From 9863aba5d6a8ceeab890e8593268fbe39c8d9562 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Sun, 28 Sep 2014 16:40:36 +0800 Subject: [PATCH] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board Add enet2 support for imx6sx-sdb board, and add the "fsl,imx6q-fec" compatible for fec2 node to be compatible with the old version. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dts | 62 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sx.dtsi | 2 +- 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 82d6b34..448489b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -105,6 +105,30 @@ gpio = <&gpio3 27 0>; enable-active-high; }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; }; sound { @@ -133,6 +157,14 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii"; status = "okay"; }; @@ -394,6 +426,30 @@ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 >; }; @@ -452,6 +508,12 @@ >; }; + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + pinctrl_pwm3: pwm3grp-1 { fsl,pins = < MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f3e88c0..422fc5a 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -877,7 +877,7 @@ }; fec2: ethernet@021b4000 { - compatible = "fsl,imx6sx-fec"; + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; interrupts = , ; -- 2.7.4