From a272c99d30000e5daadcf20a22df27f98ac215dd Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 22 May 2015 18:14:23 +0200 Subject: [PATCH] samsung: usb: phy: Support for DWC3 PHY New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have been added to u-boot to provide proper PHY handling at Exynos5 SoCs. This code is used thereafter in the board_usb_init() call. Signed-off-by: Lukasz Majewski Cc: Minkyu Kang Cc: Marek Vasut --- drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/samsung_usb_phy.c | 78 ++++++++++++++++++++++++++++++++++++++ include/samsung-usb-phy-uboot.h | 16 ++++++++ 3 files changed, 95 insertions(+) create mode 100644 drivers/usb/dwc3/samsung_usb_phy.c create mode 100644 include/samsung-usb-phy-uboot.h diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index e455a52..02bb216 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -6,3 +6,4 @@ dwc3-y += gadget.o ep0.o obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o +obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o diff --git a/drivers/usb/dwc3/samsung_usb_phy.c b/drivers/usb/dwc3/samsung_usb_phy.c new file mode 100644 index 0000000..4220986 --- /dev/null +++ b/drivers/usb/dwc3/samsung_usb_phy.c @@ -0,0 +1,78 @@ +/** + * samsung_usb_phy.c - DesignWare USB3 (DWC3) PHY handling file + * + * Copyright (C) 2015 Samsung Electronics + * + * Author: Joonyoung Shim + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include + +void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy) +{ + u32 reg; + + /* Reset USB 3.0 PHY */ + writel(0x0, &phy->phy_reg0); + + clrbits_le32(&phy->phy_param0, + /* Select PHY CLK source */ + PHYPARAM0_REF_USE_PAD | + /* Set Loss-of-Signal Detector sensitivity */ + PHYPARAM0_REF_LOSLEVEL_MASK); + setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL); + + + writel(0x0, &phy->phy_resume); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + setbits_le32(&phy->link_system, + LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20)); + + /* Set Tx De-Emphasis level */ + clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK); + setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH); + + setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL); + + /* PHYTEST POWERDOWN Control */ + clrbits_le32(&phy->phy_test, + PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi); + + /* Use core clock from main PLL */ + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | + /* Default 24Mhz crystal clock */ + PHYCLKRST_FSEL(FSEL_CLKSEL_24M) | + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0) | + /* Force PortReset of PHY */ + PHYCLKRST_PORTRESET | + /* Digital power supply in normal operating mode */ + PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN; + + writel(reg, &phy->phy_clk_rst); + + /* giving time to Phy clock to settle before resetting */ + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, &phy->phy_clk_rst); +} diff --git a/include/samsung-usb-phy-uboot.h b/include/samsung-usb-phy-uboot.h new file mode 100644 index 0000000..9f37560 --- /dev/null +++ b/include/samsung-usb-phy-uboot.h @@ -0,0 +1,16 @@ +/* include/samsung-usb-phy-uboot.h + * + * Copyright (c) 2015 Samsung Electronics + * + * USB3 (DWC3) PHY uboot init + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SAMSUNG_USB_PHY_UBOOT_H_ +#define __SAMSUNG_USB_PHY_UBOOT_H_ + +#include + +void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy); +#endif /* __SAMSUNG_USB_PHY_UBOOT_H_ */ -- 2.7.4