From 9a8da6082ddb4689baf34dcdf2a53985e25753f3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 11 Mar 2020 09:31:31 +0100 Subject: [PATCH] tty: serial: ifx6x60: Convert to GPIO descriptors This driver for the Intel MID never seems to have been properly integrated upstream: the platform data in is not used anywhere in the kernel and haven't been since it was merged into the kernel in 2010. There might be out-of-tree users, so I don't want to delete the driver, but I will refactor it to use GPIO descriptors, which means that out-of-tree users will need to adapt. There are several examples in the kernel of how to provide the resources necessary for using GPIO descriptors to pass in the GPIO lines, for the MID platform in particular, it will suffice to inspect the code in files like: arch/x86/platform/intel-mid/device_libs/platform_bt.c This refactoring transfers all GPIOs in the driver, including a hard-coded "PMU reset" in the driver to use GPIO descriptors instead. The following named GPIO descriptors need to be supplied: - reset - power - mrdy - srdy - rst_out - pmu_reset Cc: Russ Gorby Signed-off-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200311083131.693908-2-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 170 ++++++++++++++---------------------------- drivers/tty/serial/ifx6x60.h | 13 ++-- include/linux/spi/ifx_modem.h | 5 -- 3 files changed, 65 insertions(+), 123 deletions(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 32a0cce..7d16fe4 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include #include #include #include @@ -61,7 +61,6 @@ #define IFX_SPI_HEADER_F (-2) #define PO_POST_DELAY 200 -#define IFX_MDM_RST_PMU 4 /* forward reference */ static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); @@ -81,7 +80,7 @@ static struct notifier_block ifx_modem_reboot_notifier_block = { static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev) { - gpio_set_value(IFX_MDM_RST_PMU, 1); + gpiod_set_value(ifx_dev->gpio.pmu_reset, 1); msleep(PO_POST_DELAY); return 0; @@ -107,7 +106,7 @@ static int ifx_modem_reboot_callback(struct notifier_block *nfb, */ static inline void mrdy_set_high(struct ifx_spi_device *ifx) { - gpio_set_value(ifx->gpio.mrdy, 1); + gpiod_set_value(ifx->gpio.mrdy, 1); } /** @@ -117,7 +116,7 @@ static inline void mrdy_set_high(struct ifx_spi_device *ifx) */ static inline void mrdy_set_low(struct ifx_spi_device *ifx) { - gpio_set_value(ifx->gpio.mrdy, 0); + gpiod_set_value(ifx->gpio.mrdy, 0); } /** @@ -244,7 +243,7 @@ static inline void swap_buf_32(unsigned char *buf, int len, void *end) */ static void mrdy_assert(struct ifx_spi_device *ifx_dev) { - int val = gpio_get_value(ifx_dev->gpio.srdy); + int val = gpiod_get_value(ifx_dev->gpio.srdy); if (!val) { if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { @@ -691,7 +690,7 @@ complete_exit: clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); queue_length = kfifo_len(&ifx_dev->tx_fifo); - srdy = gpio_get_value(ifx_dev->gpio.srdy); + srdy = gpiod_get_value(ifx_dev->gpio.srdy); if (!srdy) ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); @@ -898,7 +897,7 @@ static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) { struct ifx_spi_device *ifx_dev = dev; - int val = gpio_get_value(ifx_dev->gpio.reset_out); + int val = gpiod_get_value(ifx_dev->gpio.reset_out); int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); if (val == 0) { @@ -954,14 +953,14 @@ static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) * to reset properly */ set_bit(MR_START, &ifx_dev->mdm_reset_state); - gpio_set_value(ifx_dev->gpio.po, 0); - gpio_set_value(ifx_dev->gpio.reset, 0); + gpiod_set_value(ifx_dev->gpio.po, 0); + gpiod_set_value(ifx_dev->gpio.reset, 0); msleep(25); - gpio_set_value(ifx_dev->gpio.reset, 1); + gpiod_set_value(ifx_dev->gpio.reset, 1); msleep(1); - gpio_set_value(ifx_dev->gpio.po, 1); + gpiod_set_value(ifx_dev->gpio.po, 1); msleep(1); - gpio_set_value(ifx_dev->gpio.po, 0); + gpiod_set_value(ifx_dev->gpio.po, 0); ret = wait_event_timeout(ifx_dev->mdm_reset_wait, test_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state), @@ -1080,107 +1079,68 @@ static int ifx_spi_spi_probe(struct spi_device *spi) goto error_ret; } - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - - dev_info(dev, "gpios %d, %d, %d, %d, %d", - ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, - ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); - - /* Configure gpios */ - ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); - if (ret < 0) { - dev_err(dev, "Unable to allocate GPIO%d (RESET)", - ifx_dev->gpio.reset); + ifx_dev->gpio.reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.reset)) { + dev_err(dev, "could not obtain reset GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.reset); goto error_ret; } - ret += gpio_direction_output(ifx_dev->gpio.reset, 0); - ret += gpio_export(ifx_dev->gpio.reset, 1); - if (ret) { - dev_err(dev, "Unable to configure GPIO%d (RESET)", - ifx_dev->gpio.reset); - ret = -EBUSY; - goto error_ret2; - } - - ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); - ret += gpio_direction_output(ifx_dev->gpio.po, 0); - ret += gpio_export(ifx_dev->gpio.po, 1); - if (ret) { - dev_err(dev, "Unable to configure GPIO%d (ON)", - ifx_dev->gpio.po); - ret = -EBUSY; - goto error_ret3; - } - - ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); - if (ret < 0) { - dev_err(dev, "Unable to allocate GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - goto error_ret3; - } - ret += gpio_export(ifx_dev->gpio.mrdy, 1); - ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); - if (ret) { - dev_err(dev, "Unable to configure GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - ret = -EBUSY; - goto error_ret4; + gpiod_set_consumer_name(ifx_dev->gpio.reset, "ifxModem reset"); + ifx_dev->gpio.po = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.po)) { + dev_err(dev, "could not obtain power GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.po); + goto error_ret; } - - ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); - if (ret < 0) { - dev_err(dev, "Unable to allocate GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret4; + gpiod_set_consumer_name(ifx_dev->gpio.po, "ifxModem power"); + ifx_dev->gpio.mrdy = devm_gpiod_get(dev, "mrdy", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.mrdy)) { + dev_err(dev, "could not obtain mrdy GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.mrdy); + goto error_ret; } - ret += gpio_export(ifx_dev->gpio.srdy, 1); - ret += gpio_direction_input(ifx_dev->gpio.srdy); - if (ret) { - dev_err(dev, "Unable to configure GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret5; + gpiod_set_consumer_name(ifx_dev->gpio.mrdy, "ifxModem mrdy"); + ifx_dev->gpio.srdy = devm_gpiod_get(dev, "srdy", GPIOD_IN); + if (IS_ERR(ifx_dev->gpio.srdy)) { + dev_err(dev, "could not obtain srdy GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.srdy); + goto error_ret; } - - ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); - if (ret < 0) { - dev_err(dev, "Unable to allocate GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - goto error_ret5; + gpiod_set_consumer_name(ifx_dev->gpio.srdy, "ifxModem srdy"); + ifx_dev->gpio.reset_out = devm_gpiod_get(dev, "rst_out", GPIOD_IN); + if (IS_ERR(ifx_dev->gpio.reset_out)) { + dev_err(dev, "could not obtain rst_out GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.reset_out); + goto error_ret; } - ret += gpio_export(ifx_dev->gpio.reset_out, 1); - ret += gpio_direction_input(ifx_dev->gpio.reset_out); - if (ret) { - dev_err(dev, "Unable to configure GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - ret = -EBUSY; - goto error_ret6; + gpiod_set_consumer_name(ifx_dev->gpio.reset_out, "ifxModem reset out"); + ifx_dev->gpio.pmu_reset = devm_gpiod_get(dev, "pmu_reset", GPIOD_ASIS); + if (IS_ERR(ifx_dev->gpio.pmu_reset)) { + dev_err(dev, "could not obtain pmu_reset GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.pmu_reset); + goto error_ret; } + gpiod_set_consumer_name(ifx_dev->gpio.pmu_reset, "ifxModem PMU reset"); - ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), + ret = request_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_spi_reset_interrupt, IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, ifx_dev); if (ret) { dev_err(dev, "Unable to get irq %x\n", - gpio_to_irq(ifx_dev->gpio.reset_out)); - goto error_ret6; + gpiod_to_irq(ifx_dev->gpio.reset_out)); + goto error_ret; } ret = ifx_spi_reset(ifx_dev); - ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), + ret = request_irq(gpiod_to_irq(ifx_dev->gpio.srdy), ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME, ifx_dev); if (ret) { dev_err(dev, "Unable to get irq %x", - gpio_to_irq(ifx_dev->gpio.srdy)); - goto error_ret7; + gpiod_to_irq(ifx_dev->gpio.srdy)); + goto error_ret2; } /* set pm runtime power state and register with power system */ @@ -1191,7 +1151,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) /* no outgoing tty open at this point, this just satisfies the * modem's read and should reset communication properly */ - srdy = gpio_get_value(ifx_dev->gpio.srdy); + srdy = gpiod_get_value(ifx_dev->gpio.srdy); if (srdy) { mrdy_assert(ifx_dev); @@ -1200,18 +1160,8 @@ static int ifx_spi_spi_probe(struct spi_device *spi) mrdy_set_low(ifx_dev); return 0; -error_ret7: - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); -error_ret6: - gpio_free(ifx_dev->gpio.srdy); -error_ret5: - gpio_free(ifx_dev->gpio.mrdy); -error_ret4: - gpio_free(ifx_dev->gpio.reset); -error_ret3: - gpio_free(ifx_dev->gpio.po); error_ret2: - gpio_free(ifx_dev->gpio.reset_out); + free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); error_ret: ifx_spi_free_device(ifx_dev); saved_ifx_dev = NULL; @@ -1235,14 +1185,8 @@ static int ifx_spi_spi_remove(struct spi_device *spi) pm_runtime_disable(&spi->dev); /* free irq */ - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); - free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev); - - gpio_free(ifx_dev->gpio.srdy); - gpio_free(ifx_dev->gpio.mrdy); - gpio_free(ifx_dev->gpio.reset); - gpio_free(ifx_dev->gpio.po); - gpio_free(ifx_dev->gpio.reset_out); + free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); + free_irq(gpiod_to_irq(ifx_dev->gpio.srdy), ifx_dev); /* free allocations */ ifx_spi_free_device(ifx_dev); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index cacca5b..ecb841d9 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -10,6 +10,8 @@ #ifndef _IFX6X60_H #define _IFX6X60_H +struct gpio_desc; + #define DRVNAME "ifx6x60" #define TTYNAME "ttyIFX" @@ -94,11 +96,12 @@ struct ifx_spi_device { struct { /* gpio lines */ - unsigned short srdy; /* slave-ready gpio */ - unsigned short mrdy; /* master-ready gpio */ - unsigned short reset; /* modem-reset gpio */ - unsigned short po; /* modem-on gpio */ - unsigned short reset_out; /* modem-in-reset gpio */ + struct gpio_desc *srdy; /* slave-ready gpio */ + struct gpio_desc *mrdy; /* master-ready gpio */ + struct gpio_desc *reset; /* modem-reset gpio */ + struct gpio_desc *po; /* modem-on gpio */ + struct gpio_desc *reset_out; /* modem-in-reset gpio */ + struct gpio_desc *pmu_reset; /* PMU reset gpio */ /* state/stats */ int unack_srdy_int_nb; } gpio; diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h index 694268c..6d19b09 100644 --- a/include/linux/spi/ifx_modem.h +++ b/include/linux/spi/ifx_modem.h @@ -3,12 +3,7 @@ #define LINUX_IFX_MODEM_H struct ifx_modem_platform_data { - unsigned short rst_out; /* modem reset out */ - unsigned short pwr_on; /* power on */ - unsigned short rst_pmu; /* reset modem */ unsigned short tx_pwr; /* modem power threshold */ - unsigned short srdy; /* SRDY */ - unsigned short mrdy; /* MRDY */ unsigned char modem_type; /* Modem type */ unsigned long max_hz; /* max SPI frequency */ unsigned short use_dma:1; /* spi protocol driver supplies -- 2.7.4