From a3cabb271ea66739704497102536fb01bb72fe37 Mon Sep 17 00:00:00 2001 From: Uwe Koziolek Date: Thu, 14 Jun 2007 23:40:43 +0200 Subject: [PATCH] libata: PATA-mode fixes for sis_sata Changed PATA handler for PATA-ports used by sata_sis. This patch was originally submitted by Jeff Garzik. Added PCI-ID 1180 for SiS966 Controller in pata_sis. The 1180 mode is fully compatible to other SiS PATA-controller. The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis. 1183 is not working if simply added to pata_sis. This handling fixes issues with SiS968. Signed-off-by: Uwe Koziolek Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 46 ++++++++++++++++++++++++++++++++++++++++++++-- drivers/ata/sata_sis.c | 39 +++++++++++++++++++-------------------- drivers/ata/sis.h | 2 +- 3 files changed, 64 insertions(+), 23 deletions(-) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index ec3ae93..cfe4ec6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -560,6 +560,40 @@ static const struct ata_port_operations sis_133_ops = { .port_start = ata_port_start, }; +static const struct ata_port_operations sis_133_for_sata_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = sis_133_cable_detect, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, + + .port_start = ata_port_start, +}; + static const struct ata_port_operations sis_133_early_ops = { .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, @@ -733,13 +767,20 @@ static const struct ata_port_info sis_info100_early = { .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; -const struct ata_port_info sis_info133 = { +static const struct ata_port_info sis_info133 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; +const struct ata_port_info sis_info133_for_sata = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_for_sata_ops, +}; static const struct ata_port_info sis_info133_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -749,7 +790,7 @@ static const struct ata_port_info sis_info133_early = { }; /* Privately shared with the SiS180 SATA driver, not for use elsewhere */ -EXPORT_SYMBOL_GPL(sis_info133); +EXPORT_SYMBOL_GPL(sis_info133_for_sata); static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) { @@ -975,6 +1016,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static const struct pci_device_id sis_pci_tbl[] = { { PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */ { PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */ + { PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */ { } }; diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 221099d..f111c98 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -72,8 +72,8 @@ static const struct pci_device_id sis_pci_tbl[] = { { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */ { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */ { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */ - { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */ - { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */ + { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */ + { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */ { } /* terminate list */ }; @@ -161,7 +161,6 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) case 0x0182: case 0x0183: case 0x1182: - case 0x1183: addr += SIS182_SATA1_OFS; break; } @@ -183,8 +182,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) pci_read_config_dword(pdev, cfg_addr, &val); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || - (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || + (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) pci_read_config_dword(pdev, cfg_addr+0x10, &val2); return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */ @@ -203,8 +202,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val pci_write_config_dword(pdev, cfg_addr, val); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || - (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || + (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) pci_write_config_dword(pdev, cfg_addr+0x10, val); } @@ -224,8 +223,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || - (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || + (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); return (val | val2) & 0xfffffffb; @@ -245,8 +244,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) sis_scr_cfg_write(ap, sc_reg, val); else { iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || - (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || + (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); } } @@ -293,11 +292,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* The PATA-handling is provided by pata_sis */ switch (pmr & 0x30) { case 0x10: - ppi[1] = &sis_info133; + ppi[1] = &sis_info133_for_sata; break; case 0x30: - ppi[0] = &sis_info133; + ppi[0] = &sis_info133_for_sata; break; } if ((pmr & SIS_PMR_COMBINED) == 0) { @@ -324,14 +323,14 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) break; case 0x1182: + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n"); + pi.flags |= ATA_FLAG_SLAVE_POSS; + break; + case 0x1183: - pci_read_config_dword(pdev, 0x64, &val); - if (val & 0x10000000) { - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n"); - } else { - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n"); - pi.flags |= ATA_FLAG_SLAVE_POSS; - } + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n"); + ppi[0] = &sis_info133_for_sata; + ppi[1] = &sis_info133_for_sata; break; } diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h index 0f2208d..f7f3eeb 100644 --- a/drivers/ata/sis.h +++ b/drivers/ata/sis.h @@ -2,4 +2,4 @@ struct ata_port_info; /* pata_sis.c */ -extern const struct ata_port_info sis_info133; +extern const struct ata_port_info sis_info133_for_sata; -- 2.7.4