From 9e5f1b273e6abdd7f17b15a65ff5414c6c94384b Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 27 Feb 2018 10:06:51 +0200 Subject: [PATCH] can: xilinx_can: add support for Xilinx CAN FD core Add support for Xilinx CAN FD core. The major difference from the previously supported cores is that there are TX mailboxes instead of a TX FIFO and the RX FIFO access method is different. We only transmit one frame at a time to prevent the HW from reordering frames (it uses CAN ID priority order). Support for CAN FD protocol is not added yet. v2: Removed unnecessary "rx-mode" DT property and wrapped some long lines. Signed-off-by: Anssi Hannula Cc: Michal Simek Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 303 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 259 insertions(+), 44 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 204a7890..045f084 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -2,7 +2,7 @@ * * Copyright (C) 2012 - 2014 Xilinx, Inc. * Copyright (C) 2009 PetaLogix. All rights reserved. - * Copyright (C) 2017 Sandvik Mining and Construction Oy + * Copyright (C) 2017 - 2018 Sandvik Mining and Construction Oy * * Description: * This driver is developed for Axi CAN IP and for Zynq CANPS Controller. @@ -51,8 +51,18 @@ enum xcan_reg { XCAN_ISR_OFFSET = 0x1C, /* Interrupt status */ XCAN_IER_OFFSET = 0x20, /* Interrupt enable */ XCAN_ICR_OFFSET = 0x24, /* Interrupt clear */ + + /* not on CAN FD cores */ XCAN_TXFIFO_OFFSET = 0x30, /* TX FIFO base */ XCAN_RXFIFO_OFFSET = 0x50, /* RX FIFO base */ + XCAN_AFR_OFFSET = 0x60, /* Acceptance Filter */ + + /* only on CAN FD cores */ + XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */ + XCAN_AFR_EXT_OFFSET = 0x00E0, /* Acceptance Filter */ + XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */ + XCAN_TXMSG_BASE_OFFSET = 0x0100, /* TX Message Space */ + XCAN_RXMSG_BASE_OFFSET = 0x1100, /* RX Message Space */ }; #define XCAN_FRAME_ID_OFFSET(frame_base) ((frame_base) + 0x00) @@ -60,6 +70,15 @@ enum xcan_reg { #define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08) #define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C) +#define XCAN_CANFD_FRAME_SIZE 0x48 +#define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \ + XCAN_CANFD_FRAME_SIZE * (n)) +#define XCAN_RXMSG_FRAME_OFFSET(n) (XCAN_RXMSG_BASE_OFFSET + \ + XCAN_CANFD_FRAME_SIZE * (n)) + +/* the single TX mailbox used by this driver on CAN FD HW */ +#define XCAN_TX_MAILBOX_IDX 0 + /* CAN register bit masks - XCAN___MASK */ #define XCAN_SRR_CEN_MASK 0x00000002 /* CAN enable */ #define XCAN_SRR_RESET_MASK 0x00000001 /* Soft Reset the CAN core */ @@ -69,6 +88,9 @@ enum xcan_reg { #define XCAN_BTR_SJW_MASK 0x00000180 /* Synchronous jump width */ #define XCAN_BTR_TS2_MASK 0x00000070 /* Time segment 2 */ #define XCAN_BTR_TS1_MASK 0x0000000F /* Time segment 1 */ +#define XCAN_BTR_SJW_MASK_CANFD 0x000F0000 /* Synchronous jump width */ +#define XCAN_BTR_TS2_MASK_CANFD 0x00000F00 /* Time segment 2 */ +#define XCAN_BTR_TS1_MASK_CANFD 0x0000003F /* Time segment 1 */ #define XCAN_ECR_REC_MASK 0x0000FF00 /* Receive error counter */ #define XCAN_ECR_TEC_MASK 0x000000FF /* Transmit error counter */ #define XCAN_ESR_ACKER_MASK 0x00000010 /* ACK error */ @@ -82,6 +104,7 @@ enum xcan_reg { #define XCAN_SR_NORMAL_MASK 0x00000008 /* Normal mode */ #define XCAN_SR_LBACK_MASK 0x00000002 /* Loop back mode */ #define XCAN_SR_CONFIG_MASK 0x00000001 /* Configuration mode */ +#define XCAN_IXR_RXMNF_MASK 0x00020000 /* RX match not finished */ #define XCAN_IXR_TXFEMP_MASK 0x00004000 /* TX FIFO Empty */ #define XCAN_IXR_WKUP_MASK 0x00000800 /* Wake up interrupt */ #define XCAN_IXR_SLP_MASK 0x00000400 /* Sleep interrupt */ @@ -99,10 +122,15 @@ enum xcan_reg { #define XCAN_IDR_ID2_MASK 0x0007FFFE /* Extended message ident */ #define XCAN_IDR_RTR_MASK 0x00000001 /* Remote TX request */ #define XCAN_DLCR_DLC_MASK 0xF0000000 /* Data length code */ +#define XCAN_FSR_FL_MASK 0x00003F00 /* RX Fill Level */ +#define XCAN_FSR_IRI_MASK 0x00000080 /* RX Increment Read Index */ +#define XCAN_FSR_RI_MASK 0x0000001F /* RX Read Index */ /* CAN register bit shift - XCAN___SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ #define XCAN_BTR_TS2_SHIFT 4 /* Time segment 2 */ +#define XCAN_BTR_SJW_SHIFT_CANFD 16 /* Synchronous jump width */ +#define XCAN_BTR_TS2_SHIFT_CANFD 8 /* Time segment 2 */ #define XCAN_IDR_ID1_SHIFT 21 /* Standard Messg Identifier */ #define XCAN_IDR_ID2_SHIFT 1 /* Extended Message Identifier */ #define XCAN_DLCR_DLC_SHIFT 28 /* Data length code */ @@ -114,11 +142,23 @@ enum xcan_reg { /* TX-FIFO-empty interrupt available */ #define XCAN_FLAG_TXFEMP 0x0001 +/* RX Match Not Finished interrupt available */ +#define XCAN_FLAG_RXMNF 0x0002 +/* Extended acceptance filters with control at 0xE0 */ +#define XCAN_FLAG_EXT_FILTERS 0x0004 +/* TX mailboxes instead of TX FIFO */ +#define XCAN_FLAG_TX_MAILBOXES 0x0008 +/* RX FIFO with each buffer in separate registers at 0x1100 + * instead of the regular FIFO at 0x50 + */ +#define XCAN_FLAG_RX_FIFO_MULTI 0x0010 struct xcan_devtype_data { unsigned int flags; const struct can_bittiming_const *bittiming_const; const char *bus_clk_name; + unsigned int btr_ts2_shift; + unsigned int btr_sjw_shift; }; /** @@ -169,6 +209,18 @@ static const struct can_bittiming_const xcan_bittiming_const = { .brp_inc = 1, }; +static const struct can_bittiming_const xcan_bittiming_const_canfd = { + .name = DRIVER_NAME, + .tseg1_min = 1, + .tseg1_max = 64, + .tseg2_min = 1, + .tseg2_max = 16, + .sjw_max = 16, + .brp_min = 1, + .brp_max = 256, + .brp_inc = 1, +}; + /** * xcan_write_reg_le - Write a value to the device register little endian * @priv: Driver private data structure @@ -224,6 +276,23 @@ static u32 xcan_read_reg_be(const struct xcan_priv *priv, enum xcan_reg reg) } /** + * xcan_rx_int_mask - Get the mask for the receive interrupt + * @priv: Driver private data structure + * + * Return: The receive interrupt mask used by the driver on this HW + */ +static u32 xcan_rx_int_mask(const struct xcan_priv *priv) +{ + /* RXNEMP is better suited for our use case as it cannot be cleared + * while the FIFO is non-empty, but CAN FD HW does not have it + */ + if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) + return XCAN_IXR_RXOK_MASK; + else + return XCAN_IXR_RXNEMP_MASK; +} + +/** * set_reset_mode - Resets the CAN device mode * @ndev: Pointer to net_device structure * @@ -287,10 +356,10 @@ static int xcan_set_bittiming(struct net_device *ndev) btr1 = (bt->prop_seg + bt->phase_seg1 - 1); /* Setting Time Segment 2 in BTR Register */ - btr1 |= (bt->phase_seg2 - 1) << XCAN_BTR_TS2_SHIFT; + btr1 |= (bt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift; /* Setting Synchronous jump width in BTR Register */ - btr1 |= (bt->sjw - 1) << XCAN_BTR_SJW_SHIFT; + btr1 |= (bt->sjw - 1) << priv->devtype.btr_sjw_shift; priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0); priv->write_reg(priv, XCAN_BTR_OFFSET, btr1); @@ -318,6 +387,7 @@ static int xcan_chip_start(struct net_device *ndev) u32 reg_msr, reg_sr_mask; int err; unsigned long timeout; + u32 ier; /* Check if it is in reset mode */ err = set_reset_mode(ndev); @@ -329,11 +399,15 @@ static int xcan_chip_start(struct net_device *ndev) return err; /* Enable interrupts */ - priv->write_reg(priv, XCAN_IER_OFFSET, - XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK | - XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | - XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | - XCAN_IXR_RXOFLW_MASK | XCAN_IXR_ARBLST_MASK); + ier = XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK | + XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | + XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | + XCAN_IXR_ARBLST_MASK | xcan_rx_int_mask(priv); + + if (priv->devtype.flags & XCAN_FLAG_RXMNF) + ier |= XCAN_IXR_RXMNF_MASK; + + priv->write_reg(priv, XCAN_IER_OFFSET, ier); /* Check whether it is loopback mode or normal mode */ if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { @@ -344,6 +418,12 @@ static int xcan_chip_start(struct net_device *ndev) reg_sr_mask = XCAN_SR_NORMAL_MASK; } + /* enable the first extended filter, if any, as cores with extended + * filtering default to non-receipt if all filters are disabled + */ + if (priv->devtype.flags & XCAN_FLAG_EXT_FILTERS) + priv->write_reg(priv, XCAN_AFR_EXT_OFFSET, 0x00000001); + priv->write_reg(priv, XCAN_MSR_OFFSET, reg_msr); priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK); @@ -439,13 +519,15 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb, data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); priv->write_reg(priv, XCAN_FRAME_ID_OFFSET(frame_offset), id); - /* If the CAN frame is RTR frame this write triggers transmission */ + /* If the CAN frame is RTR frame this write triggers transmission + * (not on CAN FD) + */ priv->write_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_offset), dlc); if (!(cf->can_id & CAN_RTR_FLAG)) { priv->write_reg(priv, XCAN_FRAME_DW1_OFFSET(frame_offset), data[0]); /* If the CAN frame is Standard/Extended frame this - * write triggers transmission + * write triggers transmission (not on CAN FD) */ priv->write_reg(priv, XCAN_FRAME_DW2_OFFSET(frame_offset), data[1]); @@ -489,24 +571,59 @@ static int xcan_start_xmit_fifo(struct sk_buff *skb, struct net_device *ndev) } /** + * xcan_start_xmit_mailbox - Starts the transmission (mailbox mode) + * + * Return: 0 on success, -ENOSPC if there is no space + */ +static int xcan_start_xmit_mailbox(struct sk_buff *skb, struct net_device *ndev) +{ + struct xcan_priv *priv = netdev_priv(ndev); + unsigned long flags; + + if (unlikely(priv->read_reg(priv, XCAN_TRR_OFFSET) & + BIT(XCAN_TX_MAILBOX_IDX))) + return -ENOSPC; + + can_put_echo_skb(skb, ndev, 0); + + spin_lock_irqsave(&priv->tx_lock, flags); + + priv->tx_head++; + + xcan_write_frame(priv, skb, + XCAN_TXMSG_FRAME_OFFSET(XCAN_TX_MAILBOX_IDX)); + + /* Mark buffer as ready for transmit */ + priv->write_reg(priv, XCAN_TRR_OFFSET, BIT(XCAN_TX_MAILBOX_IDX)); + + netif_stop_queue(ndev); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + + return 0; +} + +/** * xcan_start_xmit - Starts the transmission * @skb: sk_buff pointer that contains data to be Txed * @ndev: Pointer to net_device structure * - * This function is invoked from upper layers to initiate transmission. This - * function uses the next available free txbuff and populates their fields to - * start the transmission. + * This function is invoked from upper layers to initiate transmission. * * Return: NETDEV_TX_OK on success and NETDEV_TX_BUSY when the tx queue is full */ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) { + struct xcan_priv *priv = netdev_priv(ndev); int ret; if (can_dropped_invalid_skb(ndev, skb)) return NETDEV_TX_OK; - ret = xcan_start_xmit_fifo(skb, ndev); + if (priv->devtype.flags & XCAN_FLAG_TX_MAILBOXES) + ret = xcan_start_xmit_mailbox(skb, ndev); + else + ret = xcan_start_xmit_fifo(skb, ndev); if (ret < 0) { netdev_err(ndev, "BUG!, TX full when queue awake!\n"); @@ -739,6 +856,17 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) } } + /* Check for RX Match Not Finished interrupt */ + if (isr & XCAN_IXR_RXMNF_MASK) { + stats->rx_dropped++; + stats->rx_errors++; + netdev_err(ndev, "RX match not finished, frame discarded\n"); + if (skb) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] |= CAN_ERR_CRTL_UNSPEC; + } + } + /* Check for error interrupt */ if (isr & XCAN_IXR_ERROR_MASK) { if (skb) @@ -823,6 +951,44 @@ static void xcan_state_interrupt(struct net_device *ndev, u32 isr) } /** + * xcan_rx_fifo_get_next_frame - Get register offset of next RX frame + * + * Return: Register offset of the next frame in RX FIFO. + */ +static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv) +{ + int offset; + + if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) { + u32 fsr; + + /* clear RXOK before the is-empty check so that any newly + * received frame will reassert it without a race + */ + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXOK_MASK); + + fsr = priv->read_reg(priv, XCAN_FSR_OFFSET); + + /* check if RX FIFO is empty */ + if (!(fsr & XCAN_FSR_FL_MASK)) + return -ENOENT; + + offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK); + + } else { + /* check if RX FIFO is empty */ + if (!(priv->read_reg(priv, XCAN_ISR_OFFSET) & + XCAN_IXR_RXNEMP_MASK)) + return -ENOENT; + + /* frames are read from a static offset */ + offset = XCAN_RXFIFO_OFFSET; + } + + return offset; +} + +/** * xcan_rx_poll - Poll routine for rx packets (NAPI) * @napi: napi structure pointer * @quota: Max number of rx packets to be processed. @@ -836,14 +1002,24 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) { struct net_device *ndev = napi->dev; struct xcan_priv *priv = netdev_priv(ndev); - u32 isr, ier; + u32 ier; int work_done = 0; - - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); - while ((isr & XCAN_IXR_RXNEMP_MASK) && (work_done < quota)) { - work_done += xcan_rx(ndev, XCAN_RXFIFO_OFFSET); - priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXNEMP_MASK); - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); + int frame_offset; + + while ((frame_offset = xcan_rx_fifo_get_next_frame(priv)) >= 0 && + (work_done < quota)) { + work_done += xcan_rx(ndev, frame_offset); + + if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) + /* increment read index */ + priv->write_reg(priv, XCAN_FSR_OFFSET, + XCAN_FSR_IRI_MASK); + else + /* clear rx-not-empty (will actually clear only if + * empty) + */ + priv->write_reg(priv, XCAN_ICR_OFFSET, + XCAN_IXR_RXNEMP_MASK); } if (work_done) { @@ -854,7 +1030,7 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) if (work_done < quota) { napi_complete_done(napi, work_done); ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier |= XCAN_IXR_RXNEMP_MASK; + ier |= xcan_rx_int_mask(priv); priv->write_reg(priv, XCAN_IER_OFFSET, ier); } return work_done; @@ -953,6 +1129,7 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) struct xcan_priv *priv = netdev_priv(ndev); u32 isr, ier; u32 isr_errors; + u32 rx_int_mask = xcan_rx_int_mask(priv); /* Get the interrupt status from Xilinx CAN */ isr = priv->read_reg(priv, XCAN_ISR_OFFSET); @@ -972,16 +1149,17 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) /* Check for the type of error interrupt and Processing it */ isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | - XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK); + XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK | + XCAN_IXR_RXMNF_MASK); if (isr_errors) { priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors); xcan_err_interrupt(ndev, isr); } /* Check for the type of receive interrupt and Processing it */ - if (isr & XCAN_IXR_RXNEMP_MASK) { + if (isr & rx_int_mask) { ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier &= ~XCAN_IXR_RXNEMP_MASK; + ier &= ~rx_int_mask; priv->write_reg(priv, XCAN_IER_OFFSET, ier); napi_schedule(&priv->napi); } @@ -1228,14 +1406,27 @@ static const struct dev_pm_ops xcan_dev_pm_ops = { }; static const struct xcan_devtype_data xcan_zynq_data = { - .flags = XCAN_FLAG_TXFEMP, .bittiming_const = &xcan_bittiming_const, + .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, + .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, .bus_clk_name = "pclk", }; static const struct xcan_devtype_data xcan_axi_data = { - .flags = 0, .bittiming_const = &xcan_bittiming_const, + .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, + .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, + .bus_clk_name = "s_axi_aclk", +}; + +static const struct xcan_devtype_data xcan_canfd_data = { + .flags = XCAN_FLAG_EXT_FILTERS | + XCAN_FLAG_RXMNF | + XCAN_FLAG_TX_MAILBOXES | + XCAN_FLAG_RX_FIFO_MULTI, + .bittiming_const = &xcan_bittiming_const, + .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD, + .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD, .bus_clk_name = "s_axi_aclk", }; @@ -1243,6 +1434,7 @@ static const struct xcan_devtype_data xcan_axi_data = { static const struct of_device_id xcan_of_match[] = { { .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data }, { .compatible = "xlnx,axi-can-1.00.a", .data = &xcan_axi_data }, + { .compatible = "xlnx,canfd-1.0", .data = &xcan_canfd_data }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, xcan_of_match); @@ -1264,7 +1456,10 @@ static int xcan_probe(struct platform_device *pdev) const struct of_device_id *of_id; const struct xcan_devtype_data *devtype = &xcan_axi_data; void __iomem *addr; - int ret, rx_max, tx_max, tx_fifo_depth; + int ret; + int rx_max, tx_max; + int hw_tx_max, hw_rx_max; + const char *hw_tx_max_property; /* Get the virtual base address for the device */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1274,21 +1469,33 @@ static int xcan_probe(struct platform_device *pdev) goto err; } - ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", - &tx_fifo_depth); - if (ret < 0) - goto err; - - ret = of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth", &rx_max); - if (ret < 0) - goto err; - of_id = of_match_device(xcan_of_match, &pdev->dev); if (of_id && of_id->data) devtype = of_id->data; - /* There is no way to directly figure out how many frames have been - * sent when the TXOK interrupt is processed. If watermark programming + hw_tx_max_property = devtype->flags & XCAN_FLAG_TX_MAILBOXES ? + "tx-mailbox-count" : "tx-fifo-depth"; + + ret = of_property_read_u32(pdev->dev.of_node, hw_tx_max_property, + &hw_tx_max); + if (ret < 0) { + dev_err(&pdev->dev, "missing %s property\n", + hw_tx_max_property); + goto err; + } + + ret = of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth", + &hw_rx_max); + if (ret < 0) { + dev_err(&pdev->dev, + "missing rx-fifo-depth property (mailbox mode is not supported)\n"); + goto err; + } + + /* With TX FIFO: + * + * There is no way to directly figure out how many frames have been + * sent when the TXOK interrupt is processed. If TXFEMP * is supported, we can have 2 frames in the FIFO and use TXFEMP * to determine if 1 or 2 frames have been sent. * Theoretically we should be able to use TXFWMEMP to determine up @@ -1297,12 +1504,20 @@ static int xcan_probe(struct platform_device *pdev) * than 2 frames in FIFO) is set anyway with no TXOK (a frame was * sent), which is not a sensible state - possibly TXFWMEMP is not * completely synchronized with the rest of the bits? + * + * With TX mailboxes: + * + * HW sends frames in CAN ID priority order. To preserve FIFO ordering + * we submit frames one at a time. */ - if (devtype->flags & XCAN_FLAG_TXFEMP) - tx_max = min(tx_fifo_depth, 2); + if (!(devtype->flags & XCAN_FLAG_TX_MAILBOXES) && + (devtype->flags & XCAN_FLAG_TXFEMP)) + tx_max = min(hw_tx_max, 2); else tx_max = 1; + rx_max = hw_rx_max; + /* Create a CAN device instance */ ndev = alloc_candev(sizeof(struct xcan_priv), tx_max); if (!ndev) @@ -1373,9 +1588,9 @@ static int xcan_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth: actual %d, using %d\n", - priv->reg_base, ndev->irq, priv->can.clock.freq, - tx_fifo_depth, priv->tx_max); + netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx buffers: actual %d, using %d\n", + priv->reg_base, ndev->irq, priv->can.clock.freq, + hw_tx_max, priv->tx_max); return 0; -- 2.7.4