From a7aae769ca626819a7f9f078ebdc69a8a1b00c81 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Sat, 18 Dec 2021 17:57:47 +0800 Subject: [PATCH] usb: mtu3: add memory barrier before set GPD's HWO There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: stable@vger.kernel.org Reported-by: Eddie Hung Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mtu3/mtu3_qmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index 3f414f9..2ea3157 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -273,6 +273,8 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) gpd->dw3_info |= cpu_to_le32(GPD_EXT_FLAG_ZLP); } + /* prevent reorder, make sure GPD's HWO is set last */ + mb(); gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO); mreq->gpd = gpd; @@ -306,6 +308,8 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma)); ext_addr |= GPD_EXT_NGP(mtu, upper_32_bits(enq_dma)); gpd->dw3_info = cpu_to_le32(ext_addr); + /* prevent reorder, make sure GPD's HWO is set last */ + mb(); gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO); mreq->gpd = gpd; @@ -445,7 +449,8 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) return; } mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_TXPKTRDY); - + /* prevent reorder, make sure GPD's HWO is set last */ + mb(); /* by pass the current GDP */ gpd_current->dw0_info |= cpu_to_le32(GPD_FLAGS_BPS | GPD_FLAGS_HWO); -- 2.7.4