From a1769bb68a850508a492e3674ab1e5e479b11254 Mon Sep 17 00:00:00 2001 From: Zhi Chen Date: Tue, 14 Jan 2020 12:35:21 +0800 Subject: [PATCH] Revert "ath10k: fix DMA related firmware crashes on multiple devices" This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/hw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 21b7a2a..775fd62 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -816,7 +816,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define TARGET_10_4_TX_DBG_LOG_SIZE 1024 #define TARGET_10_4_NUM_WDS_ENTRIES 32 -#define TARGET_10_4_DMA_BURST_SIZE 0 +#define TARGET_10_4_DMA_BURST_SIZE 1 #define TARGET_10_4_MAC_AGGR_DELIM 0 #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0 -- 2.7.4