From a9dd8a61b6b1fdf334d0cc63672b3ffac3827f18 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 31 May 2021 11:51:02 +0900 Subject: [PATCH] ALSA: firewire-tascam: perform sequence replay for media clock recovery This commit takes ALSA firewire-tascam driver to perform sequence replay for media clock recovery. The protocol specific to Tascam FireWire series is not compliant to IEC 61883-1/6 in terms of syt field of CIP. The protocol doesn't use presentation time in received CIP for playback timing. The sequence of the number of data blocks per packet is important for media clock recovery. Although the devices in Tascam FireWire series transfer packets regardless of receiving packets, the tx packets includes no events in the beginning of streaming. It takes so long to multiplex any event into the packet after receiving the sequence of packets. As long as I experienced, it takes several thousands of isochronous cycle. Furthermore, just after changing sampling transmission frequency, it stops multiplexing event at once, then starts multiplexing again. The sequence replay is tested with below models: * FW-1884 * FW-1804 * FW-1082 Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210531025103.17880-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/tascam/tascam-stream.c | 21 +++++++++++++++++++-- sound/firewire/tascam/tascam.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/sound/firewire/tascam/tascam-stream.c b/sound/firewire/tascam/tascam-stream.c index 4811b60..53e094c 100644 --- a/sound/firewire/tascam/tascam-stream.c +++ b/sound/firewire/tascam/tascam-stream.c @@ -11,7 +11,7 @@ #define CLOCK_STATUS_MASK 0xffff0000 #define CLOCK_CONFIG_MASK 0x0000ffff -#define READY_TIMEOUT_MS 500 +#define READY_TIMEOUT_MS 4000 static int get_clock(struct snd_tscm *tscm, u32 *data) { @@ -423,6 +423,8 @@ int snd_tscm_stream_reserve_duplex(struct snd_tscm *tscm, unsigned int rate, fw_iso_resources_free(&tscm->rx_resources); return err; } + + tscm->need_long_tx_init_skip = (rate != curr_rate); } return 0; @@ -454,6 +456,7 @@ int snd_tscm_stream_start_duplex(struct snd_tscm *tscm, unsigned int rate) if (!amdtp_stream_running(&tscm->rx_stream)) { int spd = fw_parent_device(tscm->unit)->max_speed; + unsigned int tx_init_skip_cycles; err = set_stream_formats(tscm, rate); if (err < 0) @@ -473,7 +476,19 @@ int snd_tscm_stream_start_duplex(struct snd_tscm *tscm, unsigned int rate) if (err < 0) goto error; - err = amdtp_domain_start(&tscm->domain, 0, false, false); + if (tscm->need_long_tx_init_skip) + tx_init_skip_cycles = 16000; + else + tx_init_skip_cycles = 0; + + // MEMO: Just after starting packet streaming, it transfers packets without any + // event. Enough after receiving the sequence of packets, it multiplexes events into + // the packet. However, just after changing sampling transfer frequency, it stops + // multiplexing during packet transmission. Enough after, it restarts multiplexing + // again. The device ignores presentation time expressed by the value of syt field + // of CIP header in received packets. The sequence of the number of data blocks per + // packet is important for media clock recovery. + err = amdtp_domain_start(&tscm->domain, tx_init_skip_cycles, true, true); if (err < 0) return err; @@ -499,6 +514,8 @@ void snd_tscm_stream_stop_duplex(struct snd_tscm *tscm) fw_iso_resources_free(&tscm->tx_resources); fw_iso_resources_free(&tscm->rx_resources); + + tscm->need_long_tx_init_skip = false; } } diff --git a/sound/firewire/tascam/tascam.h b/sound/firewire/tascam/tascam.h index 78b7a08..28dad4e 100644 --- a/sound/firewire/tascam/tascam.h +++ b/sound/firewire/tascam/tascam.h @@ -99,6 +99,7 @@ struct snd_tscm { unsigned int push_pos; struct amdtp_domain domain; + bool need_long_tx_init_skip; }; #define TSCM_ADDR_BASE 0xffff00000000ull -- 2.7.4