From a4d3b8b050d5dbd61f7baeb249e702bc0a75f981 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 5 Dec 2014 14:31:09 +0800 Subject: [PATCH] drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done HDMI_IH_I2CMPHY_STAT0 is a clear on write register, which indicates i2cm operation status(i2c transfer done or error), every hdmi phy register configuration must check this register to make sure the configuration has complete. But the indication bit should be cleared after check, otherwise the corresponding bit will hold on forever, this may give a wrong signal for next check. Signed-off-by: Andy Yan Tested-by: Russell King Acked-by: Russell King Signed-off-by: Philipp Zabel --- drivers/gpu/drm/bridge/dw_hdmi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c index 8ef21da..d39dccd 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi.c +++ b/drivers/gpu/drm/bridge/dw_hdmi.c @@ -666,11 +666,15 @@ static inline void hdmi_phy_test_dout(struct dw_hdmi *hdmi, static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec) { - while ((hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) { + u32 val; + + while ((val = hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) { if (msec-- == 0) return false; udelay(1000); } + hdmi_writeb(hdmi, val, HDMI_IH_I2CMPHY_STAT0); + return true; } -- 2.7.4