From a8a398b833f33a1efb8352fcd9f03a354fb387d9 Mon Sep 17 00:00:00 2001 From: Dilip Kota Date: Wed, 3 Oct 2018 19:14:23 +0530 Subject: [PATCH] dt-bindings: soc: qcom: Remove SPI controller maximum frequency binding SPI controller driver should maintain the maximum frequency of the controller instead of relying on device tree bindings. Because maximum frequency is specific property of SPI controller. Signed-off-by: Dilip Kota Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Rob Herring Signed-off-by: Alok Chauhan Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index ff92e5a..b9d0c21 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -60,7 +60,6 @@ Required properties: - interrupts: Must contain SPI controller interrupts. - clock-names: Must contain "se". - clocks: Serial engine core clock needed by the device. -- spi-max-frequency: Specifies maximum SPI clock frequency, units - Hz. - #address-cells: Must be <1> to define a chip select address on the SPI bus. - #size-cells: Must be <0>. @@ -112,7 +111,6 @@ Example: pinctrl-names = "default", "sleep"; pinctrl-0 = <&qup_1_spi_2_active>; pinctrl-1 = <&qup_1_spi_2_sleep>; - spi-max-frequency = <19200000>; #address-cells = <1>; #size-cells = <0>; }; -- 2.7.4