From a3958c271c2d59eef1f198cd8eda75f9b022c130 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Fri, 18 Aug 2023 13:19:55 +0900 Subject: [PATCH] clk: starfive: jh7110-sys: Set PLL0 rate to 1.5GHz Set PLL0 rate to 1.5GHz. Change the parent of cpu_root clock and the divider of cpu_core before setting. This patch is taken from patch that was posted on mailing. Signed-off-by: Xingyu Wu Reviewed-by: Hal Feng Change-Id: Ib418a6321555c045effcb0580e0c91d80a7a2043 Signed-off-by: Jaehoon Chung --- drivers/clk/starfive/clk-starfive-jh7110-sys.c | 47 +++++++++++++++++++++++++- 1 file changed, 46 insertions(+), 1 deletion(-) diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c index 3884eff..b6b9e96 100644 --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c @@ -501,7 +501,52 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev) if (ret) return ret; - return jh7110_reset_controller_register(priv, "rst-sys", 0); + ret = jh7110_reset_controller_register(priv, "rst-sys", 0); + if (ret) + return ret; + + /* + * Set PLL0 rate to 1.5GHz + * In order to not affect the cpu when the PLL0 rate is changing, + * we need to switch the parent of cpu_root clock to osc clock first, + * and then switch back after setting the PLL0 rate. + */ + pllclk = clk_get(priv->dev, "pll0_out"); + if (!IS_ERR(pllclk)) { + struct clk *osc = clk_get(&pdev->dev, "osc"); + struct clk *cpu_root = priv->reg[JH7110_SYSCLK_CPU_ROOT].hw.clk; + struct clk *cpu_core = priv->reg[JH7110_SYSCLK_CPU_CORE].hw.clk; + + if (IS_ERR(osc)) { + clk_put(pllclk); + return PTR_ERR(osc); + } + + /* + * CPU need voltage regulation by CPUfreq if set 1.5GHz. + * So in this driver, cpu_core need to be set the divider to be 2 first + * and will be 750M after setting parent. + */ + ret = clk_set_rate(cpu_core, clk_get_rate(cpu_core) / 2); + if (ret) + goto failed_set; + + ret = clk_set_parent(cpu_root, osc); + if (ret) + goto failed_set; + + ret = clk_set_rate(pllclk, 1500000000); + if (ret) + goto failed_set; + + ret = clk_set_parent(cpu_root, pllclk); + +failed_set: + clk_put(pllclk); + clk_put(osc); + } + + return ret; } static const struct of_device_id jh7110_syscrg_match[] = { -- 2.7.4