From 9ad98319e95263469d8ca2cb543c37c5a2f40980 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 28 Aug 2020 14:14:12 +0200 Subject: [PATCH] ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM On the production revision of the SoM, 587-200, the PHY reset GPIO and touchscreen IRQs are swapped to prevent collision between EXTi IRQs, reflect that in DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 60e3d66..b4b52cf 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -117,7 +117,7 @@ max-speed = <100>; phy-handle = <&phy0>; st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; mdio0 { #address-cells = <1>; @@ -285,7 +285,7 @@ compatible = "ti,tsc2004"; reg = <0x49>; vio-supply = <&v3v3>; - interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>; }; eeprom@50 { -- 2.7.4