From a1c87c0b27059b4155c7aba6b34810c889e8b6a9 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Fri, 21 Apr 2023 16:10:01 +0200 Subject: [PATCH] ALSA: emu10k1: fix access to Audigy GPIO port As the register definition clearly states, this is a 16-bit register, yet we did all accesses as 32-bit. The writes in particular would have the potential to clear the TIMER register (depending on how the bus/card actually handles the too long writes). This commit also introduces a separate define A_GPIO which aliases A_IOCFG, which better reflects the distinct usage on E-MU cards. This is done in the same commit to keep the churn down, as we're touching all involved lines anyway. Signed-off-by: Oswald Buddenhagen Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai --- include/sound/emu10k1.h | 7 ++++- sound/pci/emu10k1/emu10k1_main.c | 62 ++++++++++++++++++++-------------------- sound/pci/emu10k1/emumixer.c | 14 ++++----- sound/pci/emu10k1/io.c | 14 ++++----- 4 files changed, 51 insertions(+), 46 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 00c2d8c..89dbd2e 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -251,11 +251,16 @@ #define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */ #define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */ -#define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */ +#define A_GPIO 0x18 /* GPIO on Audigy card (16bits) */ #define A_GPINPUT_MASK 0xff00 #define A_GPOUTPUT_MASK 0x00ff +// The GPIO port is used for I/O config on Sound Blasters; +// card-specific info can be found in the emu_chip_details table. +// On E-MU cards the port is used as the interface to the FPGA. + // Audigy output/GPIO stuff taken from the kX drivers +#define A_IOCFG A_GPIO #define A_IOCFG_GPOUT0 0x0044 /* analog/digital */ #define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */ #define A_IOCFG_ENABLE_DIGITAL 0x0004 diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 4af7c95..29b6da6 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -223,8 +223,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume) */ outl(0x7a0000, emu->port + 0x20); outl(0xFF000000, emu->port + 0x24); - tmp = inl(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */ - outl(tmp, emu->port + A_IOCFG); + tmp = inw(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */ + outw(tmp, emu->port + A_IOCFG); } if (emu->card_capabilities->spi_dac) { /* Audigy 2 ZS Notebook with DAC Wolfson WM8768/WM8568 */ int size, n; @@ -244,15 +244,15 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume) * GPIO6: Unknown * GPIO7: Unknown */ - outl(0x76, emu->port + A_IOCFG); /* Windows uses 0x3f76 */ + outw(0x76, emu->port + A_IOCFG); /* Windows uses 0x3f76 */ } if (emu->card_capabilities->i2c_adc) { /* Audigy 2 ZS Notebook with ADC Wolfson WM8775 */ int size, n; snd_emu10k1_ptr20_write(emu, P17V_I2S_SRC_SEL, 0, 0x2020205f); - tmp = inl(emu->port + A_IOCFG); - outl(tmp | 0x4, emu->port + A_IOCFG); /* Set bit 2 for mic input */ - tmp = inl(emu->port + A_IOCFG); + tmp = inw(emu->port + A_IOCFG); + outw(tmp | 0x4, emu->port + A_IOCFG); /* Set bit 2 for mic input */ + tmp = inw(emu->port + A_IOCFG); size = ARRAY_SIZE(i2c_adc_init); for (n = 0; n < size; n++) snd_emu10k1_i2c_write(emu, i2c_adc_init[n][0], i2c_adc_init[n][1]); @@ -308,12 +308,12 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume) } else if (emu->card_capabilities->i2c_adc) { ; /* Disable A_IOCFG for Audigy 2 ZS Notebook */ } else if (emu->audigy) { - unsigned int reg = inl(emu->port + A_IOCFG); - outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG); + u16 reg = inw(emu->port + A_IOCFG); + outw(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG); udelay(500); - outl(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG); + outw(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG); udelay(100); - outl(reg, emu->port + A_IOCFG); + outw(reg, emu->port + A_IOCFG); } else { unsigned int reg = inl(emu->port + HCFG); outl(reg | HCFG_GPOUT2, emu->port + HCFG); @@ -329,8 +329,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume) } else if (emu->card_capabilities->i2c_adc) { ; /* Disable A_IOCFG for Audigy 2 ZS Notebook */ } else if (emu->audigy) { /* enable analog output */ - unsigned int reg = inl(emu->port + A_IOCFG); - outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG); + u16 reg = inw(emu->port + A_IOCFG); + outw(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG); } if (emu->address_mode == 0) { @@ -354,19 +354,19 @@ static void snd_emu10k1_audio_enable(struct snd_emu10k1 *emu) } else if (emu->card_capabilities->i2c_adc) { ; /* Disable A_IOCFG for Audigy 2 ZS Notebook */ } else if (emu->audigy) { - outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG); + outw(inw(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG); if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ /* Unmute Analog now. Set GPO6 to 1 for Apollo. * This has to be done after init ALice3 I2SOut beyond 48KHz. * So, sequence is important. */ - outl(inl(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG); + outw(inw(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG); } else if (emu->card_capabilities->ca0108_chip) { /* audigy2 value */ /* Unmute Analog now. */ - outl(inl(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG); + outw(inw(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG); } else { /* Disable routing from AC97 line out to Front speakers */ - outl(inl(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG); + outw(inw(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG); } } @@ -651,9 +651,9 @@ static int snd_emu1010_load_firmware_entry(struct snd_emu10k1 *emu, const struct firmware *fw_entry) { int n, i; - int reg; - int value; - __always_unused unsigned int write_post; + u16 reg; + u8 value; + __always_unused u16 write_post; unsigned long flags; if (!fw_entry) @@ -666,11 +666,11 @@ static int snd_emu1010_load_firmware_entry(struct snd_emu10k1 *emu, * FPGA CONFIG OFF -> FPGA PGMN */ spin_lock_irqsave(&emu->emu_lock, flags); - outl(0x00, emu->port + A_IOCFG); /* Set PGMN low for 1uS. */ - write_post = inl(emu->port + A_IOCFG); + outw(0x00, emu->port + A_GPIO); /* Set PGMN low for 1uS. */ + write_post = inw(emu->port + A_GPIO); udelay(100); - outl(0x80, emu->port + A_IOCFG); /* Leave bit 7 set during netlist setup. */ - write_post = inl(emu->port + A_IOCFG); + outw(0x80, emu->port + A_GPIO); /* Leave bit 7 set during netlist setup. */ + write_post = inw(emu->port + A_GPIO); udelay(100); /* Allow FPGA memory to clean */ for (n = 0; n < fw_entry->size; n++) { value = fw_entry->data[n]; @@ -679,15 +679,15 @@ static int snd_emu1010_load_firmware_entry(struct snd_emu10k1 *emu, if (value & 0x1) reg = reg | 0x20; value = value >> 1; - outl(reg, emu->port + A_IOCFG); - write_post = inl(emu->port + A_IOCFG); - outl(reg | 0x40, emu->port + A_IOCFG); - write_post = inl(emu->port + A_IOCFG); + outw(reg, emu->port + A_GPIO); + write_post = inw(emu->port + A_GPIO); + outw(reg | 0x40, emu->port + A_GPIO); + write_post = inw(emu->port + A_GPIO); } } /* After programming, set GPIO bit 4 high again. */ - outl(0x10, emu->port + A_IOCFG); - write_post = inl(emu->port + A_IOCFG); + outw(0x10, emu->port + A_GPIO); + write_post = inw(emu->port + A_GPIO); spin_unlock_irqrestore(&emu->emu_lock, flags); return 0; @@ -2053,7 +2053,7 @@ void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu) *val = snd_emu10k1_ptr_read(emu, *reg, i); } if (emu->audigy) - emu->saved_a_iocfg = inl(emu->port + A_IOCFG); + emu->saved_a_iocfg = inw(emu->port + A_IOCFG); emu->saved_hcfg = inl(emu->port + HCFG); } @@ -2080,7 +2080,7 @@ void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu) /* resore for spdif */ if (emu->audigy) - outl(emu->saved_a_iocfg, emu->port + A_IOCFG); + outw(emu->saved_a_iocfg, emu->port + A_IOCFG); outl(emu->saved_hcfg, emu->port + HCFG); val = emu->saved_ptr; diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 3c115f8..754d910 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -924,7 +924,7 @@ static int snd_audigy_i2c_capture_source_put(struct snd_kcontrol *kcontrol, struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol); unsigned int source_id; unsigned int ngain, ogain; - u32 gpio; + u16 gpio; int change = 0; unsigned long flags; u32 source; @@ -941,11 +941,11 @@ static int snd_audigy_i2c_capture_source_put(struct snd_kcontrol *kcontrol, if (change) { snd_emu10k1_i2c_write(emu, ADC_MUX, 0); /* Mute input */ spin_lock_irqsave(&emu->emu_lock, flags); - gpio = inl(emu->port + A_IOCFG); + gpio = inw(emu->port + A_IOCFG); if (source_id==0) - outl(gpio | 0x4, emu->port + A_IOCFG); + outw(gpio | 0x4, emu->port + A_IOCFG); else - outl(gpio & ~0x4, emu->port + A_IOCFG); + outw(gpio & ~0x4, emu->port + A_IOCFG); spin_unlock_irqrestore(&emu->emu_lock, flags); ngain = emu->i2c_capture_volume[source_id][0]; /* Left */ @@ -1632,7 +1632,7 @@ static int snd_emu10k1_shared_spdif_get(struct snd_kcontrol *kcontrol, struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol); if (emu->audigy) - ucontrol->value.integer.value[0] = inl(emu->port + A_IOCFG) & A_IOCFG_GPOUT0 ? 1 : 0; + ucontrol->value.integer.value[0] = inw(emu->port + A_IOCFG) & A_IOCFG_GPOUT0 ? 1 : 0; else ucontrol->value.integer.value[0] = inl(emu->port + HCFG) & HCFG_GPOUT0 ? 1 : 0; if (emu->card_capabilities->invert_shared_spdif) @@ -1657,13 +1657,13 @@ static int snd_emu10k1_shared_spdif_put(struct snd_kcontrol *kcontrol, if ( emu->card_capabilities->i2c_adc) { /* Do nothing for Audigy 2 ZS Notebook */ } else if (emu->audigy) { - reg = inl(emu->port + A_IOCFG); + reg = inw(emu->port + A_IOCFG); val = sw ? A_IOCFG_GPOUT0 : 0; change = (reg & A_IOCFG_GPOUT0) != val; if (change) { reg &= ~A_IOCFG_GPOUT0; reg |= val; - outl(reg | val, emu->port + A_IOCFG); + outw(reg | val, emu->port + A_IOCFG); } } reg = inl(emu->port + HCFG); diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index 35bc73d9..f013468 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -243,13 +243,13 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value) if (snd_BUG_ON(value > 0x3f)) /* 0 to 0x3f are values */ return; spin_lock_irqsave(&emu->emu_lock, flags); - outl(reg, emu->port + A_IOCFG); + outw(reg, emu->port + A_GPIO); udelay(10); - outl(reg | 0x80, emu->port + A_IOCFG); /* High bit clocks the value into the fpga. */ + outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ udelay(10); - outl(value, emu->port + A_IOCFG); + outw(value, emu->port + A_GPIO); udelay(10); - outl(value | 0x80 , emu->port + A_IOCFG); /* High bit clocks the value into the fpga. */ + outw(value | 0x80 , emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ spin_unlock_irqrestore(&emu->emu_lock, flags); } @@ -260,11 +260,11 @@ void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) return; reg += 0x40; /* 0x40 upwards are registers. */ spin_lock_irqsave(&emu->emu_lock, flags); - outl(reg, emu->port + A_IOCFG); + outw(reg, emu->port + A_GPIO); udelay(10); - outl(reg | 0x80, emu->port + A_IOCFG); /* High bit clocks the value into the fpga. */ + outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ udelay(10); - *value = ((inl(emu->port + A_IOCFG) >> 8) & 0x7f); + *value = ((inw(emu->port + A_GPIO) >> 8) & 0x7f); spin_unlock_irqrestore(&emu->emu_lock, flags); } -- 2.7.4