From a9d26f00b8b1b2a79e42cfa4ca20ec9a1c11c1d2 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 4 May 2010 14:43:15 +0100 Subject: [PATCH] staging:iio:imu ADIS16400 and ADIS16405 driver Signed-off-by: Manuel Stahl Signed-off-by: Barry Song Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/imu/Kconfig | 10 + drivers/staging/iio/imu/Makefile | 4 + drivers/staging/iio/imu/adis16400.h | 238 ++++++++ drivers/staging/iio/imu/adis16400_core.c | 849 ++++++++++++++++++++++++++++ drivers/staging/iio/imu/adis16400_ring.c | 245 ++++++++ drivers/staging/iio/imu/adis16400_trigger.c | 127 +++++ drivers/staging/iio/magnetometer/magnet.h | 31 + 7 files changed, 1504 insertions(+) create mode 100644 drivers/staging/iio/imu/adis16400.h create mode 100644 drivers/staging/iio/imu/adis16400_core.c create mode 100644 drivers/staging/iio/imu/adis16400_ring.c create mode 100644 drivers/staging/iio/imu/adis16400_trigger.c create mode 100644 drivers/staging/iio/magnetometer/magnet.h diff --git a/drivers/staging/iio/imu/Kconfig b/drivers/staging/iio/imu/Kconfig index 3fe4716..411804f 100644 --- a/drivers/staging/iio/imu/Kconfig +++ b/drivers/staging/iio/imu/Kconfig @@ -12,3 +12,13 @@ config ADIS16300 help Say yes here to build support for Analog Devices adis16300 four degrees of freedom inertial sensor. + +config ADIS16400 + tristate "Analog Devices ADIS16400/5 IMU SPI driver" + depends on SPI + select IIO_SW_RING + select IIO_RING_BUFFER + select IIO_TRIGGER + help + Say yes here to build support for Analog Devices adis16400/5 triaxial + inertial sensor with Magnetometer. \ No newline at end of file diff --git a/drivers/staging/iio/imu/Makefile b/drivers/staging/iio/imu/Makefile index 4cd5984..de454dd 100644 --- a/drivers/staging/iio/imu/Makefile +++ b/drivers/staging/iio/imu/Makefile @@ -4,3 +4,7 @@ adis16300-y := adis16300_core.o adis16300-$(CONFIG_IIO_RING_BUFFER) += adis16300_ring.o adis16300_trigger.o obj-$(CONFIG_ADIS16300) += adis16300.o + +adis16400-y := adis16400_core.o +adis16400-$(CONFIG_IIO_RING_BUFFER) += adis16400_ring.o adis16400_trigger.o +obj-$(CONFIG_ADIS16400) += adis16400.o \ No newline at end of file diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h new file mode 100644 index 0000000..a8062f6 --- /dev/null +++ b/drivers/staging/iio/imu/adis16400.h @@ -0,0 +1,238 @@ +/* + * adis16400.h support Analog Devices ADIS16400 + * 3d 18g accelerometers, + * 3d gyroscopes, + * 3d 2.5gauss magnetometers via SPI + * + * Copyright (c) 2009 Manuel Stahl + * Copyright (c) 2007 Jonathan Cameron + * + * Loosely based upon lis3l02dq.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SPI_ADIS16400_H_ +#define SPI_ADIS16400_H_ + +#define ADIS16400_STARTUP_DELAY 220 /* ms */ + +#define ADIS16400_READ_REG(a) a +#define ADIS16400_WRITE_REG(a) ((a) | 0x80) + +#define ADIS16400_FLASH_CNT 0x00 /* Flash memory write count */ +#define ADIS16400_SUPPLY_OUT 0x02 /* Power supply measurement */ +#define ADIS16400_XGYRO_OUT 0x04 /* X-axis gyroscope output */ +#define ADIS16400_YGYRO_OUT 0x06 /* Y-axis gyroscope output */ +#define ADIS16400_ZGYRO_OUT 0x08 /* Z-axis gyroscope output */ +#define ADIS16400_XACCL_OUT 0x0A /* X-axis accelerometer output */ +#define ADIS16400_YACCL_OUT 0x0C /* Y-axis accelerometer output */ +#define ADIS16400_ZACCL_OUT 0x0E /* Z-axis accelerometer output */ +#define ADIS16400_XMAGN_OUT 0x10 /* X-axis magnetometer measurement */ +#define ADIS16400_YMAGN_OUT 0x12 /* Y-axis magnetometer measurement */ +#define ADIS16400_ZMAGN_OUT 0x14 /* Z-axis magnetometer measurement */ +#define ADIS16400_TEMP_OUT 0x16 /* Temperature output */ +#define ADIS16400_AUX_ADC 0x18 /* Auxiliary ADC measurement */ + +/* Calibration parameters */ +#define ADIS16400_XGYRO_OFF 0x1A /* X-axis gyroscope bias offset factor */ +#define ADIS16400_YGYRO_OFF 0x1C /* Y-axis gyroscope bias offset factor */ +#define ADIS16400_ZGYRO_OFF 0x1E /* Z-axis gyroscope bias offset factor */ +#define ADIS16400_XACCL_OFF 0x20 /* X-axis acceleration bias offset factor */ +#define ADIS16400_YACCL_OFF 0x22 /* Y-axis acceleration bias offset factor */ +#define ADIS16400_ZACCL_OFF 0x24 /* Z-axis acceleration bias offset factor */ +#define ADIS16400_XMAGN_HIF 0x26 /* X-axis magnetometer, hard-iron factor */ +#define ADIS16400_YMAGN_HIF 0x28 /* Y-axis magnetometer, hard-iron factor */ +#define ADIS16400_ZMAGN_HIF 0x2A /* Z-axis magnetometer, hard-iron factor */ +#define ADIS16400_XMAGN_SIF 0x2C /* X-axis magnetometer, soft-iron factor */ +#define ADIS16400_YMAGN_SIF 0x2E /* Y-axis magnetometer, soft-iron factor */ +#define ADIS16400_ZMAGN_SIF 0x30 /* Z-axis magnetometer, soft-iron factor */ + +#define ADIS16400_GPIO_CTRL 0x32 /* Auxiliary digital input/output control */ +#define ADIS16400_MSC_CTRL 0x34 /* Miscellaneous control */ +#define ADIS16400_SMPL_PRD 0x36 /* Internal sample period (rate) control */ +#define ADIS16400_SENS_AVG 0x38 /* Dynamic range and digital filter control */ +#define ADIS16400_SLP_CNT 0x3A /* Sleep mode control */ +#define ADIS16400_DIAG_STAT 0x3C /* System status */ + +/* Alarm functions */ +#define ADIS16400_GLOB_CMD 0x3E /* System command */ +#define ADIS16400_ALM_MAG1 0x40 /* Alarm 1 amplitude threshold */ +#define ADIS16400_ALM_MAG2 0x42 /* Alarm 2 amplitude threshold */ +#define ADIS16400_ALM_SMPL1 0x44 /* Alarm 1 sample size */ +#define ADIS16400_ALM_SMPL2 0x46 /* Alarm 2 sample size */ +#define ADIS16400_ALM_CTRL 0x48 /* Alarm control */ +#define ADIS16400_AUX_DAC 0x4A /* Auxiliary DAC data */ + +#define ADIS16400_PRODUCT_ID 0x56 /* Product identifier */ +#define ADIS16400_PRODUCT_ID_DEFAULT 0x4015 /* Datasheet says 0x4105, I get 0x4015 */ + +#define ADIS16400_ERROR_ACTIVE (1<<14) +#define ADIS16400_NEW_DATA (1<<14) + +/* MSC_CTRL */ +#define ADIS16400_MSC_CTRL_MEM_TEST (1<<11) +#define ADIS16400_MSC_CTRL_INT_SELF_TEST (1<<10) +#define ADIS16400_MSC_CTRL_NEG_SELF_TEST (1<<9) +#define ADIS16400_MSC_CTRL_POS_SELF_TEST (1<<8) +#define ADIS16400_MSC_CTRL_GYRO_BIAS (1<<7) +#define ADIS16400_MSC_CTRL_ACCL_ALIGN (1<<6) +#define ADIS16400_MSC_CTRL_DATA_RDY_EN (1<<2) +#define ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1) +#define ADIS16400_MSC_CTRL_DATA_RDY_DIO2 (1<<0) + +/* SMPL_PRD */ +#define ADIS16400_SMPL_PRD_TIME_BASE (1<<7) +#define ADIS16400_SMPL_PRD_DIV_MASK 0x7F + +/* DIAG_STAT */ +#define ADIS16400_DIAG_STAT_ZACCL_FAIL (1<<15) +#define ADIS16400_DIAG_STAT_YACCL_FAIL (1<<14) +#define ADIS16400_DIAG_STAT_XACCL_FAIL (1<<13) +#define ADIS16400_DIAG_STAT_XGYRO_FAIL (1<<12) +#define ADIS16400_DIAG_STAT_YGYRO_FAIL (1<<11) +#define ADIS16400_DIAG_STAT_ZGYRO_FAIL (1<<10) +#define ADIS16400_DIAG_STAT_ALARM2 (1<<9) +#define ADIS16400_DIAG_STAT_ALARM1 (1<<8) +#define ADIS16400_DIAG_STAT_FLASH_CHK (1<<6) +#define ADIS16400_DIAG_STAT_SELF_TEST (1<<5) +#define ADIS16400_DIAG_STAT_OVERFLOW (1<<4) +#define ADIS16400_DIAG_STAT_SPI_FAIL (1<<3) +#define ADIS16400_DIAG_STAT_FLASH_UPT (1<<2) +#define ADIS16400_DIAG_STAT_POWER_HIGH (1<<1) +#define ADIS16400_DIAG_STAT_POWER_LOW (1<<0) + +/* GLOB_CMD */ +#define ADIS16400_GLOB_CMD_SW_RESET (1<<7) +#define ADIS16400_GLOB_CMD_P_AUTO_NULL (1<<4) +#define ADIS16400_GLOB_CMD_FLASH_UPD (1<<3) +#define ADIS16400_GLOB_CMD_DAC_LATCH (1<<2) +#define ADIS16400_GLOB_CMD_FAC_CALIB (1<<1) +#define ADIS16400_GLOB_CMD_AUTO_NULL (1<<0) + +/* SLP_CNT */ +#define ADIS16400_SLP_CNT_POWER_OFF (1<<8) + +#define ADIS16400_MAX_TX 24 +#define ADIS16400_MAX_RX 24 + +#define ADIS16400_SPI_SLOW (u32)(300 * 1000) +#define ADIS16400_SPI_BURST (u32)(1000 * 1000) +#define ADIS16400_SPI_FAST (u32)(2000 * 1000) + +/** + * struct adis16400_state - device instance specific data + * @us: actual spi_device + * @work_trigger_to_ring: bh for triggered event handling + * @work_cont_thresh: CLEAN + * @inter: used to check if new interrupt has been triggered + * @last_timestamp: passing timestamp from th to bh of interrupt handler + * @indio_dev: industrial I/O device structure + * @trig: data ready trigger registered with iio + * @tx: transmit buffer + * @rx: recieve buffer + * @buf_lock: mutex to protect tx and rx + **/ +struct adis16400_state { + struct spi_device *us; + struct work_struct work_trigger_to_ring; + struct iio_work_cont work_cont_thresh; + s64 last_timestamp; + struct iio_dev *indio_dev; + struct iio_trigger *trig; + u8 *tx; + u8 *rx; + struct mutex buf_lock; +}; + +int adis16400_spi_write_reg_8(struct device *dev, + u8 reg_address, + u8 val); + +int adis16400_spi_read_burst(struct device *dev, u8 *rx); + +int adis16400_spi_read_sequence(struct device *dev, + u8 *tx, u8 *rx, int num); + +int adis16400_set_irq(struct device *dev, bool enable); + +int adis16400_reset(struct device *dev); + +int adis16400_stop_device(struct device *dev); + +int adis16400_check_status(struct device *dev); + +#ifdef CONFIG_IIO_RING_BUFFER +/* At the moment triggers are only used for ring buffer + * filling. This may change! + */ + +enum adis16400_scan { + ADIS16400_SCAN_SUPPLY, + ADIS16400_SCAN_GYRO_X, + ADIS16400_SCAN_GYRO_Y, + ADIS16400_SCAN_GYRO_Z, + ADIS16400_SCAN_ACC_X, + ADIS16400_SCAN_ACC_Y, + ADIS16400_SCAN_ACC_Z, + ADIS16400_SCAN_MAGN_X, + ADIS16400_SCAN_MAGN_Y, + ADIS16400_SCAN_MAGN_Z, + ADIS16400_SCAN_TEMP, + ADIS16400_SCAN_ADC_0 +}; + +void adis16400_remove_trigger(struct iio_dev *indio_dev); +int adis16400_probe_trigger(struct iio_dev *indio_dev); + +ssize_t adis16400_read_data_from_ring(struct device *dev, + struct device_attribute *attr, + char *buf); + + +int adis16400_configure_ring(struct iio_dev *indio_dev); +void adis16400_unconfigure_ring(struct iio_dev *indio_dev); + +int adis16400_initialize_ring(struct iio_ring_buffer *ring); +void adis16400_uninitialize_ring(struct iio_ring_buffer *ring); +#else /* CONFIG_IIO_RING_BUFFER */ + +static inline void adis16400_remove_trigger(struct iio_dev *indio_dev) +{ +} + +static inline int adis16400_probe_trigger(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline ssize_t +adis16400_read_data_from_ring(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return 0; +} + +static int adis16400_configure_ring(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void adis16400_unconfigure_ring(struct iio_dev *indio_dev) +{ +} + +static inline int adis16400_initialize_ring(struct iio_ring_buffer *ring) +{ + return 0; +} + +static inline void adis16400_uninitialize_ring(struct iio_ring_buffer *ring) +{ +} + +#endif /* CONFIG_IIO_RING_BUFFER */ +#endif /* SPI_ADIS16400_H_ */ diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c new file mode 100644 index 0000000..27e4a73 --- /dev/null +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -0,0 +1,849 @@ +/* + * adis16400.c support Analog Devices ADIS16400/5 + * 3d 2g Linear Accelerometers, + * 3d Gyroscopes, + * 3d Magnetometers via SPI + * + * Copyright (c) 2009 Manuel Stahl + * Copyright (c) 2007 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "../iio.h" +#include "../sysfs.h" +#include "../accel/accel.h" +#include "../adc/adc.h" +#include "../gyro/gyro.h" +#include "../magnetometer/magnet.h" + +#include "adis16400.h" + +#define DRIVER_NAME "adis16400" + +/* At the moment the spi framework doesn't allow global setting of cs_change. + * It's in the likely to be added comment at the top of spi.h. + * This means that use cannot be made of spi_write etc. + */ + +/** + * adis16400_spi_write_reg_8() - write single byte to a register + * @dev: device associated with child of actual device (iio_dev or iio_trig) + * @reg_address: the address of the register to be written + * @val: the value to write + **/ +int adis16400_spi_write_reg_8(struct device *dev, + u8 reg_address, + u8 val) +{ + int ret; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + + mutex_lock(&st->buf_lock); + st->tx[0] = ADIS16400_WRITE_REG(reg_address); + st->tx[1] = val; + + ret = spi_write(st->us, st->tx, 2); + mutex_unlock(&st->buf_lock); + + return ret; +} + +/** + * adis16400_spi_write_reg_16() - write 2 bytes to a pair of registers + * @dev: device associated with child of actual device (iio_dev or iio_trig) + * @reg_address: the address of the lower of the two registers. Second register + * is assumed to have address one greater. + * @val: value to be written + **/ +static int adis16400_spi_write_reg_16(struct device *dev, + u8 lower_reg_address, + u16 value) +{ + int ret; + struct spi_message msg; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + struct spi_transfer xfers[] = { + { + .tx_buf = st->tx, + .bits_per_word = 8, + .len = 2, + .cs_change = 1, + }, { + .tx_buf = st->tx + 2, + .bits_per_word = 8, + .len = 2, + .cs_change = 1, + }, + }; + + mutex_lock(&st->buf_lock); + st->tx[0] = ADIS16400_WRITE_REG(lower_reg_address); + st->tx[1] = value & 0xFF; + st->tx[2] = ADIS16400_WRITE_REG(lower_reg_address + 1); + st->tx[3] = (value >> 8) & 0xFF; + + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + ret = spi_sync(st->us, &msg); + mutex_unlock(&st->buf_lock); + + return ret; +} + +/** + * adis16400_spi_read_reg_16() - read 2 bytes from a 16-bit register + * @dev: device associated with child of actual device (iio_dev or iio_trig) + * @reg_address: the address of the lower of the two registers. Second register + * is assumed to have address one greater. + * @val: somewhere to pass back the value read + **/ +static int adis16400_spi_read_reg_16(struct device *dev, + u8 lower_reg_address, + u16 *val) +{ + struct spi_message msg; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = st->tx, + .bits_per_word = 8, + .len = 2, + .cs_change = 1, + }, { + .rx_buf = st->rx, + .bits_per_word = 8, + .len = 2, + .cs_change = 1, + }, + }; + + mutex_lock(&st->buf_lock); + st->tx[0] = ADIS16400_READ_REG(lower_reg_address); + st->tx[1] = 0; + st->tx[2] = 0; + st->tx[3] = 0; + + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + ret = spi_sync(st->us, &msg); + if (ret) { + dev_err(&st->us->dev, + "problem when reading 16 bit register 0x%02X", + lower_reg_address); + goto error_ret; + } + *val = (st->rx[0] << 8) | st->rx[1]; + +error_ret: + mutex_unlock(&st->buf_lock); + return ret; +} + +/** + * adis16400_spi_read_burst() - read all data registers + * @dev: device associated with child of actual device (iio_dev or iio_trig) + * @rx: somewhere to pass back the value read (min size is 24 bytes) + **/ +int adis16400_spi_read_burst(struct device *dev, u8 *rx) +{ + struct spi_message msg; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + u32 old_speed_hz = st->us->max_speed_hz; + int ret; + + struct spi_transfer xfers[] = { + { + .tx_buf = st->tx, + .bits_per_word = 8, + .len = 2, + .cs_change = 0, + }, { + .rx_buf = rx, + .bits_per_word = 8, + .len = 24, + .cs_change = 1, + }, + }; + + mutex_lock(&st->buf_lock); + st->tx[0] = ADIS16400_READ_REG(ADIS16400_GLOB_CMD); + st->tx[1] = 0; + + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + + st->us->max_speed_hz = min(ADIS16400_SPI_BURST, old_speed_hz); + spi_setup(st->us); + + ret = spi_sync(st->us, &msg); + if (ret) + dev_err(&st->us->dev, "problem when burst reading"); + + st->us->max_speed_hz = old_speed_hz; + spi_setup(st->us); + mutex_unlock(&st->buf_lock); + return ret; +} + +/** + * adis16400_spi_read_sequence() - read a sequence of 16-bit registers + * @dev: device associated with child of actual device (iio_dev or iio_trig) + * @tx: register addresses in bytes 0,2,4,6... (min size is 2*num bytes) + * @rx: somewhere to pass back the value read (min size is 2*num bytes) + **/ +int adis16400_spi_read_sequence(struct device *dev, + u8 *tx, u8 *rx, int num) +{ + struct spi_message msg; + struct spi_transfer *xfers; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + int ret, i; + + xfers = kzalloc(num + 1, GFP_KERNEL); + if (xfers == NULL) { + dev_err(&st->us->dev, "memory alloc failed"); + ret = -ENOMEM; + goto error_ret; + } + + /* tx: |add1|addr2|addr3|...|addrN |zero| + * rx: |zero|res1 |res2 |...|resN-1|resN| */ + spi_message_init(&msg); + for (i = 0; i < num + 1; i++) { + if (i > 0) + xfers[i].rx_buf = st->rx + 2*(i - 1); + if (i < num) + xfers[i].tx_buf = st->tx + 2*i; + xfers[i].bits_per_word = 8; + xfers[i].len = 2; + xfers[i].cs_change = 1; + spi_message_add_tail(&xfers[i], &msg); + } + + mutex_lock(&st->buf_lock); + + ret = spi_sync(st->us, &msg); + if (ret) + dev_err(&st->us->dev, "problem when reading sequence"); + + mutex_unlock(&st->buf_lock); + kfree(xfers); + +error_ret: + return ret; +} + +static ssize_t adis16400_spi_read_signed(struct device *dev, + struct device_attribute *attr, + char *buf, + unsigned bits) +{ + int ret; + s16 val = 0; + unsigned shift = 16 - bits; + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + ret = adis16400_spi_read_reg_16(dev, this_attr->address, (u16 *)&val); + if (ret) + return ret; + + if (val & ADIS16400_ERROR_ACTIVE) + adis16400_check_status(dev); + val = ((s16)(val << shift) >> shift); + return sprintf(buf, "%d\n", val); +} + +static ssize_t adis16400_read_12bit_unsigned(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u16 val = 0; + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + ret = adis16400_spi_read_reg_16(dev, this_attr->address, &val); + if (ret) + return ret; + + if (val & ADIS16400_ERROR_ACTIVE) + adis16400_check_status(dev); + + return sprintf(buf, "%u\n", val & 0x0FFF); +} + +static ssize_t adis16400_read_14bit_signed(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Take the iio_dev status lock */ + mutex_lock(&indio_dev->mlock); + ret = adis16400_spi_read_signed(dev, attr, buf, 14); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static ssize_t adis16400_read_12bit_signed(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Take the iio_dev status lock */ + mutex_lock(&indio_dev->mlock); + ret = adis16400_spi_read_signed(dev, attr, buf, 12); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + + +static ssize_t adis16400_write_16bit(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret; + long val; + + ret = strict_strtol(buf, 10, &val); + if (ret) + goto error_ret; + ret = adis16400_spi_write_reg_16(dev, this_attr->address, val); + +error_ret: + return ret ? ret : len; +} + +static ssize_t adis16400_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret, len = 0; + u16 t; + int sps; + ret = adis16400_spi_read_reg_16(dev, + ADIS16400_SMPL_PRD, + &t); + if (ret) + return ret; + sps = (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 53 : 1638; + sps /= (t & ADIS16400_SMPL_PRD_DIV_MASK) + 1; + len = sprintf(buf, "%d SPS\n", sps); + return len; +} + +static ssize_t adis16400_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + long val; + int ret; + u8 t; + + ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + + t = (1638 / val); + if (t > 0) + t--; + t &= ADIS16400_SMPL_PRD_DIV_MASK; + if ((t & ADIS16400_SMPL_PRD_DIV_MASK) >= 0x0A) + st->us->max_speed_hz = ADIS16400_SPI_SLOW; + else + st->us->max_speed_hz = ADIS16400_SPI_FAST; + + ret = adis16400_spi_write_reg_8(dev, + ADIS16400_SMPL_PRD, + t); + + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +static ssize_t adis16400_write_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + if (len < 1) + return -1; + switch (buf[0]) { + case '1': + case 'y': + case 'Y': + return adis16400_reset(dev); + } + return -1; +} + + + +int adis16400_set_irq(struct device *dev, bool enable) +{ + int ret; + u16 msc; + ret = adis16400_spi_read_reg_16(dev, ADIS16400_MSC_CTRL, &msc); + if (ret) + goto error_ret; + + msc |= ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH; + if (enable) + msc |= ADIS16400_MSC_CTRL_DATA_RDY_EN; + else + msc &= ~ADIS16400_MSC_CTRL_DATA_RDY_EN; + + ret = adis16400_spi_write_reg_16(dev, ADIS16400_MSC_CTRL, msc); + if (ret) + goto error_ret; + +error_ret: + return ret; +} + +int adis16400_reset(struct device *dev) +{ + int ret; + ret = adis16400_spi_write_reg_8(dev, + ADIS16400_GLOB_CMD, + ADIS16400_GLOB_CMD_SW_RESET); + if (ret) + dev_err(dev, "problem resetting device"); + + return ret; +} + +/* Power down the device */ +int adis16400_stop_device(struct device *dev) +{ + int ret; + u16 val = ADIS16400_SLP_CNT_POWER_OFF; + + ret = adis16400_spi_write_reg_16(dev, ADIS16400_SLP_CNT, val); + if (ret) + dev_err(dev, "problem with turning device off: SLP_CNT"); + + return ret; +} + +int adis16400_self_test(struct device *dev) +{ + int ret; + ret = adis16400_spi_write_reg_16(dev, + ADIS16400_MSC_CTRL, + ADIS16400_MSC_CTRL_MEM_TEST); + if (ret) { + dev_err(dev, "problem starting self test"); + goto err_ret; + } + + adis16400_check_status(dev); + +err_ret: + return ret; +} + +int adis16400_check_status(struct device *dev) +{ + u16 status; + int ret; + + ret = adis16400_spi_read_reg_16(dev, ADIS16400_DIAG_STAT, &status); + + if (ret < 0) { + dev_err(dev, "Reading status failed\n"); + goto error_ret; + } + ret = status; + if (status & ADIS16400_DIAG_STAT_ZACCL_FAIL) + dev_err(dev, "Z-axis accelerometer self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_YACCL_FAIL) + dev_err(dev, "Y-axis accelerometer self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_XACCL_FAIL) + dev_err(dev, "X-axis accelerometer self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_XGYRO_FAIL) + dev_err(dev, "X-axis gyroscope self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_YGYRO_FAIL) + dev_err(dev, "Y-axis gyroscope self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_ZGYRO_FAIL) + dev_err(dev, "Z-axis gyroscope self-test failure\n"); + if (status & ADIS16400_DIAG_STAT_ALARM2) + dev_err(dev, "Alarm 2 active\n"); + if (status & ADIS16400_DIAG_STAT_ALARM1) + dev_err(dev, "Alarm 1 active\n"); + if (status & ADIS16400_DIAG_STAT_FLASH_CHK) + dev_err(dev, "Flash checksum error\n"); + if (status & ADIS16400_DIAG_STAT_SELF_TEST) + dev_err(dev, "Self test error\n"); + if (status & ADIS16400_DIAG_STAT_OVERFLOW) + dev_err(dev, "Sensor overrange\n"); + if (status & ADIS16400_DIAG_STAT_SPI_FAIL) + dev_err(dev, "SPI failure\n"); + if (status & ADIS16400_DIAG_STAT_FLASH_UPT) + dev_err(dev, "Flash update failed\n"); + if (status & ADIS16400_DIAG_STAT_POWER_HIGH) + dev_err(dev, "Power supply above 5.25V\n"); + if (status & ADIS16400_DIAG_STAT_POWER_LOW) + dev_err(dev, "Power supply below 4.75V\n"); + +error_ret: + return ret; +} + +static int adis16400_initial_setup(struct adis16400_state *st) +{ + int ret; + u16 prod_id, smp_prd; + struct device *dev = &st->indio_dev->dev; + + /* use low spi speed for init */ + st->us->max_speed_hz = ADIS16400_SPI_SLOW; + st->us->mode = SPI_MODE_3; + spi_setup(st->us); + + /* Disable IRQ */ + ret = adis16400_set_irq(dev, false); + if (ret) { + dev_err(dev, "disable irq failed"); + goto err_ret; + } + + /* Do self test */ + + /* Read status register to check the result */ + ret = adis16400_check_status(dev); + if (ret) { + adis16400_reset(dev); + dev_err(dev, "device not playing ball -> reset"); + msleep(ADIS16400_STARTUP_DELAY); + ret = adis16400_check_status(dev); + if (ret) { + dev_err(dev, "giving up"); + goto err_ret; + } + } + + ret = adis16400_spi_read_reg_16(dev, ADIS16400_PRODUCT_ID, &prod_id); + if (ret) + goto err_ret; + + if (prod_id != ADIS16400_PRODUCT_ID_DEFAULT) + dev_warn(dev, "unknown product id"); + + printk(KERN_INFO DRIVER_NAME ": prod_id 0x%04x at CS%d (irq %d)\n", + prod_id, st->us->chip_select, st->us->irq); + + /* use high spi speed if possible */ + ret = adis16400_spi_read_reg_16(dev, ADIS16400_SMPL_PRD, &smp_prd); + if (!ret && (smp_prd & ADIS16400_SMPL_PRD_DIV_MASK) < 0x0A) { + st->us->max_speed_hz = ADIS16400_SPI_SLOW; + spi_setup(st->us); + } + + +err_ret: + + return ret; +} + +static IIO_DEV_ATTR_ACCEL_X_OFFSET(S_IWUSR | S_IRUGO, + adis16400_read_12bit_signed, + adis16400_write_16bit, + ADIS16400_XACCL_OFF); + +static IIO_DEV_ATTR_ACCEL_Y_OFFSET(S_IWUSR | S_IRUGO, + adis16400_read_12bit_signed, + adis16400_write_16bit, + ADIS16400_YACCL_OFF); + +static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO, + adis16400_read_12bit_signed, + adis16400_write_16bit, + ADIS16400_ZACCL_OFF); + +static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16400_read_14bit_signed, + ADIS16400_SUPPLY_OUT); +static IIO_CONST_ATTR(in_supply_scale, "0.002418"); + +static IIO_DEV_ATTR_GYRO_X(adis16400_read_14bit_signed, + ADIS16400_XGYRO_OUT); +static IIO_DEV_ATTR_GYRO_Y(adis16400_read_14bit_signed, + ADIS16400_YGYRO_OUT); +static IIO_DEV_ATTR_GYRO_Z(adis16400_read_14bit_signed, + ADIS16400_ZGYRO_OUT); +static IIO_CONST_ATTR(gyro_scale, "0.05 deg/s"); + +static IIO_DEV_ATTR_ACCEL_X(adis16400_read_14bit_signed, + ADIS16400_XACCL_OUT); +static IIO_DEV_ATTR_ACCEL_Y(adis16400_read_14bit_signed, + ADIS16400_YACCL_OUT); +static IIO_DEV_ATTR_ACCEL_Z(adis16400_read_14bit_signed, + ADIS16400_ZACCL_OUT); +static IIO_CONST_ATTR(accel_scale, "0.00333 g"); + +static IIO_DEV_ATTR_MAGN_X(adis16400_read_14bit_signed, + ADIS16400_XMAGN_OUT); +static IIO_DEV_ATTR_MAGN_Y(adis16400_read_14bit_signed, + ADIS16400_YMAGN_OUT); +static IIO_DEV_ATTR_MAGN_Z(adis16400_read_14bit_signed, + ADIS16400_ZMAGN_OUT); +static IIO_CONST_ATTR(magn_scale, "0.0005 Gs"); + + +static IIO_DEV_ATTR_TEMP(adis16400_read_12bit_signed); +static IIO_CONST_ATTR(temp_offset, "198.16 K"); +static IIO_CONST_ATTR(temp_scale, "0.14 K"); + +static IIO_DEV_ATTR_IN_RAW(0, adis16400_read_12bit_unsigned, + ADIS16400_AUX_ADC); +static IIO_CONST_ATTR(in0_scale, "0.000806"); + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + adis16400_read_frequency, + adis16400_write_frequency); + +static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16400_write_reset, 0); + +static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("409 546 819 1638"); + +static IIO_CONST_ATTR(name, "adis16400"); + +static struct attribute *adis16400_event_attributes[] = { + NULL +}; + +static struct attribute_group adis16400_event_attribute_group = { + .attrs = adis16400_event_attributes, +}; + +static struct attribute *adis16400_attributes[] = { + &iio_dev_attr_accel_x_offset.dev_attr.attr, + &iio_dev_attr_accel_y_offset.dev_attr.attr, + &iio_dev_attr_accel_z_offset.dev_attr.attr, + &iio_dev_attr_in_supply_raw.dev_attr.attr, + &iio_const_attr_in_supply_scale.dev_attr.attr, + &iio_dev_attr_gyro_x.dev_attr.attr, + &iio_dev_attr_gyro_y.dev_attr.attr, + &iio_dev_attr_gyro_z.dev_attr.attr, + &iio_const_attr_gyro_scale.dev_attr.attr, + &iio_dev_attr_accel_x_raw.dev_attr.attr, + &iio_dev_attr_accel_y_raw.dev_attr.attr, + &iio_dev_attr_accel_z_raw.dev_attr.attr, + &iio_const_attr_accel_scale.dev_attr.attr, + &iio_dev_attr_magn_x.dev_attr.attr, + &iio_dev_attr_magn_y.dev_attr.attr, + &iio_dev_attr_magn_z.dev_attr.attr, + &iio_const_attr_magn_scale.dev_attr.attr, + &iio_dev_attr_temp.dev_attr.attr, + &iio_const_attr_temp_offset.dev_attr.attr, + &iio_const_attr_temp_scale.dev_attr.attr, + &iio_dev_attr_in0_raw.dev_attr.attr, + &iio_const_attr_in0_scale.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_available_sampling_frequency.dev_attr.attr, + &iio_dev_attr_reset.dev_attr.attr, + &iio_const_attr_name.dev_attr.attr, + NULL +}; + +static const struct attribute_group adis16400_attribute_group = { + .attrs = adis16400_attributes, +}; + +static int __devinit adis16400_probe(struct spi_device *spi) +{ + int ret, regdone = 0; + struct adis16400_state *st = kzalloc(sizeof *st, GFP_KERNEL); + if (!st) { + ret = -ENOMEM; + goto error_ret; + } + /* this is only used for removal purposes */ + spi_set_drvdata(spi, st); + + /* Allocate the comms buffers */ + st->rx = kzalloc(sizeof(*st->rx)*ADIS16400_MAX_RX, GFP_KERNEL); + if (st->rx == NULL) { + ret = -ENOMEM; + goto error_free_st; + } + st->tx = kzalloc(sizeof(*st->tx)*ADIS16400_MAX_TX, GFP_KERNEL); + if (st->tx == NULL) { + ret = -ENOMEM; + goto error_free_rx; + } + st->us = spi; + mutex_init(&st->buf_lock); + /* setup the industrialio driver allocated elements */ + st->indio_dev = iio_allocate_device(); + if (st->indio_dev == NULL) { + ret = -ENOMEM; + goto error_free_tx; + } + + st->indio_dev->dev.parent = &spi->dev; + st->indio_dev->num_interrupt_lines = 1; + st->indio_dev->event_attrs = &adis16400_event_attribute_group; + st->indio_dev->attrs = &adis16400_attribute_group; + st->indio_dev->dev_data = (void *)(st); + st->indio_dev->driver_module = THIS_MODULE; + st->indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis16400_configure_ring(st->indio_dev); + if (ret) + goto error_free_dev; + + ret = iio_device_register(st->indio_dev); + if (ret) + goto error_unreg_ring_funcs; + regdone = 1; + + ret = adis16400_initialize_ring(st->indio_dev->ring); + if (ret) { + printk(KERN_ERR "failed to initialize the ring\n"); + goto error_unreg_ring_funcs; + } + + if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) { +#if 0 /* fixme: here we should support */ + iio_init_work_cont(&st->work_cont_thresh, + NULL, + adis16400_thresh_handler_bh_no_check, + 0, + 0, + st); +#endif + ret = iio_register_interrupt_line(spi->irq, + st->indio_dev, + 0, + IRQF_TRIGGER_RISING, + "adis16400"); + if (ret) + goto error_uninitialize_ring; + + ret = adis16400_probe_trigger(st->indio_dev); + if (ret) + goto error_unregister_line; + } + + /* Get the device into a sane initial state */ + ret = adis16400_initial_setup(st); + if (ret) + goto error_remove_trigger; + return 0; + +error_remove_trigger: + if (st->indio_dev->modes & INDIO_RING_TRIGGERED) + adis16400_remove_trigger(st->indio_dev); +error_unregister_line: + if (st->indio_dev->modes & INDIO_RING_TRIGGERED) + iio_unregister_interrupt_line(st->indio_dev, 0); +error_uninitialize_ring: + adis16400_uninitialize_ring(st->indio_dev->ring); +error_unreg_ring_funcs: + adis16400_unconfigure_ring(st->indio_dev); +error_free_dev: + if (regdone) + iio_device_unregister(st->indio_dev); + else + iio_free_device(st->indio_dev); +error_free_tx: + kfree(st->tx); +error_free_rx: + kfree(st->rx); +error_free_st: + kfree(st); +error_ret: + return ret; +} + +/* fixme, confirm ordering in this function */ +static int adis16400_remove(struct spi_device *spi) +{ + int ret; + struct adis16400_state *st = spi_get_drvdata(spi); + struct iio_dev *indio_dev = st->indio_dev; + + ret = adis16400_stop_device(&(indio_dev->dev)); + if (ret) + goto err_ret; + + flush_scheduled_work(); + + adis16400_remove_trigger(indio_dev); + if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) + iio_unregister_interrupt_line(indio_dev, 0); + + adis16400_uninitialize_ring(indio_dev->ring); + adis16400_unconfigure_ring(indio_dev); + iio_device_unregister(indio_dev); + kfree(st->tx); + kfree(st->rx); + kfree(st); + + return 0; + +err_ret: + return ret; +} + +static struct spi_driver adis16400_driver = { + .driver = { + .name = "adis16400", + .owner = THIS_MODULE, + }, + .probe = adis16400_probe, + .remove = __devexit_p(adis16400_remove), +}; + +static __init int adis16400_init(void) +{ + return spi_register_driver(&adis16400_driver); +} +module_init(adis16400_init); + +static __exit void adis16400_exit(void) +{ + spi_unregister_driver(&adis16400_driver); +} +module_exit(adis16400_exit); + +MODULE_AUTHOR("Manuel Stahl "); +MODULE_DESCRIPTION("Analog Devices ADIS16400/5 IMU SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c new file mode 100644 index 0000000..5529b32 --- /dev/null +++ b/drivers/staging/iio/imu/adis16400_ring.c @@ -0,0 +1,245 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../iio.h" +#include "../sysfs.h" +#include "../ring_sw.h" +#include "../accel/accel.h" +#include "../trigger.h" +#include "adis16400.h" + +/** + * combine_8_to_16() utility function to munge to u8s into u16 + **/ +static inline u16 combine_8_to_16(u8 lower, u8 upper) +{ + u16 _lower = lower; + u16 _upper = upper; + return _lower | (_upper << 8); +} + +static IIO_SCAN_EL_C(supply, ADIS16400_SCAN_SUPPLY, IIO_SIGNED(14), + ADIS16400_SUPPLY_OUT, NULL); + +static IIO_SCAN_EL_C(gyro_x, ADIS16400_SCAN_GYRO_X, IIO_SIGNED(14), + ADIS16400_XGYRO_OUT, NULL); +static IIO_SCAN_EL_C(gyro_y, ADIS16400_SCAN_GYRO_Y, IIO_SIGNED(14), + ADIS16400_YGYRO_OUT, NULL); +static IIO_SCAN_EL_C(gyro_z, ADIS16400_SCAN_GYRO_Z, IIO_SIGNED(14), + ADIS16400_ZGYRO_OUT, NULL); + +static IIO_SCAN_EL_C(accel_x, ADIS16400_SCAN_ACC_X, IIO_SIGNED(14), + ADIS16400_XACCL_OUT, NULL); +static IIO_SCAN_EL_C(accel_y, ADIS16400_SCAN_ACC_Y, IIO_SIGNED(14), + ADIS16400_YACCL_OUT, NULL); +static IIO_SCAN_EL_C(accel_z, ADIS16400_SCAN_ACC_Z, IIO_SIGNED(14), + ADIS16400_ZACCL_OUT, NULL); + +static IIO_SCAN_EL_C(magn_x, ADIS16400_SCAN_MAGN_X, IIO_SIGNED(14), + ADIS16400_XMAGN_OUT, NULL); +static IIO_SCAN_EL_C(magn_y, ADIS16400_SCAN_MAGN_Y, IIO_SIGNED(14), + ADIS16400_YMAGN_OUT, NULL); +static IIO_SCAN_EL_C(magn_z, ADIS16400_SCAN_MAGN_Z, IIO_SIGNED(14), + ADIS16400_ZMAGN_OUT, NULL); + +static IIO_SCAN_EL_C(temp, ADIS16400_SCAN_TEMP, IIO_SIGNED(12), + ADIS16400_TEMP_OUT, NULL); +static IIO_SCAN_EL_C(adc_0, ADIS16400_SCAN_ADC_0, IIO_SIGNED(12), + ADIS16400_AUX_ADC, NULL); + +static IIO_SCAN_EL_TIMESTAMP(12); + +static struct attribute *adis16400_scan_el_attrs[] = { + &iio_scan_el_supply.dev_attr.attr, + &iio_scan_el_gyro_x.dev_attr.attr, + &iio_scan_el_gyro_y.dev_attr.attr, + &iio_scan_el_gyro_z.dev_attr.attr, + &iio_scan_el_accel_x.dev_attr.attr, + &iio_scan_el_accel_y.dev_attr.attr, + &iio_scan_el_accel_z.dev_attr.attr, + &iio_scan_el_magn_x.dev_attr.attr, + &iio_scan_el_magn_y.dev_attr.attr, + &iio_scan_el_magn_z.dev_attr.attr, + &iio_scan_el_temp.dev_attr.attr, + &iio_scan_el_adc_0.dev_attr.attr, + &iio_scan_el_timestamp.dev_attr.attr, + NULL, +}; + +static struct attribute_group adis16400_scan_el_group = { + .attrs = adis16400_scan_el_attrs, + .name = "scan_elements", +}; + +/** + * adis16400_poll_func_th() top half interrupt handler called by trigger + * @private_data: iio_dev + **/ +static void adis16400_poll_func_th(struct iio_dev *indio_dev) +{ + struct adis16400_state *st = iio_dev_get_devdata(indio_dev); + st->last_timestamp = indio_dev->trig->timestamp; + schedule_work(&st->work_trigger_to_ring); + /* Indicate that this interrupt is being handled */ + + /* Technically this is trigger related, but without this + * handler running there is currently no way for the interrupt + * to clear. + */ +} + +/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device + * specific to be rolled into the core. + */ +static void adis16400_trigger_bh_to_ring(struct work_struct *work_s) +{ + struct adis16400_state *st + = container_of(work_s, struct adis16400_state, + work_trigger_to_ring); + + int i = 0; + s16 *data; + size_t datasize = st->indio_dev + ->ring->access.get_bpd(st->indio_dev->ring); + + data = kmalloc(datasize , GFP_KERNEL); + if (data == NULL) { + dev_err(&st->us->dev, "memory alloc failed in ring bh"); + return; + } + + if (st->indio_dev->scan_count) + if (adis16400_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0) + for (; i < st->indio_dev->scan_count; i++) { + data[i] = combine_8_to_16(st->rx[i*2+1], + st->rx[i*2]); + } + + /* Guaranteed to be aligned with 8 byte boundary */ + if (st->indio_dev->scan_timestamp) + *((s64 *)(data + ((i + 3)/4)*4)) = st->last_timestamp; + + st->indio_dev->ring->access.store_to(st->indio_dev->ring, + (u8 *)data, + st->last_timestamp); + + iio_trigger_notify_done(st->indio_dev->trig); + kfree(data); + + return; +} +/* in these circumstances is it better to go with unaligned packing and + * deal with the cost?*/ +static int adis16400_data_rdy_ring_preenable(struct iio_dev *indio_dev) +{ + size_t size; + dev_dbg(&indio_dev->dev, "%s\n", __func__); + /* Check if there are any scan elements enabled, if not fail*/ + if (!(indio_dev->scan_count || indio_dev->scan_timestamp)) + return -EINVAL; + + if (indio_dev->ring->access.set_bpd) { + if (indio_dev->scan_timestamp) + if (indio_dev->scan_count) /* Timestamp and data */ + size = 6*sizeof(s64); + else /* Timestamp only */ + size = sizeof(s64); + else /* Data only */ + size = indio_dev->scan_count*sizeof(s16); + indio_dev->ring->access.set_bpd(indio_dev->ring, size); + } + + return 0; +} + +static int adis16400_data_rdy_ring_postenable(struct iio_dev *indio_dev) +{ + return indio_dev->trig + ? iio_trigger_attach_poll_func(indio_dev->trig, + indio_dev->pollfunc) + : 0; +} + +static int adis16400_data_rdy_ring_predisable(struct iio_dev *indio_dev) +{ + return indio_dev->trig + ? iio_trigger_dettach_poll_func(indio_dev->trig, + indio_dev->pollfunc) + : 0; +} + +void adis16400_unconfigure_ring(struct iio_dev *indio_dev) +{ + kfree(indio_dev->pollfunc); + iio_sw_rb_free(indio_dev->ring); +} + +int adis16400_configure_ring(struct iio_dev *indio_dev) +{ + int ret = 0; + struct adis16400_state *st = indio_dev->dev_data; + struct iio_ring_buffer *ring; + INIT_WORK(&st->work_trigger_to_ring, adis16400_trigger_bh_to_ring); + /* Set default scan mode */ + + iio_scan_mask_set(indio_dev, iio_scan_el_supply.number); + iio_scan_mask_set(indio_dev, iio_scan_el_gyro_x.number); + iio_scan_mask_set(indio_dev, iio_scan_el_gyro_y.number); + iio_scan_mask_set(indio_dev, iio_scan_el_gyro_z.number); + iio_scan_mask_set(indio_dev, iio_scan_el_accel_x.number); + iio_scan_mask_set(indio_dev, iio_scan_el_accel_y.number); + iio_scan_mask_set(indio_dev, iio_scan_el_accel_z.number); + iio_scan_mask_set(indio_dev, iio_scan_el_magn_x.number); + iio_scan_mask_set(indio_dev, iio_scan_el_magn_y.number); + iio_scan_mask_set(indio_dev, iio_scan_el_magn_z.number); + iio_scan_mask_set(indio_dev, iio_scan_el_temp.number); + iio_scan_mask_set(indio_dev, iio_scan_el_adc_0.number); + indio_dev->scan_timestamp = true; + + indio_dev->scan_el_attrs = &adis16400_scan_el_group; + + ring = iio_sw_rb_allocate(indio_dev); + if (!ring) { + ret = -ENOMEM; + return ret; + } + indio_dev->ring = ring; + /* Effectively select the ring buffer implementation */ + iio_ring_sw_register_funcs(&ring->access); + ring->preenable = &adis16400_data_rdy_ring_preenable; + ring->postenable = &adis16400_data_rdy_ring_postenable; + ring->predisable = &adis16400_data_rdy_ring_predisable; + ring->owner = THIS_MODULE; + + indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL); + if (indio_dev->pollfunc == NULL) { + ret = -ENOMEM; + goto error_iio_sw_rb_free;; + } + indio_dev->pollfunc->poll_func_main = &adis16400_poll_func_th; + indio_dev->pollfunc->private_data = indio_dev; + indio_dev->modes |= INDIO_RING_TRIGGERED; + return 0; + +error_iio_sw_rb_free: + iio_sw_rb_free(indio_dev->ring); + return ret; +} + +int adis16400_initialize_ring(struct iio_ring_buffer *ring) +{ + return iio_ring_buffer_register(ring, 0); +} + +void adis16400_uninitialize_ring(struct iio_ring_buffer *ring) +{ + iio_ring_buffer_unregister(ring); +} diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c new file mode 100644 index 0000000..3b3250a --- /dev/null +++ b/drivers/staging/iio/imu/adis16400_trigger.c @@ -0,0 +1,127 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../iio.h" +#include "../sysfs.h" +#include "../trigger.h" +#include "adis16400.h" + +/** + * adis16400_data_rdy_trig_poll() the event handler for the data rdy trig + **/ +static int adis16400_data_rdy_trig_poll(struct iio_dev *dev_info, + int index, + s64 timestamp, + int no_test) +{ + struct adis16400_state *st = iio_dev_get_devdata(dev_info); + struct iio_trigger *trig = st->trig; + + trig->timestamp = timestamp; + iio_trigger_poll(trig); + + return IRQ_HANDLED; +} + +IIO_EVENT_SH(data_rdy_trig, &adis16400_data_rdy_trig_poll); + +static DEVICE_ATTR(name, S_IRUGO, iio_trigger_read_name, NULL); + +static struct attribute *adis16400_trigger_attrs[] = { + &dev_attr_name.attr, + NULL, +}; + +static const struct attribute_group adis16400_trigger_attr_group = { + .attrs = adis16400_trigger_attrs, +}; + +/** + * adis16400_data_rdy_trigger_set_state() set datardy interrupt state + **/ +static int adis16400_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct adis16400_state *st = trig->private_data; + struct iio_dev *indio_dev = st->indio_dev; + int ret = 0; + + dev_dbg(&indio_dev->dev, "%s (%d)\n", __func__, state); + ret = adis16400_set_irq(&st->indio_dev->dev, state); + if (state == false) { + iio_remove_event_from_list(&iio_event_data_rdy_trig, + &indio_dev->interrupts[0] + ->ev_list); + /* possible quirk with handler currently worked around + by ensuring the work queue is empty */ + flush_scheduled_work(); + } else { + iio_add_event_to_list(&iio_event_data_rdy_trig, + &indio_dev->interrupts[0]->ev_list); + } + return ret; +} + +/** + * adis16400_trig_try_reen() try renabling irq for data rdy trigger + * @trig: the datardy trigger + **/ +static int adis16400_trig_try_reen(struct iio_trigger *trig) +{ + struct adis16400_state *st = trig->private_data; + enable_irq(st->us->irq); + /* irq reenabled so success! */ + return 0; +} + +int adis16400_probe_trigger(struct iio_dev *indio_dev) +{ + int ret; + struct adis16400_state *st = indio_dev->dev_data; + + st->trig = iio_allocate_trigger(); + st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL); + if (!st->trig->name) { + ret = -ENOMEM; + goto error_free_trig; + } + snprintf((char *)st->trig->name, + IIO_TRIGGER_NAME_LENGTH, + "adis16400-dev%d", indio_dev->id); + st->trig->dev.parent = &st->us->dev; + st->trig->owner = THIS_MODULE; + st->trig->private_data = st; + st->trig->set_trigger_state = &adis16400_data_rdy_trigger_set_state; + st->trig->try_reenable = &adis16400_trig_try_reen; + st->trig->control_attrs = &adis16400_trigger_attr_group; + ret = iio_trigger_register(st->trig); + + /* select default trigger */ + indio_dev->trig = st->trig; + if (ret) + goto error_free_trig_name; + + return 0; + +error_free_trig_name: + kfree(st->trig->name); +error_free_trig: + iio_free_trigger(st->trig); + + return ret; +} + +void adis16400_remove_trigger(struct iio_dev *indio_dev) +{ + struct adis16400_state *state = indio_dev->dev_data; + + iio_trigger_unregister(state->trig); + kfree(state->trig->name); + iio_free_trigger(state->trig); +} diff --git a/drivers/staging/iio/magnetometer/magnet.h b/drivers/staging/iio/magnetometer/magnet.h new file mode 100644 index 0000000..6f6c6ed --- /dev/null +++ b/drivers/staging/iio/magnetometer/magnet.h @@ -0,0 +1,31 @@ + +#include "../sysfs.h" + +/* Magnetometer types of attribute */ + +#define IIO_DEV_ATTR_MAGN_X_OFFSET(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_x_offset, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_Y_OFFSET(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_y_offset, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_Z_OFFSET(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_z_offset, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_X_GAIN(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_x_gain, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_Y_GAIN(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_y_gain, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_Z_GAIN(_mode, _show, _store, _addr) \ + IIO_DEVICE_ATTR(magn_z_gain, _mode, _show, _store, _addr) + +#define IIO_DEV_ATTR_MAGN_X(_show, _addr) \ + IIO_DEVICE_ATTR(magn_x, S_IRUGO, _show, NULL, _addr) + +#define IIO_DEV_ATTR_MAGN_Y(_show, _addr) \ + IIO_DEVICE_ATTR(magn_y, S_IRUGO, _show, NULL, _addr) + +#define IIO_DEV_ATTR_MAGN_Z(_show, _addr) \ + IIO_DEVICE_ATTR(magn_z, S_IRUGO, _show, NULL, _addr) -- 2.7.4