From a62300d99f15c4be7edafbbc2ade0246ec853778 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 12 Feb 2018 09:53:13 +0100 Subject: [PATCH] extcon: gpio: Move platform data into state container This moves the platform data settings from the platform data struct and into the state container, saving some unnecessary references and simplifying things a bit. Signed-off-by: Linus Walleij [cw00.choi: Add FIXME comment of extcon_id] Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-gpio.c | 63 +++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 30 deletions(-) diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 5f88f36..b544997 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -29,7 +29,13 @@ #include /** - * struct gpio_extcon_pdata - A simple GPIO-controlled extcon device. + * struct gpio_extcon_data - A simple GPIO-controlled extcon device state container. + * @edev: Extcon device. + * @irq: Interrupt line for the external connector. + * @work: Work fired by the interrupt. + * @debounce_jiffies: Number of jiffies to wait for the GPIO to stabilize, from the debounce + * value. + * @id_gpiod: GPIO descriptor for this external connector. * @extcon_id: The unique id of specific external connector. * @gpio: Corresponding GPIO. * @gpio_active_low: Boolean describing whether gpio active state is 1 or 0 @@ -40,23 +46,18 @@ * @check_on_resume: Boolean describing whether to check the state of gpio * while resuming from sleep. */ -struct gpio_extcon_pdata { - unsigned int extcon_id; - unsigned gpio; - bool gpio_active_low; - unsigned long debounce; - unsigned long irq_flags; - bool check_on_resume; -}; - struct gpio_extcon_data { struct extcon_dev *edev; int irq; struct delayed_work work; unsigned long debounce_jiffies; - struct gpio_desc *id_gpiod; - struct gpio_extcon_pdata *pdata; + unsigned int extcon_id; + unsigned gpio; + bool gpio_active_low; + unsigned long debounce; + unsigned long irq_flags; + bool check_on_resume; }; static void gpio_extcon_work(struct work_struct *work) @@ -67,10 +68,10 @@ static void gpio_extcon_work(struct work_struct *work) work); state = gpiod_get_value_cansleep(data->id_gpiod); - if (data->pdata->gpio_active_low) + if (data->gpio_active_low) state = !state; - extcon_set_state_sync(data->edev, data->pdata->extcon_id, state); + extcon_set_state_sync(data->edev, data->extcon_id, state); } static irqreturn_t gpio_irq_handler(int irq, void *dev_id) @@ -84,24 +85,23 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id) static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data) { - struct gpio_extcon_pdata *pdata = data->pdata; int ret; - ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN, + ret = devm_gpio_request_one(dev, data->gpio, GPIOF_DIR_IN, dev_name(dev)); if (ret < 0) return ret; - data->id_gpiod = gpio_to_desc(pdata->gpio); + data->id_gpiod = gpio_to_desc(data->gpio); if (!data->id_gpiod) return -EINVAL; - if (pdata->debounce) { + if (data->debounce) { ret = gpiod_set_debounce(data->id_gpiod, - pdata->debounce * 1000); + data->debounce * 1000); if (ret < 0) data->debounce_jiffies = - msecs_to_jiffies(pdata->debounce); + msecs_to_jiffies(data->debounce); } data->irq = gpiod_to_irq(data->id_gpiod); @@ -113,20 +113,23 @@ static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data) static int gpio_extcon_probe(struct platform_device *pdev) { - struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev); struct gpio_extcon_data *data; int ret; - if (!pdata) - return -EBUSY; - if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE) - return -EINVAL; - data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data), GFP_KERNEL); if (!data) return -ENOMEM; - data->pdata = pdata; + + /* + * FIXME: extcon_id represents the unique identifier of external + * connectors such as EXTCON_USB, EXTCON_DISP_HDMI and so on. extcon_id + * is necessary to register the extcon device. But, it's not yet + * developed to get the extcon id from device-tree or others. + * On later, it have to be solved. + */ + if (!data->irq_flags || data->extcon_id > EXTCON_NONE) + return -EINVAL; /* Initialize the gpio */ ret = gpio_extcon_init(&pdev->dev, data); @@ -134,7 +137,7 @@ static int gpio_extcon_probe(struct platform_device *pdev) return ret; /* Allocate the memory of extcon devie and register extcon device */ - data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id); + data->edev = devm_extcon_dev_allocate(&pdev->dev, &data->extcon_id); if (IS_ERR(data->edev)) { dev_err(&pdev->dev, "failed to allocate extcon device\n"); return -ENOMEM; @@ -151,7 +154,7 @@ static int gpio_extcon_probe(struct platform_device *pdev) * is attached or detached. */ ret = devm_request_any_context_irq(&pdev->dev, data->irq, - gpio_irq_handler, pdata->irq_flags, + gpio_irq_handler, data->irq_flags, pdev->name, data); if (ret < 0) return ret; @@ -178,7 +181,7 @@ static int gpio_extcon_resume(struct device *dev) struct gpio_extcon_data *data; data = dev_get_drvdata(dev); - if (data->pdata->check_on_resume) + if (data->check_on_resume) queue_delayed_work(system_power_efficient_wq, &data->work, data->debounce_jiffies); -- 2.7.4