From a71786d7f519a97fa79cd9e020015b2dee788889 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Thu, 15 Jul 2021 17:07:46 +0800 Subject: [PATCH] dt-bindings: usb: mtu3: remove support VBUS detection of extcon Due to no platforms use a multi-funtion pin to detect VBUS status until now when support dual role mode, prefer not to support it anymore; Another reason is that the controller doesn't support idle status, the dual role port works as device or as host, using an IDDIG pin is good enough, this will help to save another multi-function pin; And fix a typo of 'neede'; Last modify example using VBUS to turn on/off device, for device only mode, the driver doesn't get extcon. Acked-by: Rob Herring Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1626340078-29111-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/mediatek,mtu3.yaml | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index dbc7876..2cac7a8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -106,7 +106,7 @@ properties: extcon: deprecated: true description: | - Phandle to the extcon device detecting the IDDIG/VBUS state, neede + Phandle to the extcon device detecting the IDDIG state, needed when supports dual-role mode. It's considered valid for compatibility reasons, not allowed for new bindings, and use "usb-role-switch" property instead. @@ -230,7 +230,7 @@ examples: }; }; - # Enable/disable device by an input gpio for VBUS pin + # Dual role switch by gpio-usb-b-connector - | #include #include @@ -244,13 +244,27 @@ examples: power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; clocks = <&topckgen CLK_TOP_USB30_SEL>; clock-names = "sys_ck"; - dr_mode = "peripheral"; + dr_mode = "otg"; usb-role-switch; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + host0: usb@11270000 { + compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>; + reg-names = "mac"; + interrupts = ; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + }; connector { compatible = "gpio-usb-b-connector", "usb-b-connector"; type = "micro"; - vbus-gpios = <&pio 13 GPIO_ACTIVE_HIGH>; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_p0_vbus>; }; }; -- 2.7.4