From a5fcc2367e223c45c78a882438c2b8e13fe0f580 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Fri, 16 Jun 2023 17:06:16 +0200 Subject: [PATCH] watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific There are several hardlockup detector implementations and several Kconfig values which allow selection and build of the preferred one. CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb ("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36. It was a preparation step for introducing the new generic perf hardlockup detector. The existing arch-specific variants did not support the to-be-created generic build configurations, sysctl interface, etc. This distinction was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR") in v2.6.38. CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105 ("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used by three architectures, namely blackfin, mn10300, and sparc. The support for blackfin and mn10300 architectures has been completely dropped some time ago. And sparc is the only architecture with the historic NMI watchdog at the moment. And the old sparc implementation is really special. It is always built on sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b ("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added in v4.10-rc1. There are only few locations where the sparc64 NMI watchdog interacts with the generic hardlockup detectors code: + implements arch_touch_nmi_watchdog() which is called from the generic touch_nmi_watchdog() + implements watchdog_hardlockup_enable()/disable() to support /proc/sys/kernel/nmi_watchdog + is always preferred over other generic watchdogs, see CONFIG_HARDLOCKUP_DETECTOR + includes asm/nmi.h into linux/nmi.h because some sparc-specific functions are needed in sparc-specific code which includes only linux/nmi.h. The situation became more complicated after the commit 05a4a95279311c3 ("kernel/watchdog: split up config options") and commit 2104180a53698df5 ("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1. They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc specific hardlockup detector. It was compatible with the perf one regarding the general boot, sysctl, and programming interfaces. HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of HAVE_NMI_WATCHDOG. It made some sense because all arch-specific detectors had some common requirements, namely: + implemented arch_touch_nmi_watchdog() + included asm/nmi.h into linux/nmi.h + defined the default value for /proc/sys/kernel/nmi_watchdog But it actually has made things pretty complicated when the generic buddy hardlockup detector was added. Before the generic perf detector was newer supported together with an arch-specific one. But the buddy detector could work on any SMP system. It means that an architecture could support both the arch-specific and buddy detector. As a result, there are few tricky dependencies. For example, CONFIG_HARDLOCKUP_DETECTOR depends on: ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH The problem is that the very special sparc implementation is defined as: HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear without reading understanding the history. Make the logic less tricky and more self-explanatory by making HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to HAVE_HARDLOCKUP_DETECTOR_SPARC64. Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF, and HARDLOCKUP_DETECTOR_BUDDY may conflict only with HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR and it is not longer enabled when HAVE_NMI_WATCHDOG is set. Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com Signed-off-by: Petr Mladek Reviewed-by: Douglas Anderson Cc: Christophe Leroy Cc: "David S. Miller" Cc: Michael Ellerman Cc: Nicholas Piggin Signed-off-by: Andrew Morton --- arch/Kconfig | 18 ------------------ arch/sparc/Kconfig | 2 +- arch/sparc/Kconfig.debug | 9 +++++++++ include/linux/nmi.h | 5 ++--- kernel/watchdog.c | 2 +- lib/Kconfig.debug | 15 +++++---------- 6 files changed, 18 insertions(+), 33 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index 77e5af5f..6517e54 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF The arch chooses to use the generic perf-NMI-based hardlockup detector. Must define HAVE_PERF_EVENTS_NMI. -config HAVE_NMI_WATCHDOG - depends on HAVE_NMI - bool - help - The arch provides its own hardlockup detector implementation instead - of the generic ones. - - Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH. - It is the last arch-specific implementation which was developed before - adding the common infrastructure for handling hardlockup detectors. - It is always built. It does _not_ use the common command line - parameters and sysctl interface, except for - /proc/sys/kernel/nmi_watchdog. - config HAVE_HARDLOCKUP_DETECTOR_ARCH bool - select HAVE_NMI_WATCHDOG help The arch provides its own hardlockup detector implementation instead of the generic ones. @@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH It uses the same command line parameters, and sysctl interface, as the generic hardlockup detectors. - HAVE_NMI_WATCHDOG is selected to build the code shared with - the sparc64 specific implementation. - config HAVE_PERF_REGS bool help diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 8535e19..7297f69 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -33,7 +33,7 @@ config SPARC select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_PCI_IOMAP select HAS_IOPORT - select HAVE_NMI_WATCHDOG if SPARC64 + select HAVE_HARDLOCKUP_DETECTOR_SPARC64 if SPARC64 select HAVE_CBPF_JIT if SPARC32 select HAVE_EBPF_JIT if SPARC64 select HAVE_DEBUG_BUGVERBOSE diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug index 6b2bec1..4903b68 100644 --- a/arch/sparc/Kconfig.debug +++ b/arch/sparc/Kconfig.debug @@ -14,3 +14,12 @@ config FRAME_POINTER bool depends on MCOUNT default y + +config HAVE_HARDLOCKUP_DETECTOR_SPARC64 + depends on HAVE_NMI + bool + help + Sparc64 hardlockup detector is the last one developed before adding + the common infrastructure for handling hardlockup detectors. It is + always built. It does _not_ use the common command line parameters + and sysctl interface, except for /proc/sys/kernel/nmi_watchdog. diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 07bf2b8..63acc65 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -9,7 +9,7 @@ #include /* Arch specific watchdogs might need to share extra watchdog-related APIs. */ -#if defined(CONFIG_HAVE_NMI_WATCHDOG) +#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64) #include #endif @@ -90,8 +90,7 @@ static inline void hardlockup_detector_disable(void) {} #endif /* Sparc64 has special implemetantion that is always enabled. */ -#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \ - (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH)) +#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64) void arch_touch_nmi_watchdog(void); #else static inline void arch_touch_nmi_watchdog(void) { } diff --git a/kernel/watchdog.c b/kernel/watchdog.c index a351ab0..010fcc3 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -29,7 +29,7 @@ static DEFINE_MUTEX(watchdog_mutex); -#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG) +#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64) # define WATCHDOG_HARDLOCKUP_DEFAULT 1 #else # define WATCHDOG_HARDLOCKUP_DEFAULT 0 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index a0b0c4d..e946643 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1050,15 +1050,10 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY # sparc64: has a custom implementation which is not using the common # hardlockup command line options and sysctl interface. # -# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific -# implementaion. It is automatically enabled also for other arch-specific -# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check -# of avaialable and supported variants quite tricky. -# config HARDLOCKUP_DETECTOR bool "Detect Hard Lockups" - depends on DEBUG_KERNEL && !S390 - depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH + depends on DEBUG_KERNEL && !S390 && !HAVE_HARDLOCKUP_DETECTOR_SPARC64 + depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH imply HARDLOCKUP_DETECTOR_PERF imply HARDLOCKUP_DETECTOR_BUDDY select LOCKUP_DETECTOR @@ -1079,7 +1074,7 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY bool "Prefer the buddy CPU hardlockup detector" depends on HARDLOCKUP_DETECTOR depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY - depends on !HAVE_NMI_WATCHDOG + depends on !HAVE_HARLOCKUP_DETECTOR_ARCH help Say Y here to prefer the buddy hardlockup detector over the perf one. @@ -1095,7 +1090,7 @@ config HARDLOCKUP_DETECTOR_PERF bool depends on HARDLOCKUP_DETECTOR depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY - depends on !HAVE_NMI_WATCHDOG + depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER config HARDLOCKUP_DETECTOR_BUDDY @@ -1103,7 +1098,7 @@ config HARDLOCKUP_DETECTOR_BUDDY depends on HARDLOCKUP_DETECTOR depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY - depends on !HAVE_NMI_WATCHDOG + depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER # -- 2.7.4