAP_FIFO; + /* Check for TX FIFO threshold & set tx_loadsz */ + if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold", + &tx_threshold) == 0) && + (tx_threshold < port8250.port.fifosize)) + port8250.tx_loadsz = port8250.port.fifosize - tx_threshold; - /* Check for TX FIFO threshold & set tx_loadsz */ - if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold", - &tx_threshold) == 0) && - (tx_threshold < port.fifosize)) - port8250.tx_loadsz = port.fifosize - tx_threshold; + if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control")) + port8250.capabilities |= UART_CAP_AFE; - if (of_property_read_bool(ofdev->dev.of_node, - "auto-flow-control")) - port8250.capabilities |= UART_CAP_AFE; - - ret = serial8250_register_8250_port(&port8250); - break; - } - default: - /* need to add code for these */ - case PORT_UNKNOWN: - dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); - ret = -ENODEV; - break; - } + ret = serial8250_register_8250_port(&port8250); if (ret < 0) goto out; @@ -232,7 +216,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) return 0; out: kfree(info); - irq_dispose_mapping(port.irq); + irq_dispose_mapping(port8250.port.irq); return ret; } @@ -242,14 +226,8 @@ out: static int of_platform_serial_remove(struct platform_device *ofdev) { struct of_serial_info *info = platform_get_drvdata(ofdev); - switch (info->type) { - case PORT_8250 ... PORT_MAX_8250: - serial8250_unregister_port(info->line); - break; - default: - /* need to add code for these */ - break; - } + + serial8250_unregister_port(info->line); if (info->clk) clk_disable_unprepare(info->clk); @@ -258,18 +236,23 @@ static int of_platform_serial_remove(struct platform_device *ofdev) } #ifdef CONFIG_PM_SLEEP -static void of_serial_suspend_8250(struct of_serial_info *info) +static int of_serial_suspend(struct device *dev) { + struct of_serial_info *info = dev_get_drvdata(dev); struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_port *port = &port8250->port; serial8250_suspend_port(info->line); + if (info->clk && (!uart_console(port) || console_suspend_enabled)) clk_disable_unprepare(info->clk); + + return 0; } -static void of_serial_resume_8250(struct of_serial_info *info) +static int of_serial_resume(struct device *dev) { + struct of_serial_info *info = dev_get_drvdata(dev); struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_port *port = &port8250->port; @@ -277,34 +260,6 @@ static void of_serial_resume_8250(struct of_serial_info *info) clk_prepare_enable(info->clk); serial8250_resume_port(info->line); -} - -static int of_serial_suspend(struct device *dev) -{ - struct of_serial_info *info = dev_get_drvdata(dev); - - switch (info->type) { - case PORT_8250 ... PORT_MAX_8250: - of_serial_suspend_8250(info); - break; - default: - break; - } - - return 0; -} - -static int of_serial_resume(struct device *dev) -{ - struct of_serial_info *info = dev_get_drvdata(dev); - - switch (info->type) { - case PORT_8250 ... PORT_MAX_8250: - of_serial_resume_8250(info); - break; - default: - break; - } return 0; } -- 2.7.4