From 9af7155bb03675ba2d4d68428a4345e0511ce8dd Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 23 Feb 2011 10:03:17 +0900 Subject: [PATCH] pch_uart: fix auto flow control miss-setting issue Currently, auto-flow control setting processing is not set correctly. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 1898861..0c95051 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -218,6 +218,7 @@ struct eg20t_port { struct pch_uart_buffer rxbuf; unsigned int dmsr; unsigned int fcr; + unsigned int mcr; unsigned int use_dma; unsigned int use_dma_flag; struct dma_async_tx_descriptor *desc_tx; @@ -1007,7 +1008,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port) static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { u32 mcr = 0; - unsigned int dat; struct eg20t_port *priv = container_of(port, struct eg20t_port, port); if (mctrl & TIOCM_DTR) @@ -1017,11 +1017,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); } static void pch_uart_stop_tx(struct uart_port *port) @@ -1215,6 +1215,13 @@ static void pch_uart_set_termios(struct uart_port *port, } else { parity = PCH_UART_HAL_PARITY_NONE; } + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); -- 2.7.4