From 9d9baacb90492e1a6dc4f88732f6641163aa9c12 Mon Sep 17 00:00:00 2001
From: Patrick Bruenn
Date: Tue, 16 Jan 2018 07:59:03 +0100
Subject: [PATCH] arm: imx: m53evk: remove usage of mx53_dram_size
Static variables are not available during board_init_f().
'static uint32_t mx53_dram_size[2];' was used in board specific
dram_init(), dram_init_banksize() and get_effective_memsize() to avoid
multiple calls to get_ram_size().
Reused dram initialization functions from arch/arm/mach-imx/mx5/mx53_dram.c
Signed-off-by: Patrick Bruenn
---
arch/arm/mach-imx/mx5/Makefile | 1 +
board/aries/m53evk/m53evk.c | 39 ---------------------------------------
2 files changed, 1 insertion(+), 39 deletions(-)
diff --git a/arch/arm/mach-imx/mx5/Makefile b/arch/arm/mach-imx/mx5/Makefile
index 368cfde..2cc2cbc 100644
--- a/arch/arm/mach-imx/mx5/Makefile
+++ b/arch/arm/mach-imx/mx5/Makefile
@@ -11,4 +11,5 @@ obj-y := soc.o clock.o
obj-y += lowlevel_init.o
# common files for mx53 dram initialization
+obj-$(CONFIG_TARGET_M53EVK) += mx53_dram.o
obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
diff --git a/board/aries/m53evk/m53evk.c b/board/aries/m53evk/m53evk.c
index ece8957..a798d83 100644
--- a/board/aries/m53evk/m53evk.c
+++ b/board/aries/m53evk/m53evk.c
@@ -31,45 +31,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static uint32_t mx53_dram_size[2];
-
-phys_size_t get_effective_memsize(void)
-{
- /*
- * WARNING: We must override get_effective_memsize() function here
- * to report only the size of the first DRAM bank. This is to make
- * U-Boot relocator place U-Boot into valid memory, that is, at the
- * end of the first DRAM bank. If we did not override this function
- * like so, U-Boot would be placed at the address of the first DRAM
- * bank + total DRAM size - sizeof(uboot), which in the setup where
- * each DRAM bank contains 512MiB of DRAM would result in placing
- * U-Boot into invalid memory area close to the end of the first
- * DRAM bank.
- */
- return mx53_dram_size[0];
-}
-
-int dram_init(void)
-{
- mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
- mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
- gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = mx53_dram_size[0];
-
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = mx53_dram_size[1];
-
- return 0;
-}
-
static void setup_iomux_uart(void)
{
static const iomux_v3_cfg_t uart_pads[] = {
--
2.7.4