From a1b4440314edca8e2016f2819d4655453e6aff44 Mon Sep 17 00:00:00 2001 From: Cyril Chemparathy Date: Mon, 20 Sep 2010 12:26:42 -0400 Subject: [PATCH] davinci: add keypad config for tnetv107x evm board This patch adds evm board specific keymap definitions and controller configuration data for on-chip keypad controller on tnetv107x silicon. Signed-off-by: Cyril Chemparathy Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-tnetv107x-evm.c | 56 +++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index fe2a9d9..5afa8fc 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include + #include #include @@ -141,10 +144,63 @@ static struct davinci_uart_config serial_config __initconst = { .enabled_uarts = BIT(1), }; +static const uint32_t keymap[] = { + KEY(0, 0, KEY_NUMERIC_1), + KEY(0, 1, KEY_NUMERIC_2), + KEY(0, 2, KEY_NUMERIC_3), + KEY(0, 3, KEY_FN_F1), + KEY(0, 4, KEY_MENU), + + KEY(1, 0, KEY_NUMERIC_4), + KEY(1, 1, KEY_NUMERIC_5), + KEY(1, 2, KEY_NUMERIC_6), + KEY(1, 3, KEY_UP), + KEY(1, 4, KEY_FN_F2), + + KEY(2, 0, KEY_NUMERIC_7), + KEY(2, 1, KEY_NUMERIC_8), + KEY(2, 2, KEY_NUMERIC_9), + KEY(2, 3, KEY_LEFT), + KEY(2, 4, KEY_ENTER), + + KEY(3, 0, KEY_NUMERIC_STAR), + KEY(3, 1, KEY_NUMERIC_0), + KEY(3, 2, KEY_NUMERIC_POUND), + KEY(3, 3, KEY_DOWN), + KEY(3, 4, KEY_RIGHT), + + KEY(4, 0, KEY_FN_F3), + KEY(4, 1, KEY_FN_F4), + KEY(4, 2, KEY_MUTE), + KEY(4, 3, KEY_HOME), + KEY(4, 4, KEY_BACK), + + KEY(5, 0, KEY_VOLUMEDOWN), + KEY(5, 1, KEY_VOLUMEUP), + KEY(5, 2, KEY_F1), + KEY(5, 3, KEY_F2), + KEY(5, 4, KEY_F3), +}; + +static const struct matrix_keymap_data keymap_data = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct matrix_keypad_platform_data keypad_config = { + .keymap_data = &keymap_data, + .num_row_gpios = 6, + .num_col_gpios = 5, + .debounce_ms = 0, /* minimum */ + .active_low = 0, /* pull up realization */ + .no_autorepeat = 0, +}; + static struct tnetv107x_device_info evm_device_info __initconst = { .serial_config = &serial_config, .mmc_config[1] = &mmc_config, /* controller 1 */ .nand_config[0] = &nand_config, /* chip select 0 */ + .keypad_config = &keypad_config, }; static __init void tnetv107x_evm_board_init(void) -- 2.7.4