From a9d56950f763fa3e9d831541e62d223197d2ff60 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 2 Feb 2015 11:49:10 +1100 Subject: [PATCH] md/raid5: need_this_block: start simplifying the last two conditions. Both the last two cases are only relevant if something has failed and something needs to be written (but not over-written), and if it is OK to pre-read blocks at this point. So factor out those tests and explain them. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 21c1e79..bb42551 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2930,16 +2930,34 @@ static int need_this_block(struct stripe_head *sh, struct stripe_head_state *s, */ return 1; + /* Sometimes neither read-modify-write nor reconstruct-write + * cycles can work. In those cases we read every block we + * can. Then the parity-update is certain to have enough to + * work with. + * This can only be a problem when we need to write something, + * and some device has failed. If either of those tests + * fail we need look no further. + */ + if (!s->failed || !s->to_write) + return 0; + + if (test_bit(R5_Insync, &dev->flags) && + !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) + /* Pre-reads at not permitted until after short delay + * to gather multiple requests. However if this + * device is no Insync, the block could only be be computed + * and there is no need to delay that. + */ + return 0; if ( - (sh->raid_conf->level <= 5 && s->failed && fdev[0]->towrite && - (!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) && + (sh->raid_conf->level <= 5 && fdev[0]->towrite && !test_bit(R5_OVERWRITE, &fdev[0]->flags)) || ((sh->raid_conf->level == 6 || sh->sector >= sh->raid_conf->mddev->recovery_cp) - && s->failed && s->to_write && + && (s->to_write - s->non_overwrite < - sh->raid_conf->raid_disks - sh->raid_conf->max_degraded) && - (!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)))) + sh->raid_conf->raid_disks - sh->raid_conf->max_degraded) + )) return 1; return 0; } -- 2.7.4