From 98a175b60f46a80dfa44fb0e0807f2e5a351f35f Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Sat, 9 Jun 2012 16:40:38 +0530 Subject: [PATCH] regulator: core: Add regulator_set_voltage_time_sel to calculate ramp delay. This patch adds regulator_set_voltage_time_sel(), to move into core, the commonly used code by drivers to provide the .set_voltage_time_sel callback. It will also allow us to configure different ramp delay for different regulators easily. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- drivers/regulator/core.c | 24 ++++++++++++++++++++++++ include/linux/regulator/driver.h | 5 +++++ 2 files changed, 29 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c6aeda..ff76abd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2280,6 +2280,30 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** + *regulator_set_voltage_time_sel - get raise/fall time + * @regulator: regulator source + * @old_selector: selector for starting voltage + * @new_selector: selector for target voltage + * + * Provided with the starting and target voltage selectors, this function + * returns time in microseconds required to rise or fall to this new voltage + * + * Drivers providing uV_step in their regulator_desc and ramp_delay in + * regulation_constraints can use this as their set_voltage_time_sel() + * operation. + */ +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + if (rdev->desc->ramp_delay && rdev->desc->uV_step) + return DIV_ROUND_UP(rdev->desc->uV_step * + abs(new_selector - old_selector), + rdev->desc->ramp_delay) * 1000; + return 0; +} + +/** * regulator_sync_voltage - re-apply last regulator output voltage * @regulator: regulator source * diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 8022638..ae5c253 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -170,6 +170,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ @@ -189,6 +190,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int ramp_delay; const unsigned int *volt_table; @@ -285,6 +287,9 @@ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); int regulator_is_enabled_regmap(struct regulator_dev *rdev); int regulator_enable_regmap(struct regulator_dev *rdev); int regulator_disable_regmap(struct regulator_dev *rdev); +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); -- 2.7.4