From a0441891373fe2db582075a4639fdfcccea470c1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 9 May 2007 13:02:43 +0200 Subject: [PATCH] qla1280: sg chaining support Interesting hardware setup... Signed-off-by: Jens Axboe --- drivers/scsi/qla1280.c | 66 ++++++++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index fba8aa8..1f17dec 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -2775,7 +2775,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) struct device_reg __iomem *reg = ha->iobase; struct scsi_cmnd *cmd = sp->cmd; cmd_a64_entry_t *pkt; - struct scatterlist *sg = NULL; + struct scatterlist *sg = NULL, *s; __le32 *dword_ptr; dma_addr_t dma_handle; int status = 0; @@ -2889,13 +2889,16 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) * Load data segments. */ if (seg_cnt) { /* If data transfer. */ + int remseg = seg_cnt; /* Setup packet address segment pointer. */ dword_ptr = (u32 *)&pkt->dseg_0_address; if (cmd->use_sg) { /* If scatter gather */ /* Load command entry data segments. */ - for (cnt = 0; cnt < 2 && seg_cnt; cnt++, seg_cnt--) { - dma_handle = sg_dma_address(sg); + for_each_sg(sg, s, seg_cnt, cnt) { + if (cnt == 2) + break; + dma_handle = sg_dma_address(s); #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ha->flags.use_pci_vchannel) sn_pci_set_vchan(ha->pdev, @@ -2906,12 +2909,12 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) cpu_to_le32(pci_dma_lo32(dma_handle)); *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle)); - *dword_ptr++ = cpu_to_le32(sg_dma_len(sg)); - sg++; + *dword_ptr++ = cpu_to_le32(sg_dma_len(s)); dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n", cpu_to_le32(pci_dma_hi32(dma_handle)), cpu_to_le32(pci_dma_lo32(dma_handle)), - cpu_to_le32(sg_dma_len(sg))); + cpu_to_le32(sg_dma_len(sg_next(s)))); + remseg--; } dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather " "command packet data - b %i, t %i, l %i \n", @@ -2926,7 +2929,9 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) dprintk(3, "S/G Building Continuation...seg_cnt=0x%x " "remains\n", seg_cnt); - while (seg_cnt > 0) { + while (remseg > 0) { + /* Update sg start */ + sg = s; /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { @@ -2952,9 +2957,10 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address; /* Load continuation entry data segments. */ - for (cnt = 0; cnt < 5 && seg_cnt; - cnt++, seg_cnt--) { - dma_handle = sg_dma_address(sg); + for_each_sg(sg, s, remseg, cnt) { + if (cnt == 5) + break; + dma_handle = sg_dma_address(s); #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ha->flags.use_pci_vchannel) sn_pci_set_vchan(ha->pdev, @@ -2966,12 +2972,12 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle)); *dword_ptr++ = - cpu_to_le32(sg_dma_len(sg)); + cpu_to_le32(sg_dma_len(s)); dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n", cpu_to_le32(pci_dma_hi32(dma_handle)), cpu_to_le32(pci_dma_lo32(dma_handle)), - cpu_to_le32(sg_dma_len(sg))); - sg++; + cpu_to_le32(sg_dma_len(s))); + remseg--; } dprintk(5, "qla1280_64bit_start_scsi: " "continuation packet data - b %i, t " @@ -3062,7 +3068,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) struct device_reg __iomem *reg = ha->iobase; struct scsi_cmnd *cmd = sp->cmd; struct cmd_entry *pkt; - struct scatterlist *sg = NULL; + struct scatterlist *sg = NULL, *s; __le32 *dword_ptr; int status = 0; int cnt; @@ -3188,6 +3194,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) * Load data segments. */ if (seg_cnt) { + int remseg = seg_cnt; /* Setup packet address segment pointer. */ dword_ptr = &pkt->dseg_0_address; @@ -3196,22 +3203,25 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) qla1280_dump_buffer(1, (char *)sg, 4 * 16); /* Load command entry data segments. */ - for (cnt = 0; cnt < 4 && seg_cnt; cnt++, seg_cnt--) { + for_each_sg(sg, s, seg_cnt, cnt) { + if (cnt == 4) + break; *dword_ptr++ = - cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))); - *dword_ptr++ = - cpu_to_le32(sg_dma_len(sg)); + cpu_to_le32(pci_dma_lo32(sg_dma_address(s))); + *dword_ptr++ = cpu_to_le32(sg_dma_len(s)); dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n", - (pci_dma_lo32(sg_dma_address(sg))), - (sg_dma_len(sg))); - sg++; + (pci_dma_lo32(sg_dma_address(s))), + (sg_dma_len(s))); + remseg--; } /* * Build continuation packets. */ dprintk(3, "S/G Building Continuation" "...seg_cnt=0x%x remains\n", seg_cnt); - while (seg_cnt > 0) { + while (remseg > 0) { + /* Continue from end point */ + sg = s; /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { @@ -3239,18 +3249,16 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) &((struct cont_entry *) pkt)->dseg_0_address; /* Load continuation entry data segments. */ - for (cnt = 0; cnt < 7 && seg_cnt; - cnt++, seg_cnt--) { + for_each_sg(sg, s, remseg, cnt) { *dword_ptr++ = - cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))); + cpu_to_le32(pci_dma_lo32(sg_dma_address(s))); *dword_ptr++ = - cpu_to_le32(sg_dma_len(sg)); + cpu_to_le32(sg_dma_len(s)); dprintk(1, "S/G Segment Cont. phys_addr=0x%x, " "len=0x%x\n", - cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))), - cpu_to_le32(sg_dma_len(sg))); - sg++; + cpu_to_le32(pci_dma_lo32(sg_dma_address(s))), + cpu_to_le32(sg_dma_len(s))); } dprintk(5, "qla1280_32bit_start_scsi: " "continuation packet data - " -- 2.7.4