From a38e80d02eba27319f9ebe5414c6fe6272c9fb2c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:44:12 +0206 Subject: [PATCH] serial: sc16is7xx: Use port lock wrappers [ Upstream commit b465848be8a652e2c5fefe102661fb660cff8497 ] When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-56-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt") Signed-off-by: Sasha Levin --- drivers/tty/serial/sc16is7xx.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 3276d21..425093c 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -642,9 +642,9 @@ static void sc16is7xx_handle_tx(struct uart_port *port) } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); sc16is7xx_stop_tx(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); return; } @@ -670,13 +670,13 @@ static void sc16is7xx_handle_tx(struct uart_port *port) sc16is7xx_fifo_write(port, to_send); } - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (uart_circ_empty(xmit)) sc16is7xx_stop_tx(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static unsigned int sc16is7xx_get_hwmctrl(struct uart_port *port) @@ -707,7 +707,7 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) one->old_mctrl = status; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if ((changed & TIOCM_RNG) && (status & TIOCM_RNG)) port->icount.rng++; if (changed & TIOCM_DSR) @@ -718,7 +718,7 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) uart_handle_cts_change(port, status & TIOCM_CTS); wake_up_interruptible(&port->state->port.delta_msr_wait); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) @@ -812,9 +812,9 @@ static void sc16is7xx_tx_proc(struct kthread_work *ws) sc16is7xx_handle_tx(port); mutex_unlock(&one->efr_lock); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void sc16is7xx_reconf_rs485(struct uart_port *port) @@ -825,14 +825,14 @@ static void sc16is7xx_reconf_rs485(struct uart_port *port) struct serial_rs485 *rs485 = &port->rs485; unsigned long irqflags; - spin_lock_irqsave(&port->lock, irqflags); + uart_port_lock_irqsave(port, &irqflags); if (rs485->flags & SER_RS485_ENABLED) { efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT; if (rs485->flags & SER_RS485_RTS_AFTER_SEND) efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT; } - spin_unlock_irqrestore(&port->lock, irqflags); + uart_port_unlock_irqrestore(port, irqflags); sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr); } @@ -843,10 +843,10 @@ static void sc16is7xx_reg_proc(struct kthread_work *ws) struct sc16is7xx_one_config config; unsigned long irqflags; - spin_lock_irqsave(&one->port.lock, irqflags); + uart_port_lock_irqsave(&one->port, &irqflags); config = one->config; memset(&one->config, 0, sizeof(one->config)); - spin_unlock_irqrestore(&one->port.lock, irqflags); + uart_port_unlock_irqrestore(&one->port, irqflags); if (config.flags & SC16IS7XX_RECONF_MD) { u8 mcr = 0; @@ -952,18 +952,18 @@ static void sc16is7xx_throttle(struct uart_port *port) * value set in MCR register. Stop reading data from RX FIFO so the * AutoRTS feature will de-activate RTS output. */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void sc16is7xx_unthrottle(struct uart_port *port) { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); sc16is7xx_ier_set(port, SC16IS7XX_IER_RDI_BIT); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static unsigned int sc16is7xx_tx_empty(struct uart_port *port) @@ -1101,7 +1101,7 @@ static void sc16is7xx_set_termios(struct uart_port *port, /* Setup baudrate generator */ baud = sc16is7xx_set_baud(port, baud); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); @@ -1109,7 +1109,7 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (UART_ENABLE_MS(port, termios->c_cflag)) sc16is7xx_enable_ms(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static int sc16is7xx_config_rs485(struct uart_port *port, struct ktermios *termios, @@ -1195,9 +1195,9 @@ static int sc16is7xx_startup(struct uart_port *port) sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); /* Enable modem status polling */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); sc16is7xx_enable_ms(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); return 0; } -- 2.7.4