From a782b5f986c3fa1cfa7f2b57941200c6a5809242 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 4 Jan 2017 14:32:30 -0500 Subject: [PATCH] PCI: designware: Check for iATU unroll only on platforms that use ATU Previously we checked for iATU unroll support by reading PCIE_ATU_VIEWPORT even on platforms, e.g., Keystone, that do not have ATU ports. This can cause bad behavior such as asynchronous external aborts: OF: PCI: MEM 0x60000000..0x6fffffff -> 0x60000000 Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 pgd = c0003000 [00000000] *pgd=80000800004003, *pmd=00000000 Internal error: : 1211 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-00009-g6ff59d2-dirty #7 Hardware name: Keystone task: eb878000 task.stack: eb866000 PC is at dw_pcie_setup_rc+0x24/0x380 LR is at ks_pcie_host_init+0x10/0x170 Move the dw_pcie_iatu_unroll_enabled() check so we only call it on platforms that do not use the ATU. These platforms supply their own ->rd_other_conf() and ->wr_other_conf() methods. [bhelgaas: changelog] Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Fixes: 416379f9ebde ("PCI: designware: Check for iATU unroll support after initializing host") Tested-by: Kishon Vijay Abraham I Signed-off-by: Murali Karicheri Signed-off-by: Bjorn Helgaas Acked-By: Joao Pinto CC: stable@vger.kernel.org # v4.9+ --- drivers/pci/host/pcie-designware.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index bed1999..af8f6e9 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -807,11 +807,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; - /* get iATU unroll support */ - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - dev_dbg(pp->dev, "iATU unroll: %s\n", - pp->iatu_unroll_enabled ? "enabled" : "disabled"); - /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; @@ -882,6 +877,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) * we should not program the ATU here. */ if (!pp->ops->rd_other_conf) { + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, pp->mem_base, pp->mem_bus_addr, pp->mem_size); -- 2.7.4