From 9850b6c693567aaa9745b92dadac4eb1128c3079 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 14 Jan 2021 17:05:24 +0530 Subject: [PATCH] arch: powerpc: Remove oprofile The previous commit already disabled building oprofile, lets remove the oprofile directory now. Suggested-by: Christoph Hellwig Suggested-by: Linus Torvalds Signed-off-by: Viresh Kumar Acked-by: Robert Richter Acked-by: William Cohen Acked-by: Al Viro Acked-by: Thomas Gleixner --- arch/powerpc/oprofile/Makefile | 19 - arch/powerpc/oprofile/backtrace.c | 120 -- arch/powerpc/oprofile/cell/pr_util.h | 110 -- arch/powerpc/oprofile/cell/spu_profiler.c | 248 ---- arch/powerpc/oprofile/cell/spu_task_sync.c | 657 ----------- arch/powerpc/oprofile/cell/vma_map.c | 279 ----- arch/powerpc/oprofile/common.c | 243 ---- arch/powerpc/oprofile/op_model_7450.c | 207 ---- arch/powerpc/oprofile/op_model_cell.c | 1709 ---------------------------- arch/powerpc/oprofile/op_model_fsl_emb.c | 380 ------- arch/powerpc/oprofile/op_model_pa6t.c | 227 ---- arch/powerpc/oprofile/op_model_power4.c | 438 ------- 12 files changed, 4637 deletions(-) delete mode 100644 arch/powerpc/oprofile/Makefile delete mode 100644 arch/powerpc/oprofile/backtrace.c delete mode 100644 arch/powerpc/oprofile/cell/pr_util.h delete mode 100644 arch/powerpc/oprofile/cell/spu_profiler.c delete mode 100644 arch/powerpc/oprofile/cell/spu_task_sync.c delete mode 100644 arch/powerpc/oprofile/cell/vma_map.c delete mode 100644 arch/powerpc/oprofile/common.c delete mode 100644 arch/powerpc/oprofile/op_model_7450.c delete mode 100644 arch/powerpc/oprofile/op_model_cell.c delete mode 100644 arch/powerpc/oprofile/op_model_fsl_emb.c delete mode 100644 arch/powerpc/oprofile/op_model_pa6t.c delete mode 100644 arch/powerpc/oprofile/op_model_power4.c diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile deleted file mode 100644 index bb2d94c..0000000 --- a/arch/powerpc/oprofile/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) - -obj-$(CONFIG_OPROFILE) += oprofile.o - -DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ - oprof.o cpu_buffer.o buffer_sync.o \ - event_buffer.o oprofile_files.o \ - oprofilefs.o oprofile_stats.o \ - timer_int.o ) - -oprofile-y := $(DRIVER_OBJS) common.o backtrace.o -oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \ - cell/spu_profiler.o cell/vma_map.o \ - cell/spu_task_sync.o -oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o -oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o -oprofile-$(CONFIG_PPC_BOOK3S_32) += op_model_7450.o diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c deleted file mode 100644 index 9db7ada..0000000 --- a/arch/powerpc/oprofile/backtrace.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/** - * Copyright (C) 2005 Brian Rogan , IBM - * -**/ - -#include -#include -#include -#include -#include -#include -#include - -#define STACK_SP(STACK) *(STACK) - -#define STACK_LR64(STACK) *((unsigned long *)(STACK) + 2) -#define STACK_LR32(STACK) *((unsigned int *)(STACK) + 1) - -#ifdef CONFIG_PPC64 -#define STACK_LR(STACK) STACK_LR64(STACK) -#else -#define STACK_LR(STACK) STACK_LR32(STACK) -#endif - -static unsigned int user_getsp32(unsigned int sp, int is_first) -{ - unsigned int stack_frame[2]; - void __user *p = compat_ptr(sp); - - /* - * The most likely reason for this is that we returned -EFAULT, - * which means that we've done all that we can do from - * interrupt context. - */ - if (copy_from_user_nofault(stack_frame, (void __user *)p, - sizeof(stack_frame))) - return 0; - - if (!is_first) - oprofile_add_trace(STACK_LR32(stack_frame)); - - /* - * We do not enforce increasing stack addresses here because - * we may transition to a different stack, eg a signal handler. - */ - return STACK_SP(stack_frame); -} - -#ifdef CONFIG_PPC64 -static unsigned long user_getsp64(unsigned long sp, int is_first) -{ - unsigned long stack_frame[3]; - - if (copy_from_user_nofault(stack_frame, (void __user *)sp, - sizeof(stack_frame))) - return 0; - - if (!is_first) - oprofile_add_trace(STACK_LR64(stack_frame)); - - return STACK_SP(stack_frame); -} -#endif - -static unsigned long kernel_getsp(unsigned long sp, int is_first) -{ - unsigned long *stack_frame = (unsigned long *)sp; - - if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) - return 0; - - if (!is_first) - oprofile_add_trace(STACK_LR(stack_frame)); - - /* - * We do not enforce increasing stack addresses here because - * we might be transitioning from an interrupt stack to a kernel - * stack. validate_sp() is designed to understand this, so just - * use it. - */ - return STACK_SP(stack_frame); -} - -void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth) -{ - unsigned long sp = regs->gpr[1]; - int first_frame = 1; - - /* We ditch the top stackframe so need to loop through an extra time */ - depth += 1; - - if (!user_mode(regs)) { - while (depth--) { - sp = kernel_getsp(sp, first_frame); - if (!sp) - break; - first_frame = 0; - } - } else { -#ifdef CONFIG_PPC64 - if (!is_32bit_task()) { - while (depth--) { - sp = user_getsp64(sp, first_frame); - if (!sp) - break; - first_frame = 0; - } - return; - } -#endif - - while (depth--) { - sp = user_getsp32(sp, first_frame); - if (!sp) - break; - first_frame = 0; - } - } -} diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h deleted file mode 100644 index e198efa..0000000 --- a/arch/powerpc/oprofile/cell/pr_util.h +++ /dev/null @@ -1,110 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - /* - * Cell Broadband Engine OProfile Support - * - * (C) Copyright IBM Corporation 2006 - * - * Author: Maynard Johnson - */ - -#ifndef PR_UTIL_H -#define PR_UTIL_H - -#include -#include -#include -#include -#include - -/* Defines used for sync_start */ -#define SKIP_GENERIC_SYNC 0 -#define SYNC_START_ERROR -1 -#define DO_GENERIC_SYNC 1 -#define SPUS_PER_NODE 8 -#define DEFAULT_TIMER_EXPIRE (HZ / 10) - -extern struct delayed_work spu_work; -extern int spu_prof_running; - -#define TRACE_ARRAY_SIZE 1024 - -extern spinlock_t oprof_spu_smpl_arry_lck; - -struct spu_overlay_info { /* map of sections within an SPU overlay */ - unsigned int vma; /* SPU virtual memory address from elf */ - unsigned int size; /* size of section from elf */ - unsigned int offset; /* offset of section into elf file */ - unsigned int buf; -}; - -struct vma_to_fileoffset_map { /* map of sections within an SPU program */ - struct vma_to_fileoffset_map *next; /* list pointer */ - unsigned int vma; /* SPU virtual memory address from elf */ - unsigned int size; /* size of section from elf */ - unsigned int offset; /* offset of section into elf file */ - unsigned int guard_ptr; - unsigned int guard_val; - /* - * The guard pointer is an entry in the _ovly_buf_table, - * computed using ovly.buf as the index into the table. Since - * ovly.buf values begin at '1' to reference the first (or 0th) - * entry in the _ovly_buf_table, the computation subtracts 1 - * from ovly.buf. - * The guard value is stored in the _ovly_buf_table entry and - * is an index (starting at 1) back to the _ovly_table entry - * that is pointing at this _ovly_buf_table entry. So, for - * example, for an overlay scenario with one overlay segment - * and two overlay sections: - * - Section 1 points to the first entry of the - * _ovly_buf_table, which contains a guard value - * of '1', referencing the first (index=0) entry of - * _ovly_table. - * - Section 2 points to the second entry of the - * _ovly_buf_table, which contains a guard value - * of '2', referencing the second (index=1) entry of - * _ovly_table. - */ - -}; - -struct spu_buffer { - int last_guard_val; - int ctx_sw_seen; - unsigned long *buff; - unsigned int head, tail; -}; - - -/* The three functions below are for maintaining and accessing - * the vma-to-fileoffset map. - */ -struct vma_to_fileoffset_map *create_vma_map(const struct spu *spu, - unsigned long objectid); -unsigned int vma_map_lookup(struct vma_to_fileoffset_map *map, - unsigned int vma, const struct spu *aSpu, - int *grd_val); -void vma_map_free(struct vma_to_fileoffset_map *map); - -/* - * Entry point for SPU profiling. - * cycles_reset is the SPU_CYCLES count value specified by the user. - */ -int start_spu_profiling_cycles(unsigned int cycles_reset); -void start_spu_profiling_events(void); - -void stop_spu_profiling_cycles(void); -void stop_spu_profiling_events(void); - -/* add the necessary profiling hooks */ -int spu_sync_start(void); - -/* remove the hooks */ -int spu_sync_stop(void); - -/* Record SPU program counter samples to the oprofile event buffer. */ -void spu_sync_buffer(int spu_num, unsigned int *samples, - int num_samples); - -void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset); - -#endif /* PR_UTIL_H */ diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c deleted file mode 100644 index cdf8834..0000000 --- a/arch/powerpc/oprofile/cell/spu_profiler.c +++ /dev/null @@ -1,248 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Cell Broadband Engine OProfile Support - * - * (C) Copyright IBM Corporation 2006 - * - * Authors: Maynard Johnson - * Carl Love - */ - -#include -#include -#include -#include -#include -#include "pr_util.h" - -#define SCALE_SHIFT 14 - -static u32 *samples; - -/* spu_prof_running is a flag used to indicate if spu profiling is enabled - * or not. It is set by the routines start_spu_profiling_cycles() and - * start_spu_profiling_events(). The flag is cleared by the routines - * stop_spu_profiling_cycles() and stop_spu_profiling_events(). These - * routines are called via global_start() and global_stop() which are called in - * op_powerpc_start() and op_powerpc_stop(). These routines are called once - * per system as a result of the user starting/stopping oprofile. Hence, only - * one CPU per user at a time will be changing the value of spu_prof_running. - * In general, OProfile does not protect against multiple users trying to run - * OProfile at a time. - */ -int spu_prof_running; -static unsigned int profiling_interval; - -#define NUM_SPU_BITS_TRBUF 16 -#define SPUS_PER_TB_ENTRY 4 - -#define SPU_PC_MASK 0xFFFF - -DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck); -static unsigned long oprof_spu_smpl_arry_lck_flags; - -void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset) -{ - unsigned long ns_per_cyc; - - if (!freq_khz) - freq_khz = ppc_proc_freq/1000; - - /* To calculate a timeout in nanoseconds, the basic - * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency). - * To avoid floating point math, we use the scale math - * technique as described in linux/jiffies.h. We use - * a scale factor of SCALE_SHIFT, which provides 4 decimal places - * of precision. This is close enough for the purpose at hand. - * - * The value of the timeout should be small enough that the hw - * trace buffer will not get more than about 1/3 full for the - * maximum user specified (the LFSR value) hw sampling frequency. - * This is to ensure the trace buffer will never fill even if the - * kernel thread scheduling varies under a heavy system load. - */ - - ns_per_cyc = (USEC_PER_SEC << SCALE_SHIFT)/freq_khz; - profiling_interval = (ns_per_cyc * cycles_reset) >> SCALE_SHIFT; - -} - -/* - * Extract SPU PC from trace buffer entry - */ -static void spu_pc_extract(int cpu, int entry) -{ - /* the trace buffer is 128 bits */ - u64 trace_buffer[2]; - u64 spu_mask; - int spu; - - spu_mask = SPU_PC_MASK; - - /* Each SPU PC is 16 bits; hence, four spus in each of - * the two 64-bit buffer entries that make up the - * 128-bit trace_buffer entry. Process two 64-bit values - * simultaneously. - * trace[0] SPU PC contents are: 0 1 2 3 - * trace[1] SPU PC contents are: 4 5 6 7 - */ - - cbe_read_trace_buffer(cpu, trace_buffer); - - for (spu = SPUS_PER_TB_ENTRY-1; spu >= 0; spu--) { - /* spu PC trace entry is upper 16 bits of the - * 18 bit SPU program counter - */ - samples[spu * TRACE_ARRAY_SIZE + entry] - = (spu_mask & trace_buffer[0]) << 2; - samples[(spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE + entry] - = (spu_mask & trace_buffer[1]) << 2; - - trace_buffer[0] = trace_buffer[0] >> NUM_SPU_BITS_TRBUF; - trace_buffer[1] = trace_buffer[1] >> NUM_SPU_BITS_TRBUF; - } -} - -static int cell_spu_pc_collection(int cpu) -{ - u32 trace_addr; - int entry; - - /* process the collected SPU PC for the node */ - - entry = 0; - - trace_addr = cbe_read_pm(cpu, trace_address); - while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) { - /* there is data in the trace buffer to process */ - spu_pc_extract(cpu, entry); - - entry++; - - if (entry >= TRACE_ARRAY_SIZE) - /* spu_samples is full */ - break; - - trace_addr = cbe_read_pm(cpu, trace_address); - } - - return entry; -} - - -static enum hrtimer_restart profile_spus(struct hrtimer *timer) -{ - ktime_t kt; - int cpu, node, k, num_samples, spu_num; - - if (!spu_prof_running) - goto stop; - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - node = cbe_cpu_to_node(cpu); - - /* There should only be one kernel thread at a time processing - * the samples. In the very unlikely case that the processing - * is taking a very long time and multiple kernel threads are - * started to process the samples. Make sure only one kernel - * thread is working on the samples array at a time. The - * sample array must be loaded and then processed for a given - * cpu. The sample array is not per cpu. - */ - spin_lock_irqsave(&oprof_spu_smpl_arry_lck, - oprof_spu_smpl_arry_lck_flags); - num_samples = cell_spu_pc_collection(cpu); - - if (num_samples == 0) { - spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck, - oprof_spu_smpl_arry_lck_flags); - continue; - } - - for (k = 0; k < SPUS_PER_NODE; k++) { - spu_num = k + (node * SPUS_PER_NODE); - spu_sync_buffer(spu_num, - samples + (k * TRACE_ARRAY_SIZE), - num_samples); - } - - spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck, - oprof_spu_smpl_arry_lck_flags); - - } - smp_wmb(); /* insure spu event buffer updates are written */ - /* don't want events intermingled... */ - - kt = profiling_interval; - if (!spu_prof_running) - goto stop; - hrtimer_forward(timer, timer->base->get_time(), kt); - return HRTIMER_RESTART; - - stop: - printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n"); - return HRTIMER_NORESTART; -} - -static struct hrtimer timer; -/* - * Entry point for SPU cycle profiling. - * NOTE: SPU profiling is done system-wide, not per-CPU. - * - * cycles_reset is the count value specified by the user when - * setting up OProfile to count SPU_CYCLES. - */ -int start_spu_profiling_cycles(unsigned int cycles_reset) -{ - ktime_t kt; - - pr_debug("timer resolution: %lu\n", TICK_NSEC); - kt = profiling_interval; - hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hrtimer_set_expires(&timer, kt); - timer.function = profile_spus; - - /* Allocate arrays for collecting SPU PC samples */ - samples = kcalloc(SPUS_PER_NODE * TRACE_ARRAY_SIZE, sizeof(u32), - GFP_KERNEL); - - if (!samples) - return -ENOMEM; - - spu_prof_running = 1; - hrtimer_start(&timer, kt, HRTIMER_MODE_REL); - schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE); - - return 0; -} - -/* - * Entry point for SPU event profiling. - * NOTE: SPU profiling is done system-wide, not per-CPU. - * - * cycles_reset is the count value specified by the user when - * setting up OProfile to count SPU_CYCLES. - */ -void start_spu_profiling_events(void) -{ - spu_prof_running = 1; - schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE); - - return; -} - -void stop_spu_profiling_cycles(void) -{ - spu_prof_running = 0; - hrtimer_cancel(&timer); - kfree(samples); - pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n"); -} - -void stop_spu_profiling_events(void) -{ - spu_prof_running = 0; -} diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c deleted file mode 100644 index 489f9931..0000000 --- a/arch/powerpc/oprofile/cell/spu_task_sync.c +++ /dev/null @@ -1,657 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Cell Broadband Engine OProfile Support - * - * (C) Copyright IBM Corporation 2006 - * - * Author: Maynard Johnson - */ - -/* The purpose of this file is to handle SPU event task switching - * and to record SPU context information into the OProfile - * event buffer. - * - * Additionally, the spu_sync_buffer function is provided as a helper - * for recoding actual SPU program counter samples to the event buffer. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pr_util.h" - -#define RELEASE_ALL 9999 - -static DEFINE_SPINLOCK(buffer_lock); -static DEFINE_SPINLOCK(cache_lock); -static int num_spu_nodes; -static int spu_prof_num_nodes; - -struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE]; -struct delayed_work spu_work; -static unsigned max_spu_buff; - -static void spu_buff_add(unsigned long int value, int spu) -{ - /* spu buff is a circular buffer. Add entries to the - * head. Head is the index to store the next value. - * The buffer is full when there is one available entry - * in the queue, i.e. head and tail can't be equal. - * That way we can tell the difference between the - * buffer being full versus empty. - * - * ASSUMPTION: the buffer_lock is held when this function - * is called to lock the buffer, head and tail. - */ - int full = 1; - - if (spu_buff[spu].head >= spu_buff[spu].tail) { - if ((spu_buff[spu].head - spu_buff[spu].tail) - < (max_spu_buff - 1)) - full = 0; - - } else if (spu_buff[spu].tail > spu_buff[spu].head) { - if ((spu_buff[spu].tail - spu_buff[spu].head) - > 1) - full = 0; - } - - if (!full) { - spu_buff[spu].buff[spu_buff[spu].head] = value; - spu_buff[spu].head++; - - if (spu_buff[spu].head >= max_spu_buff) - spu_buff[spu].head = 0; - } else { - /* From the user's perspective make the SPU buffer - * size management/overflow look like we are using - * per cpu buffers. The user uses the same - * per cpu parameter to adjust the SPU buffer size. - * Increment the sample_lost_overflow to inform - * the user the buffer size needs to be increased. - */ - oprofile_cpu_buffer_inc_smpl_lost(); - } -} - -/* This function copies the per SPU buffers to the - * OProfile kernel buffer. - */ -static void sync_spu_buff(void) -{ - int spu; - unsigned long flags; - int curr_head; - - for (spu = 0; spu < num_spu_nodes; spu++) { - /* In case there was an issue and the buffer didn't - * get created skip it. - */ - if (spu_buff[spu].buff == NULL) - continue; - - /* Hold the lock to make sure the head/tail - * doesn't change while spu_buff_add() is - * deciding if the buffer is full or not. - * Being a little paranoid. - */ - spin_lock_irqsave(&buffer_lock, flags); - curr_head = spu_buff[spu].head; - spin_unlock_irqrestore(&buffer_lock, flags); - - /* Transfer the current contents to the kernel buffer. - * data can still be added to the head of the buffer. - */ - oprofile_put_buff(spu_buff[spu].buff, - spu_buff[spu].tail, - curr_head, max_spu_buff); - - spin_lock_irqsave(&buffer_lock, flags); - spu_buff[spu].tail = curr_head; - spin_unlock_irqrestore(&buffer_lock, flags); - } - -} - -static void wq_sync_spu_buff(struct work_struct *work) -{ - /* move data from spu buffers to kernel buffer */ - sync_spu_buff(); - - /* only reschedule if profiling is not done */ - if (spu_prof_running) - schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE); -} - -/* Container for caching information about an active SPU task. */ -struct cached_info { - struct vma_to_fileoffset_map *map; - struct spu *the_spu; /* needed to access pointer to local_store */ - struct kref cache_ref; -}; - -static struct cached_info *spu_info[MAX_NUMNODES * 8]; - -static void destroy_cached_info(struct kref *kref) -{ - struct cached_info *info; - - info = container_of(kref, struct cached_info, cache_ref); - vma_map_free(info->map); - kfree(info); - module_put(THIS_MODULE); -} - -/* Return the cached_info for the passed SPU number. - * ATTENTION: Callers are responsible for obtaining the - * cache_lock if needed prior to invoking this function. - */ -static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num) -{ - struct kref *ref; - struct cached_info *ret_info; - - if (spu_num >= num_spu_nodes) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Invalid index %d into spu info cache\n", - __func__, __LINE__, spu_num); - ret_info = NULL; - goto out; - } - if (!spu_info[spu_num] && the_spu) { - ref = spu_get_profile_private_kref(the_spu->ctx); - if (ref) { - spu_info[spu_num] = container_of(ref, struct cached_info, cache_ref); - kref_get(&spu_info[spu_num]->cache_ref); - } - } - - ret_info = spu_info[spu_num]; - out: - return ret_info; -} - - -/* Looks for cached info for the passed spu. If not found, the - * cached info is created for the passed spu. - * Returns 0 for success; otherwise, -1 for error. - */ -static int -prepare_cached_spu_info(struct spu *spu, unsigned long objectId) -{ - unsigned long flags; - struct vma_to_fileoffset_map *new_map; - int retval = 0; - struct cached_info *info; - - /* We won't bother getting cache_lock here since - * don't do anything with the cached_info that's returned. - */ - info = get_cached_info(spu, spu->number); - - if (info) { - pr_debug("Found cached SPU info.\n"); - goto out; - } - - /* Create cached_info and set spu_info[spu->number] to point to it. - * spu->number is a system-wide value, not a per-node value. - */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: create vma_map failed\n", - __func__, __LINE__); - retval = -ENOMEM; - goto err_alloc; - } - new_map = create_vma_map(spu, objectId); - if (!new_map) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: create vma_map failed\n", - __func__, __LINE__); - retval = -ENOMEM; - goto err_alloc; - } - - pr_debug("Created vma_map\n"); - info->map = new_map; - info->the_spu = spu; - kref_init(&info->cache_ref); - spin_lock_irqsave(&cache_lock, flags); - spu_info[spu->number] = info; - /* Increment count before passing off ref to SPUFS. */ - kref_get(&info->cache_ref); - - /* We increment the module refcount here since SPUFS is - * responsible for the final destruction of the cached_info, - * and it must be able to access the destroy_cached_info() - * function defined in the OProfile module. We decrement - * the module refcount in destroy_cached_info. - */ - try_module_get(THIS_MODULE); - spu_set_profile_private_kref(spu->ctx, &info->cache_ref, - destroy_cached_info); - spin_unlock_irqrestore(&cache_lock, flags); - goto out; - -err_alloc: - kfree(info); -out: - return retval; -} - -/* - * NOTE: The caller is responsible for locking the - * cache_lock prior to calling this function. - */ -static int release_cached_info(int spu_index) -{ - int index, end; - - if (spu_index == RELEASE_ALL) { - end = num_spu_nodes; - index = 0; - } else { - if (spu_index >= num_spu_nodes) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: " - "Invalid index %d into spu info cache\n", - __func__, __LINE__, spu_index); - goto out; - } - end = spu_index + 1; - index = spu_index; - } - for (; index < end; index++) { - if (spu_info[index]) { - kref_put(&spu_info[index]->cache_ref, - destroy_cached_info); - spu_info[index] = NULL; - } - } - -out: - return 0; -} - -/* The source code for fast_get_dcookie was "borrowed" - * from drivers/oprofile/buffer_sync.c. - */ - -/* Optimisation. We can manage without taking the dcookie sem - * because we cannot reach this code without at least one - * dcookie user still being registered (namely, the reader - * of the event buffer). - */ -static inline unsigned long fast_get_dcookie(const struct path *path) -{ - unsigned long cookie; - - if (path->dentry->d_flags & DCACHE_COOKIE) - return (unsigned long)path->dentry; - get_dcookie(path, &cookie); - return cookie; -} - -/* Look up the dcookie for the task's mm->exe_file, - * which corresponds loosely to "application name". Also, determine - * the offset for the SPU ELF object. If computed offset is - * non-zero, it implies an embedded SPU object; otherwise, it's a - * separate SPU binary, in which case we retrieve it's dcookie. - * For the embedded case, we must determine if SPU ELF is embedded - * in the executable application or another file (i.e., shared lib). - * If embedded in a shared lib, we must get the dcookie and return - * that to the caller. - */ -static unsigned long -get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp, - unsigned long *spu_bin_dcookie, - unsigned long spu_ref) -{ - unsigned long app_cookie = 0; - unsigned int my_offset = 0; - struct vm_area_struct *vma; - struct file *exe_file; - struct mm_struct *mm = spu->mm; - - if (!mm) - goto out; - - exe_file = get_mm_exe_file(mm); - if (exe_file) { - app_cookie = fast_get_dcookie(&exe_file->f_path); - pr_debug("got dcookie for %pD\n", exe_file); - fput(exe_file); - } - - mmap_read_lock(mm); - for (vma = mm->mmap; vma; vma = vma->vm_next) { - if (vma->vm_start > spu_ref || vma->vm_end <= spu_ref) - continue; - my_offset = spu_ref - vma->vm_start; - if (!vma->vm_file) - goto fail_no_image_cookie; - - pr_debug("Found spu ELF at %X(object-id:%lx) for file %pD\n", - my_offset, spu_ref, vma->vm_file); - *offsetp = my_offset; - break; - } - - *spu_bin_dcookie = fast_get_dcookie(&vma->vm_file->f_path); - pr_debug("got dcookie for %pD\n", vma->vm_file); - - mmap_read_unlock(mm); - -out: - return app_cookie; - -fail_no_image_cookie: - mmap_read_unlock(mm); - - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Cannot find dcookie for SPU binary\n", - __func__, __LINE__); - goto out; -} - - - -/* This function finds or creates cached context information for the - * passed SPU and records SPU context information into the OProfile - * event buffer. - */ -static int process_context_switch(struct spu *spu, unsigned long objectId) -{ - unsigned long flags; - int retval; - unsigned int offset = 0; - unsigned long spu_cookie = 0, app_dcookie; - - retval = prepare_cached_spu_info(spu, objectId); - if (retval) - goto out; - - /* Get dcookie first because a mutex_lock is taken in that - * code path, so interrupts must not be disabled. - */ - app_dcookie = get_exec_dcookie_and_offset(spu, &offset, &spu_cookie, objectId); - if (!app_dcookie || !spu_cookie) { - retval = -ENOENT; - goto out; - } - - /* Record context info in event buffer */ - spin_lock_irqsave(&buffer_lock, flags); - spu_buff_add(ESCAPE_CODE, spu->number); - spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number); - spu_buff_add(spu->number, spu->number); - spu_buff_add(spu->pid, spu->number); - spu_buff_add(spu->tgid, spu->number); - spu_buff_add(app_dcookie, spu->number); - spu_buff_add(spu_cookie, spu->number); - spu_buff_add(offset, spu->number); - - /* Set flag to indicate SPU PC data can now be written out. If - * the SPU program counter data is seen before an SPU context - * record is seen, the postprocessing will fail. - */ - spu_buff[spu->number].ctx_sw_seen = 1; - - spin_unlock_irqrestore(&buffer_lock, flags); - smp_wmb(); /* insure spu event buffer updates are written */ - /* don't want entries intermingled... */ -out: - return retval; -} - -/* - * This function is invoked on either a bind_context or unbind_context. - * If called for an unbind_context, the val arg is 0; otherwise, - * it is the object-id value for the spu context. - * The data arg is of type 'struct spu *'. - */ -static int spu_active_notify(struct notifier_block *self, unsigned long val, - void *data) -{ - int retval; - unsigned long flags; - struct spu *the_spu = data; - - pr_debug("SPU event notification arrived\n"); - if (!val) { - spin_lock_irqsave(&cache_lock, flags); - retval = release_cached_info(the_spu->number); - spin_unlock_irqrestore(&cache_lock, flags); - } else { - retval = process_context_switch(the_spu, val); - } - return retval; -} - -static struct notifier_block spu_active = { - .notifier_call = spu_active_notify, -}; - -static int number_of_online_nodes(void) -{ - u32 cpu; u32 tmp; - int nodes = 0; - for_each_online_cpu(cpu) { - tmp = cbe_cpu_to_node(cpu) + 1; - if (tmp > nodes) - nodes++; - } - return nodes; -} - -static int oprofile_spu_buff_create(void) -{ - int spu; - - max_spu_buff = oprofile_get_cpu_buffer_size(); - - for (spu = 0; spu < num_spu_nodes; spu++) { - /* create circular buffers to store the data in. - * use locks to manage accessing the buffers - */ - spu_buff[spu].head = 0; - spu_buff[spu].tail = 0; - - /* - * Create a buffer for each SPU. Can't reliably - * create a single buffer for all spus due to not - * enough contiguous kernel memory. - */ - - spu_buff[spu].buff = kzalloc((max_spu_buff - * sizeof(unsigned long)), - GFP_KERNEL); - - if (!spu_buff[spu].buff) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: oprofile_spu_buff_create " - "failed to allocate spu buffer %d.\n", - __func__, __LINE__, spu); - - /* release the spu buffers that have been allocated */ - while (spu >= 0) { - kfree(spu_buff[spu].buff); - spu_buff[spu].buff = 0; - spu--; - } - return -ENOMEM; - } - } - return 0; -} - -/* The main purpose of this function is to synchronize - * OProfile with SPUFS by registering to be notified of - * SPU task switches. - * - * NOTE: When profiling SPUs, we must ensure that only - * spu_sync_start is invoked and not the generic sync_start - * in drivers/oprofile/oprof.c. A return value of - * SKIP_GENERIC_SYNC or SYNC_START_ERROR will - * accomplish this. - */ -int spu_sync_start(void) -{ - int spu; - int ret = SKIP_GENERIC_SYNC; - int register_ret; - unsigned long flags = 0; - - spu_prof_num_nodes = number_of_online_nodes(); - num_spu_nodes = spu_prof_num_nodes * 8; - INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff); - - /* create buffer for storing the SPU data to put in - * the kernel buffer. - */ - ret = oprofile_spu_buff_create(); - if (ret) - goto out; - - spin_lock_irqsave(&buffer_lock, flags); - for (spu = 0; spu < num_spu_nodes; spu++) { - spu_buff_add(ESCAPE_CODE, spu); - spu_buff_add(SPU_PROFILING_CODE, spu); - spu_buff_add(num_spu_nodes, spu); - } - spin_unlock_irqrestore(&buffer_lock, flags); - - for (spu = 0; spu < num_spu_nodes; spu++) { - spu_buff[spu].ctx_sw_seen = 0; - spu_buff[spu].last_guard_val = 0; - } - - /* Register for SPU events */ - register_ret = spu_switch_event_register(&spu_active); - if (register_ret) { - ret = SYNC_START_ERROR; - goto out; - } - - pr_debug("spu_sync_start -- running.\n"); -out: - return ret; -} - -/* Record SPU program counter samples to the oprofile event buffer. */ -void spu_sync_buffer(int spu_num, unsigned int *samples, - int num_samples) -{ - unsigned long long file_offset; - unsigned long flags; - int i; - struct vma_to_fileoffset_map *map; - struct spu *the_spu; - unsigned long long spu_num_ll = spu_num; - unsigned long long spu_num_shifted = spu_num_ll << 32; - struct cached_info *c_info; - - /* We need to obtain the cache_lock here because it's - * possible that after getting the cached_info, the SPU job - * corresponding to this cached_info may end, thus resulting - * in the destruction of the cached_info. - */ - spin_lock_irqsave(&cache_lock, flags); - c_info = get_cached_info(NULL, spu_num); - if (!c_info) { - /* This legitimately happens when the SPU task ends before all - * samples are recorded. - * No big deal -- so we just drop a few samples. - */ - pr_debug("SPU_PROF: No cached SPU context " - "for SPU #%d. Dropping samples.\n", spu_num); - goto out; - } - - map = c_info->map; - the_spu = c_info->the_spu; - spin_lock(&buffer_lock); - for (i = 0; i < num_samples; i++) { - unsigned int sample = *(samples+i); - int grd_val = 0; - file_offset = 0; - if (sample == 0) - continue; - file_offset = vma_map_lookup( map, sample, the_spu, &grd_val); - - /* If overlays are used by this SPU application, the guard - * value is non-zero, indicating which overlay section is in - * use. We need to discard samples taken during the time - * period which an overlay occurs (i.e., guard value changes). - */ - if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) { - spu_buff[spu_num].last_guard_val = grd_val; - /* Drop the rest of the samples. */ - break; - } - - /* We must ensure that the SPU context switch has been written - * out before samples for the SPU. Otherwise, the SPU context - * information is not available and the postprocessing of the - * SPU PC will fail with no available anonymous map information. - */ - if (spu_buff[spu_num].ctx_sw_seen) - spu_buff_add((file_offset | spu_num_shifted), - spu_num); - } - spin_unlock(&buffer_lock); -out: - spin_unlock_irqrestore(&cache_lock, flags); -} - - -int spu_sync_stop(void) -{ - unsigned long flags = 0; - int ret; - int k; - - ret = spu_switch_event_unregister(&spu_active); - - if (ret) - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: spu_switch_event_unregister " \ - "returned %d\n", - __func__, __LINE__, ret); - - /* flush any remaining data in the per SPU buffers */ - sync_spu_buff(); - - spin_lock_irqsave(&cache_lock, flags); - ret = release_cached_info(RELEASE_ALL); - spin_unlock_irqrestore(&cache_lock, flags); - - /* remove scheduled work queue item rather then waiting - * for every queued entry to execute. Then flush pending - * system wide buffer to event buffer. - */ - cancel_delayed_work(&spu_work); - - for (k = 0; k < num_spu_nodes; k++) { - spu_buff[k].ctx_sw_seen = 0; - - /* - * spu_sys_buff will be null if there was a problem - * allocating the buffer. Only delete if it exists. - */ - kfree(spu_buff[k].buff); - spu_buff[k].buff = 0; - } - pr_debug("spu_sync_stop -- done.\n"); - return ret; -} - diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c deleted file mode 100644 index 7c4b19c..0000000 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ /dev/null @@ -1,279 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Cell Broadband Engine OProfile Support - * - * (C) Copyright IBM Corporation 2006 - * - * Author: Maynard Johnson - */ - -/* The code in this source file is responsible for generating - * vma-to-fileOffset maps for both overlay and non-overlay SPU - * applications. - */ - -#include -#include -#include -#include -#include -#include "pr_util.h" - - -void vma_map_free(struct vma_to_fileoffset_map *map) -{ - while (map) { - struct vma_to_fileoffset_map *next = map->next; - kfree(map); - map = next; - } -} - -unsigned int -vma_map_lookup(struct vma_to_fileoffset_map *map, unsigned int vma, - const struct spu *aSpu, int *grd_val) -{ - /* - * Default the offset to the physical address + a flag value. - * Addresses of dynamically generated code can't be found in the vma - * map. For those addresses the flagged value will be sent on to - * the user space tools so they can be reported rather than just - * thrown away. - */ - u32 offset = 0x10000000 + vma; - u32 ovly_grd; - - for (; map; map = map->next) { - if (vma < map->vma || vma >= map->vma + map->size) - continue; - - if (map->guard_ptr) { - ovly_grd = *(u32 *)(aSpu->local_store + map->guard_ptr); - if (ovly_grd != map->guard_val) - continue; - *grd_val = ovly_grd; - } - offset = vma - map->vma + map->offset; - break; - } - - return offset; -} - -static struct vma_to_fileoffset_map * -vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, - unsigned int size, unsigned int offset, unsigned int guard_ptr, - unsigned int guard_val) -{ - struct vma_to_fileoffset_map *new = kzalloc(sizeof(*new), GFP_KERNEL); - - if (!new) { - printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n", - __func__, __LINE__); - vma_map_free(map); - return NULL; - } - - new->next = map; - new->vma = vma; - new->size = size; - new->offset = offset; - new->guard_ptr = guard_ptr; - new->guard_val = guard_val; - - return new; -} - - -/* Parse SPE ELF header and generate a list of vma_maps. - * A pointer to the first vma_map in the generated list - * of vma_maps is returned. */ -struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, - unsigned long __spu_elf_start) -{ - static const unsigned char expected[EI_PAD] = { - [EI_MAG0] = ELFMAG0, - [EI_MAG1] = ELFMAG1, - [EI_MAG2] = ELFMAG2, - [EI_MAG3] = ELFMAG3, - [EI_CLASS] = ELFCLASS32, - [EI_DATA] = ELFDATA2MSB, - [EI_VERSION] = EV_CURRENT, - [EI_OSABI] = ELFOSABI_NONE - }; - - int grd_val; - struct vma_to_fileoffset_map *map = NULL; - void __user *spu_elf_start = (void __user *)__spu_elf_start; - struct spu_overlay_info ovly; - unsigned int overlay_tbl_offset = -1; - Elf32_Phdr __user *phdr_start; - Elf32_Shdr __user *shdr_start; - Elf32_Ehdr ehdr; - Elf32_Phdr phdr; - Elf32_Shdr shdr, shdr_str; - Elf32_Sym sym; - int i, j; - char name[32]; - - unsigned int ovly_table_sym = 0; - unsigned int ovly_buf_table_sym = 0; - unsigned int ovly_table_end_sym = 0; - unsigned int ovly_buf_table_end_sym = 0; - struct spu_overlay_info __user *ovly_table; - unsigned int n_ovlys; - - /* Get and validate ELF header. */ - - if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr))) - goto fail; - - if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Unexpected e_ident parsing SPU ELF\n", - __func__, __LINE__); - goto fail; - } - if (ehdr.e_machine != EM_SPU) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Unexpected e_machine parsing SPU ELF\n", - __func__, __LINE__); - goto fail; - } - if (ehdr.e_type != ET_EXEC) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Unexpected e_type parsing SPU ELF\n", - __func__, __LINE__); - goto fail; - } - phdr_start = spu_elf_start + ehdr.e_phoff; - shdr_start = spu_elf_start + ehdr.e_shoff; - - /* Traverse program headers. */ - for (i = 0; i < ehdr.e_phnum; i++) { - if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr))) - goto fail; - - if (phdr.p_type != PT_LOAD) - continue; - if (phdr.p_flags & (1 << 27)) - continue; - - map = vma_map_add(map, phdr.p_vaddr, phdr.p_memsz, - phdr.p_offset, 0, 0); - if (!map) - goto fail; - } - - pr_debug("SPU_PROF: Created non-overlay maps\n"); - /* Traverse section table and search for overlay-related symbols. */ - for (i = 0; i < ehdr.e_shnum; i++) { - if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr))) - goto fail; - - if (shdr.sh_type != SHT_SYMTAB) - continue; - if (shdr.sh_entsize != sizeof (sym)) - continue; - - if (copy_from_user(&shdr_str, - shdr_start + shdr.sh_link, - sizeof(shdr))) - goto fail; - - if (shdr_str.sh_type != SHT_STRTAB) - goto fail; - - for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { - if (copy_from_user(&sym, spu_elf_start + - shdr.sh_offset + - j * sizeof (sym), - sizeof (sym))) - goto fail; - - if (copy_from_user(name, - spu_elf_start + shdr_str.sh_offset + - sym.st_name, - 20)) - goto fail; - - if (memcmp(name, "_ovly_table", 12) == 0) - ovly_table_sym = sym.st_value; - if (memcmp(name, "_ovly_buf_table", 16) == 0) - ovly_buf_table_sym = sym.st_value; - if (memcmp(name, "_ovly_table_end", 16) == 0) - ovly_table_end_sym = sym.st_value; - if (memcmp(name, "_ovly_buf_table_end", 20) == 0) - ovly_buf_table_end_sym = sym.st_value; - } - } - - /* If we don't have overlays, we're done. */ - if (ovly_table_sym == 0 || ovly_buf_table_sym == 0 - || ovly_table_end_sym == 0 || ovly_buf_table_end_sym == 0) { - pr_debug("SPU_PROF: No overlay table found\n"); - goto out; - } else { - pr_debug("SPU_PROF: Overlay table found\n"); - } - - /* The _ovly_table symbol represents a table with one entry - * per overlay section. The _ovly_buf_table symbol represents - * a table with one entry per overlay region. - * The struct spu_overlay_info gives the structure of the _ovly_table - * entries. The structure of _ovly_table_buf is simply one - * u32 word per entry. - */ - overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym, - aSpu, &grd_val); - if (overlay_tbl_offset > 0x10000000) { - printk(KERN_ERR "SPU_PROF: " - "%s, line %d: Error finding SPU overlay table\n", - __func__, __LINE__); - goto fail; - } - ovly_table = spu_elf_start + overlay_tbl_offset; - - n_ovlys = (ovly_table_end_sym - - ovly_table_sym) / sizeof (ovly); - - /* Traverse overlay table. */ - for (i = 0; i < n_ovlys; i++) { - if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly))) - goto fail; - - /* The ovly.vma/size/offset arguments are analogous to the same - * arguments used above for non-overlay maps. The final two - * args are referred to as the guard pointer and the guard - * value. - * The guard pointer is an entry in the _ovly_buf_table, - * computed using ovly.buf as the index into the table. Since - * ovly.buf values begin at '1' to reference the first (or 0th) - * entry in the _ovly_buf_table, the computation subtracts 1 - * from ovly.buf. - * The guard value is stored in the _ovly_buf_table entry and - * is an index (starting at 1) back to the _ovly_table entry - * that is pointing at this _ovly_buf_table entry. So, for - * example, for an overlay scenario with one overlay segment - * and two overlay sections: - * - Section 1 points to the first entry of the - * _ovly_buf_table, which contains a guard value - * of '1', referencing the first (index=0) entry of - * _ovly_table. - * - Section 2 points to the second entry of the - * _ovly_buf_table, which contains a guard value - * of '2', referencing the second (index=1) entry of - * _ovly_table. - */ - map = vma_map_add(map, ovly.vma, ovly.size, ovly.offset, - ovly_buf_table_sym + (ovly.buf-1) * 4, i+1); - if (!map) - goto fail; - } - goto out; - - fail: - map = NULL; - out: - return map; -} diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c deleted file mode 100644 index 0fb528c..0000000 --- a/arch/powerpc/oprofile/common.c +++ /dev/null @@ -1,243 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * PPC 64 oprofile support: - * Copyright (C) 2004 Anton Blanchard , IBM - * PPC 32 oprofile support: (based on PPC 64 support) - * Copyright (C) Freescale Semiconductor, Inc 2004 - * Author: Andy Fleming - * - * Based on alpha version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct op_powerpc_model *model; - -static struct op_counter_config ctr[OP_MAX_COUNTER]; -static struct op_system_config sys; - -static int op_per_cpu_rc; - -static void op_handle_interrupt(struct pt_regs *regs) -{ - model->handle_interrupt(regs, ctr); -} - -static void op_powerpc_cpu_setup(void *dummy) -{ - int ret; - - ret = model->cpu_setup(ctr); - - if (ret != 0) - op_per_cpu_rc = ret; -} - -static int op_powerpc_setup(void) -{ - int err; - - op_per_cpu_rc = 0; - - /* Grab the hardware */ - err = reserve_pmc_hardware(op_handle_interrupt); - if (err) - return err; - - /* Pre-compute the values to stuff in the hardware registers. */ - op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters); - - if (op_per_cpu_rc) - goto out; - - /* Configure the registers on all cpus. If an error occurs on one - * of the cpus, op_per_cpu_rc will be set to the error */ - on_each_cpu(op_powerpc_cpu_setup, NULL, 1); - -out: if (op_per_cpu_rc) { - /* error on setup release the performance counter hardware */ - release_pmc_hardware(); - } - - return op_per_cpu_rc; -} - -static void op_powerpc_shutdown(void) -{ - release_pmc_hardware(); -} - -static void op_powerpc_cpu_start(void *dummy) -{ - /* If any of the cpus have return an error, set the - * global flag to the error so it can be returned - * to the generic OProfile caller. - */ - int ret; - - ret = model->start(ctr); - if (ret != 0) - op_per_cpu_rc = ret; -} - -static int op_powerpc_start(void) -{ - op_per_cpu_rc = 0; - - if (model->global_start) - return model->global_start(ctr); - if (model->start) { - on_each_cpu(op_powerpc_cpu_start, NULL, 1); - return op_per_cpu_rc; - } - return -EIO; /* No start function is defined for this - power architecture */ -} - -static inline void op_powerpc_cpu_stop(void *dummy) -{ - model->stop(); -} - -static void op_powerpc_stop(void) -{ - if (model->stop) - on_each_cpu(op_powerpc_cpu_stop, NULL, 1); - if (model->global_stop) - model->global_stop(); -} - -static int op_powerpc_create_files(struct dentry *root) -{ - int i; - -#ifdef CONFIG_PPC64 - /* - * There is one mmcr0, mmcr1 and mmcra for setting the events for - * all of the counters. - */ - oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0); - oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1); - oprofilefs_create_ulong(root, "mmcra", &sys.mmcra); -#ifdef CONFIG_OPROFILE_CELL - /* create a file the user tool can check to see what level of profiling - * support exits with this kernel. Initialize bit mask to indicate - * what support the kernel has: - * bit 0 - Supports SPU event profiling in addition to PPU - * event and cycles; and SPU cycle profiling - * bits 1-31 - Currently unused. - * - * If the file does not exist, then the kernel only supports SPU - * cycle profiling, PPU event and cycle profiling. - */ - oprofilefs_create_ulong(root, "cell_support", &sys.cell_support); - sys.cell_support = 0x1; /* Note, the user OProfile tool must check - * that this bit is set before attempting to - * user SPU event profiling. Older kernels - * will not have this file, hence the user - * tool is not allowed to do SPU event - * profiling on older kernels. Older kernels - * will accept SPU events but collected data - * is garbage. - */ -#endif -#endif - - for (i = 0; i < model->num_counters; ++i) { - struct dentry *dir; - char buf[4]; - - snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(root, buf); - - oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(dir, "event", &ctr[i].event); - oprofilefs_create_ulong(dir, "count", &ctr[i].count); - - /* - * Classic PowerPC doesn't support per-counter - * control like this, but the options are - * expected, so they remain. For Freescale - * Book-E style performance monitors, we do - * support them. - */ - oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(dir, "user", &ctr[i].user); - - oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask); - } - - oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel); - oprofilefs_create_ulong(root, "enable_user", &sys.enable_user); - - /* Default to tracing both kernel and user */ - sys.enable_kernel = 1; - sys.enable_user = 1; - - return 0; -} - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - if (!cur_cpu_spec->oprofile_cpu_type) - return -ENODEV; - - switch (cur_cpu_spec->oprofile_type) { -#ifdef CONFIG_PPC_BOOK3S_64 -#ifdef CONFIG_OPROFILE_CELL - case PPC_OPROFILE_CELL: - if (firmware_has_feature(FW_FEATURE_LPAR)) - return -ENODEV; - model = &op_model_cell; - ops->sync_start = model->sync_start; - ops->sync_stop = model->sync_stop; - break; -#endif - case PPC_OPROFILE_POWER4: - model = &op_model_power4; - break; - case PPC_OPROFILE_PA6T: - model = &op_model_pa6t; - break; -#endif -#ifdef CONFIG_PPC_BOOK3S_32 - case PPC_OPROFILE_G4: - model = &op_model_7450; - break; -#endif -#if defined(CONFIG_FSL_EMB_PERFMON) - case PPC_OPROFILE_FSL_EMB: - model = &op_model_fsl_emb; - break; -#endif - default: - return -ENODEV; - } - - model->num_counters = cur_cpu_spec->num_pmcs; - - ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; - ops->create_files = op_powerpc_create_files; - ops->setup = op_powerpc_setup; - ops->shutdown = op_powerpc_shutdown; - ops->start = op_powerpc_start; - ops->stop = op_powerpc_stop; - ops->backtrace = op_powerpc_backtrace; - - printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n", - ops->cpu_type); - - return 0; -} - -void oprofile_arch_exit(void) -{ -} diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c deleted file mode 100644 index 5ebc251..0000000 --- a/arch/powerpc/oprofile/op_model_7450.c +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/powerpc/oprofile/op_model_7450.c - * - * Freescale 745x/744x oprofile support, based on fsl_booke support - * Copyright (C) 2004 Anton Blanchard , IBM - * - * Copyright (c) 2004 Freescale Semiconductor, Inc - * - * Author: Andy Fleming - * Maintainer: Kumar Gala - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int oprofile_running; -static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs; - -#define MMCR0_PMC1_SHIFT 6 -#define MMCR0_PMC2_SHIFT 0 -#define MMCR1_PMC3_SHIFT 27 -#define MMCR1_PMC4_SHIFT 22 -#define MMCR1_PMC5_SHIFT 17 -#define MMCR1_PMC6_SHIFT 11 - -#define mmcr0_event1(event) \ - ((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL) -#define mmcr0_event2(event) \ - ((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL) - -#define mmcr1_event3(event) \ - ((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL) -#define mmcr1_event4(event) \ - ((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL) -#define mmcr1_event5(event) \ - ((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL) -#define mmcr1_event6(event) \ - ((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL) - -#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0) - -/* Unfreezes the counters on this CPU, enables the interrupt, - * enables the counters to trigger the interrupt, and sets the - * counters to only count when the mark bit is not set. - */ -static void pmc_start_ctrs(void) -{ - u32 mmcr0 = mfspr(SPRN_MMCR0); - - mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0); - mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); - - mtspr(SPRN_MMCR0, mmcr0); -} - -/* Disables the counters on this CPU, and freezes them */ -static void pmc_stop_ctrs(void) -{ - u32 mmcr0 = mfspr(SPRN_MMCR0); - - mmcr0 |= MMCR0_FC; - mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); - - mtspr(SPRN_MMCR0, mmcr0); -} - -/* Configures the counters on this CPU based on the global - * settings */ -static int fsl7450_cpu_setup(struct op_counter_config *ctr) -{ - /* freeze all counters */ - pmc_stop_ctrs(); - - mtspr(SPRN_MMCR0, mmcr0_val); - mtspr(SPRN_MMCR1, mmcr1_val); - if (num_pmcs > 4) - mtspr(SPRN_MMCR2, mmcr2_val); - - return 0; -} - -/* Configures the global settings for the countes on all CPUs. */ -static int fsl7450_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - num_pmcs = num_ctrs; - /* Our counters count up, and "count" refers to - * how much before the next interrupt, and we interrupt - * on overflow. So we calculate the starting value - * which will give us "count" until overflow. - * Then we set the events on the enabled counters */ - for (i = 0; i < num_ctrs; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* Set events for Counters 1 & 2 */ - mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event) - | mmcr0_event2(ctr[1].event); - - /* Setup user/kernel bits */ - if (sys->enable_kernel) - mmcr0_val &= ~(MMCR0_FCS); - - if (sys->enable_user) - mmcr0_val &= ~(MMCR0_FCP); - - /* Set events for Counters 3-6 */ - mmcr1_val = mmcr1_event3(ctr[2].event) - | mmcr1_event4(ctr[3].event); - if (num_ctrs > 4) - mmcr1_val |= mmcr1_event5(ctr[4].event) - | mmcr1_event6(ctr[5].event); - - mmcr2_val = 0; - - return 0; -} - -/* Sets the counters on this CPU to the chosen values, and starts them */ -static int fsl7450_start(struct op_counter_config *ctr) -{ - int i; - - mtmsr(mfmsr() | MSR_PMM); - - for (i = 0; i < num_pmcs; ++i) { - if (ctr[i].enabled) - classic_ctr_write(i, reset_value[i]); - else - classic_ctr_write(i, 0); - } - - /* Clear the freeze bit, and enable the interrupt. - * The counters won't actually start until the rfi clears - * the PMM bit */ - pmc_start_ctrs(); - - oprofile_running = 1; - - return 0; -} - -/* Stop the counters on this CPU */ -static void fsl7450_stop(void) -{ - /* freeze counters */ - pmc_stop_ctrs(); - - oprofile_running = 0; - - mb(); -} - - -/* Handle the interrupt on this CPU, and log a sample for each - * event that triggered the interrupt */ -static void fsl7450_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned long pc; - int is_kernel; - int val; - int i; - - /* set the PMM bit (see comment below) */ - mtmsr(mfmsr() | MSR_PMM); - - pc = mfspr(SPRN_SIAR); - is_kernel = is_kernel_addr(pc); - - for (i = 0; i < num_pmcs; ++i) { - val = classic_ctr_read(i); - if (val < 0) { - if (oprofile_running && ctr[i].enabled) { - oprofile_add_ext_sample(pc, regs, i, is_kernel); - classic_ctr_write(i, reset_value[i]); - } else { - classic_ctr_write(i, 0); - } - } - } - - /* The freeze bit was set by the interrupt. */ - /* Clear the freeze bit, and reenable the interrupt. - * The counters won't actually start until the rfi clears - * the PM/M bit */ - pmc_start_ctrs(); -} - -struct op_powerpc_model op_model_7450= { - .reg_setup = fsl7450_reg_setup, - .cpu_setup = fsl7450_cpu_setup, - .start = fsl7450_start, - .stop = fsl7450_stop, - .handle_interrupt = fsl7450_handle_interrupt, -}; diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c deleted file mode 100644 index 7eb7307..0000000 --- a/arch/powerpc/oprofile/op_model_cell.c +++ /dev/null @@ -1,1709 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Cell Broadband Engine OProfile Support - * - * (C) Copyright IBM Corporation 2006 - * - * Author: David Erb (djerb@us.ibm.com) - * Modifications: - * Carl Love - * Maynard Johnson - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../platforms/cell/interrupt.h" -#include "cell/pr_util.h" - -#define PPU_PROFILING 0 -#define SPU_PROFILING_CYCLES 1 -#define SPU_PROFILING_EVENTS 2 - -#define SPU_EVENT_NUM_START 4100 -#define SPU_EVENT_NUM_STOP 4399 -#define SPU_PROFILE_EVENT_ADDR 4363 /* spu, address trace, decimal */ -#define SPU_PROFILE_EVENT_ADDR_MASK_A 0x146 /* sub unit set to zero */ -#define SPU_PROFILE_EVENT_ADDR_MASK_B 0x186 /* sub unit set to zero */ - -#define NUM_SPUS_PER_NODE 8 -#define SPU_CYCLES_EVENT_NUM 2 /* event number for SPU_CYCLES */ - -#define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ -#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying - * PPU_CYCLES event - */ -#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ - -#define NUM_THREADS 2 /* number of physical threads in - * physical processor - */ -#define NUM_DEBUG_BUS_WORDS 4 -#define NUM_INPUT_BUS_WORDS 2 - -#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */ - -/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle. - * To configure counter to send value every N cycles set counter to - * 2^32 - 1 - N. - */ -#define NUM_INTERVAL_CYC 0xFFFFFFFF - 10 - -/* - * spu_cycle_reset is the number of cycles between samples. - * This variable is used for SPU profiling and should ONLY be set - * at the beginning of cell_reg_setup; otherwise, it's read-only. - */ -static unsigned int spu_cycle_reset; -static unsigned int profiling_mode; -static int spu_evnt_phys_spu_indx; - -struct pmc_cntrl_data { - unsigned long vcntr; - unsigned long evnts; - unsigned long masks; - unsigned long enabled; -}; - -/* - * ibm,cbe-perftools rtas parameters - */ -struct pm_signal { - u16 cpu; /* Processor to modify */ - u16 sub_unit; /* hw subunit this applies to (if applicable)*/ - short int signal_group; /* Signal Group to Enable/Disable */ - u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event - * Bus Word(s) (bitmask) - */ - u8 bit; /* Trigger/Event bit (if applicable) */ -}; - -/* - * rtas call arguments - */ -enum { - SUBFUNC_RESET = 1, - SUBFUNC_ACTIVATE = 2, - SUBFUNC_DEACTIVATE = 3, - - PASSTHRU_IGNORE = 0, - PASSTHRU_ENABLE = 1, - PASSTHRU_DISABLE = 2, -}; - -struct pm_cntrl { - u16 enable; - u16 stop_at_max; - u16 trace_mode; - u16 freeze; - u16 count_mode; - u16 spu_addr_trace; - u8 trace_buf_ovflw; -}; - -static struct { - u32 group_control; - u32 debug_bus_control; - struct pm_cntrl pm_cntrl; - u32 pm07_cntrl[NR_PHYS_CTRS]; -} pm_regs; - -#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) -#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) -#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) -#define GET_POLARITY(x) ((x & 0x00000002) >> 1) -#define GET_COUNT_CYCLES(x) (x & 0x00000001) -#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) - -static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); -static unsigned long spu_pm_cnt[MAX_NUMNODES * NUM_SPUS_PER_NODE]; -static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; - -/* - * The CELL profiling code makes rtas calls to setup the debug bus to - * route the performance signals. Additionally, SPU profiling requires - * a second rtas call to setup the hardware to capture the SPU PCs. - * The EIO error value is returned if the token lookups or the rtas - * call fail. The EIO error number is the best choice of the existing - * error numbers. The probability of rtas related error is very low. But - * by returning EIO and printing additional information to dmsg the user - * will know that OProfile did not start and dmesg will tell them why. - * OProfile does not support returning errors on Stop. Not a huge issue - * since failure to reset the debug bus or stop the SPU PC collection is - * not a fatel issue. Chances are if the Stop failed, Start doesn't work - * either. - */ - -/* - * Interpetation of hdw_thread: - * 0 - even virtual cpus 0, 2, 4,... - * 1 - odd virtual cpus 1, 3, 5, ... - * - * FIXME: this is strictly wrong, we need to clean this up in a number - * of places. It works for now. -arnd - */ -static u32 hdw_thread; - -static u32 virt_cntr_inter_mask; -static struct timer_list timer_virt_cntr; -static struct timer_list timer_spu_event_swap; - -/* - * pm_signal needs to be global since it is initialized in - * cell_reg_setup at the time when the necessary information - * is available. - */ -static struct pm_signal pm_signal[NR_PHYS_CTRS]; -static int pm_rtas_token; /* token for debug bus setup call */ -static int spu_rtas_token; /* token for SPU cycle profiling */ - -static u32 reset_value[NR_PHYS_CTRS]; -static int num_counters; -static int oprofile_running; -static DEFINE_SPINLOCK(cntr_lock); - -static u32 ctr_enabled; - -static unsigned char input_bus[NUM_INPUT_BUS_WORDS]; - -/* - * Firmware interface functions - */ -static int -rtas_ibm_cbe_perftools(int subfunc, int passthru, - void *address, unsigned long length) -{ - u64 paddr = __pa(address); - - return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, - passthru, paddr >> 32, paddr & 0xffffffff, length); -} - -static void pm_rtas_reset_signals(u32 node) -{ - int ret; - struct pm_signal pm_signal_local; - - /* - * The debug bus is being set to the passthru disable state. - * However, the FW still expects at least one legal signal routing - * entry or it will return an error on the arguments. If we don't - * supply a valid entry, we must ignore all return values. Ignoring - * all return values means we might miss an error we should be - * concerned about. - */ - - /* fw expects physical cpu #. */ - pm_signal_local.cpu = node; - pm_signal_local.signal_group = 21; - pm_signal_local.bus_word = 1; - pm_signal_local.sub_unit = 0; - pm_signal_local.bit = 0; - - ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, PASSTHRU_DISABLE, - &pm_signal_local, - sizeof(struct pm_signal)); - - if (unlikely(ret)) - /* - * Not a fatal error. For Oprofile stop, the oprofile - * functions do not support returning an error for - * failure to stop OProfile. - */ - printk(KERN_WARNING "%s: rtas returned: %d\n", - __func__, ret); -} - -static int pm_rtas_activate_signals(u32 node, u32 count) -{ - int ret; - int i, j; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; - - /* - * There is no debug setup required for the cycles event. - * Note that only events in the same group can be used. - * Otherwise, there will be conflicts in correctly routing - * the signals on the debug bus. It is the responsibility - * of the OProfile user tool to check the events are in - * the same group. - */ - i = 0; - for (j = 0; j < count; j++) { - if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) { - - /* fw expects physical cpu # */ - pm_signal_local[i].cpu = node; - pm_signal_local[i].signal_group - = pm_signal[j].signal_group; - pm_signal_local[i].bus_word = pm_signal[j].bus_word; - pm_signal_local[i].sub_unit = pm_signal[j].sub_unit; - pm_signal_local[i].bit = pm_signal[j].bit; - i++; - } - } - - if (i != 0) { - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, - pm_signal_local, - i * sizeof(struct pm_signal)); - - if (unlikely(ret)) { - printk(KERN_WARNING "%s: rtas returned: %d\n", - __func__, ret); - return -EIO; - } - } - - return 0; -} - -/* - * PM Signal functions - */ -static void set_pm_event(u32 ctr, int event, u32 unit_mask) -{ - struct pm_signal *p; - u32 signal_bit; - u32 bus_word, bus_type, count_cycles, polarity, input_control; - int j, i; - - if (event == PPU_CYCLES_EVENT_NUM) { - /* Special Event: Count all cpu cycles */ - pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; - p = &(pm_signal[ctr]); - p->signal_group = PPU_CYCLES_GRP_NUM; - p->bus_word = 1; - p->sub_unit = 0; - p->bit = 0; - goto out; - } else { - pm_regs.pm07_cntrl[ctr] = 0; - } - - bus_word = GET_BUS_WORD(unit_mask); - bus_type = GET_BUS_TYPE(unit_mask); - count_cycles = GET_COUNT_CYCLES(unit_mask); - polarity = GET_POLARITY(unit_mask); - input_control = GET_INPUT_CONTROL(unit_mask); - signal_bit = (event % 100); - - p = &(pm_signal[ctr]); - - p->signal_group = event / 100; - p->bus_word = bus_word; - p->sub_unit = GET_SUB_UNIT(unit_mask); - - pm_regs.pm07_cntrl[ctr] = 0; - pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); - pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); - pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); - - /* - * Some of the islands signal selection is based on 64 bit words. - * The debug bus words are 32 bits, the input words to the performance - * counters are defined as 32 bits. Need to convert the 64 bit island - * specification to the appropriate 32 input bit and bus word for the - * performance counter event selection. See the CELL Performance - * monitoring signals manual and the Perf cntr hardware descriptions - * for the details. - */ - if (input_control == 0) { - if (signal_bit > 31) { - signal_bit -= 32; - if (bus_word == 0x3) - bus_word = 0x2; - else if (bus_word == 0xc) - bus_word = 0x8; - } - - if ((bus_type == 0) && p->signal_group >= 60) - bus_type = 2; - if ((bus_type == 1) && p->signal_group >= 50) - bus_type = 0; - - pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit); - } else { - pm_regs.pm07_cntrl[ctr] = 0; - p->bit = signal_bit; - } - - for (i = 0; i < NUM_DEBUG_BUS_WORDS; i++) { - if (bus_word & (1 << i)) { - pm_regs.debug_bus_control |= - (bus_type << (30 - (2 * i))); - - for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) { - if (input_bus[j] == 0xff) { - input_bus[j] = i; - pm_regs.group_control |= - (i << (30 - (2 * j))); - - break; - } - } - } - } -out: - ; -} - -static void write_pm_cntrl(int cpu) -{ - /* - * Oprofile will use 32 bit counters, set bits 7:10 to 0 - * pmregs.pm_cntrl is a global - */ - - u32 val = 0; - if (pm_regs.pm_cntrl.enable == 1) - val |= CBE_PM_ENABLE_PERF_MON; - - if (pm_regs.pm_cntrl.stop_at_max == 1) - val |= CBE_PM_STOP_AT_MAX; - - if (pm_regs.pm_cntrl.trace_mode != 0) - val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode); - - if (pm_regs.pm_cntrl.trace_buf_ovflw == 1) - val |= CBE_PM_TRACE_BUF_OVFLW(pm_regs.pm_cntrl.trace_buf_ovflw); - if (pm_regs.pm_cntrl.freeze == 1) - val |= CBE_PM_FREEZE_ALL_CTRS; - - val |= CBE_PM_SPU_ADDR_TRACE_SET(pm_regs.pm_cntrl.spu_addr_trace); - - /* - * Routine set_count_mode must be called previously to set - * the count mode based on the user selection of user and kernel. - */ - val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); - cbe_write_pm(cpu, pm_control, val); -} - -static inline void -set_count_mode(u32 kernel, u32 user) -{ - /* - * The user must specify user and kernel if they want them. If - * neither is specified, OProfile will count in hypervisor mode. - * pm_regs.pm_cntrl is a global - */ - if (kernel) { - if (user) - pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES; - else - pm_regs.pm_cntrl.count_mode = - CBE_COUNT_SUPERVISOR_MODE; - } else { - if (user) - pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE; - else - pm_regs.pm_cntrl.count_mode = - CBE_COUNT_HYPERVISOR_MODE; - } -} - -static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl) -{ - - pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; - cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); -} - -/* - * Oprofile is expected to collect data on all CPUs simultaneously. - * However, there is one set of performance counters per node. There are - * two hardware threads or virtual CPUs on each node. Hence, OProfile must - * multiplex in time the performance counter collection on the two virtual - * CPUs. The multiplexing of the performance counters is done by this - * virtual counter routine. - * - * The pmc_values used below is defined as 'per-cpu' but its use is - * more akin to 'per-node'. We need to store two sets of counter - * values per node -- one for the previous run and one for the next. - * The per-cpu[NR_PHYS_CTRS] gives us the storage we need. Each odd/even - * pair of per-cpu arrays is used for storing the previous and next - * pmc values for a given node. - * NOTE: We use the per-cpu variable to improve cache performance. - * - * This routine will alternate loading the virtual counters for - * virtual CPUs - */ -static void cell_virtual_cntr(struct timer_list *unused) -{ - int i, prev_hdw_thread, next_hdw_thread; - u32 cpu; - unsigned long flags; - - /* - * Make sure that the interrupt_hander and the virt counter are - * not both playing with the counters on the same node. - */ - - spin_lock_irqsave(&cntr_lock, flags); - - prev_hdw_thread = hdw_thread; - - /* switch the cpu handling the interrupts */ - hdw_thread = 1 ^ hdw_thread; - next_hdw_thread = hdw_thread; - - pm_regs.group_control = 0; - pm_regs.debug_bus_control = 0; - - for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) - input_bus[i] = 0xff; - - /* - * There are some per thread events. Must do the - * set event, for the thread that is being started - */ - for (i = 0; i < num_counters; i++) - set_pm_event(i, - pmc_cntrl[next_hdw_thread][i].evnts, - pmc_cntrl[next_hdw_thread][i].masks); - - /* - * The following is done only once per each node, but - * we need cpu #, not node #, to pass to the cbe_xxx functions. - */ - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - /* - * stop counters, save counter values, restore counts - * for previous thread - */ - cbe_disable_pm(cpu); - cbe_disable_pm_interrupts(cpu); - for (i = 0; i < num_counters; i++) { - per_cpu(pmc_values, cpu + prev_hdw_thread)[i] - = cbe_read_ctr(cpu, i); - - if (per_cpu(pmc_values, cpu + next_hdw_thread)[i] - == 0xFFFFFFFF) - /* If the cntr value is 0xffffffff, we must - * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a - * new interrupt and make sure that we never - * restore the counters to the max value. If - * the counters were restored to the max value, - * they do not increment and no interrupts are - * generated. Hence no more samples will be - * collected on that cpu. - */ - cbe_write_ctr(cpu, i, 0xFFFFFFF0); - else - cbe_write_ctr(cpu, i, - per_cpu(pmc_values, - cpu + - next_hdw_thread)[i]); - } - - /* - * Switch to the other thread. Change the interrupt - * and control regs to be scheduled on the CPU - * corresponding to the thread to execute. - */ - for (i = 0; i < num_counters; i++) { - if (pmc_cntrl[next_hdw_thread][i].enabled) { - /* - * There are some per thread events. - * Must do the set event, enable_cntr - * for each cpu. - */ - enable_ctr(cpu, i, - pm_regs.pm07_cntrl); - } else { - cbe_write_pm07_control(cpu, i, 0); - } - } - - /* Enable interrupts on the CPU thread that is starting */ - cbe_enable_pm_interrupts(cpu, next_hdw_thread, - virt_cntr_inter_mask); - cbe_enable_pm(cpu); - } - - spin_unlock_irqrestore(&cntr_lock, flags); - - mod_timer(&timer_virt_cntr, jiffies + HZ / 10); -} - -static void start_virt_cntrs(void) -{ - timer_setup(&timer_virt_cntr, cell_virtual_cntr, 0); - timer_virt_cntr.expires = jiffies + HZ / 10; - add_timer(&timer_virt_cntr); -} - -static int cell_reg_setup_spu_cycles(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) -{ - spu_cycle_reset = ctr[0].count; - - /* - * Each node will need to make the rtas call to start - * and stop SPU profiling. Get the token once and store it. - */ - spu_rtas_token = rtas_token("ibm,cbe-spu-perftools"); - - if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) { - printk(KERN_ERR - "%s: rtas token ibm,cbe-spu-perftools unknown\n", - __func__); - return -EIO; - } - return 0; -} - -/* Unfortunately, the hardware will only support event profiling - * on one SPU per node at a time. Therefore, we must time slice - * the profiling across all SPUs in the node. Note, we do this - * in parallel for each node. The following routine is called - * periodically based on kernel timer to switch which SPU is - * being monitored in a round robbin fashion. - */ -static void spu_evnt_swap(struct timer_list *unused) -{ - int node; - int cur_phys_spu, nxt_phys_spu, cur_spu_evnt_phys_spu_indx; - unsigned long flags; - int cpu; - int ret; - u32 interrupt_mask; - - - /* enable interrupts on cntr 0 */ - interrupt_mask = CBE_PM_CTR_OVERFLOW_INTR(0); - - hdw_thread = 0; - - /* Make sure spu event interrupt handler and spu event swap - * don't access the counters simultaneously. - */ - spin_lock_irqsave(&cntr_lock, flags); - - cur_spu_evnt_phys_spu_indx = spu_evnt_phys_spu_indx; - - if (++(spu_evnt_phys_spu_indx) == NUM_SPUS_PER_NODE) - spu_evnt_phys_spu_indx = 0; - - pm_signal[0].sub_unit = spu_evnt_phys_spu_indx; - pm_signal[1].sub_unit = spu_evnt_phys_spu_indx; - pm_signal[2].sub_unit = spu_evnt_phys_spu_indx; - - /* switch the SPU being profiled on each node */ - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - node = cbe_cpu_to_node(cpu); - cur_phys_spu = (node * NUM_SPUS_PER_NODE) - + cur_spu_evnt_phys_spu_indx; - nxt_phys_spu = (node * NUM_SPUS_PER_NODE) - + spu_evnt_phys_spu_indx; - - /* - * stop counters, save counter values, restore counts - * for previous physical SPU - */ - cbe_disable_pm(cpu); - cbe_disable_pm_interrupts(cpu); - - spu_pm_cnt[cur_phys_spu] - = cbe_read_ctr(cpu, 0); - - /* restore previous count for the next spu to sample */ - /* NOTE, hardware issue, counter will not start if the - * counter value is at max (0xFFFFFFFF). - */ - if (spu_pm_cnt[nxt_phys_spu] >= 0xFFFFFFFF) - cbe_write_ctr(cpu, 0, 0xFFFFFFF0); - else - cbe_write_ctr(cpu, 0, spu_pm_cnt[nxt_phys_spu]); - - pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); - - /* setup the debug bus measure the one event and - * the two events to route the next SPU's PC on - * the debug bus - */ - ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu), 3); - if (ret) - printk(KERN_ERR "%s: pm_rtas_activate_signals failed, " - "SPU event swap\n", __func__); - - /* clear the trace buffer, don't want to take PC for - * previous SPU*/ - cbe_write_pm(cpu, trace_address, 0); - - enable_ctr(cpu, 0, pm_regs.pm07_cntrl); - - /* Enable interrupts on the CPU thread that is starting */ - cbe_enable_pm_interrupts(cpu, hdw_thread, - interrupt_mask); - cbe_enable_pm(cpu); - } - - spin_unlock_irqrestore(&cntr_lock, flags); - - /* swap approximately every 0.1 seconds */ - mod_timer(&timer_spu_event_swap, jiffies + HZ / 25); -} - -static void start_spu_event_swap(void) -{ - timer_setup(&timer_spu_event_swap, spu_evnt_swap, 0); - timer_spu_event_swap.expires = jiffies + HZ / 25; - add_timer(&timer_spu_event_swap); -} - -static int cell_reg_setup_spu_events(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) -{ - int i; - - /* routine is called once for all nodes */ - - spu_evnt_phys_spu_indx = 0; - /* - * For all events except PPU CYCLEs, each node will need to make - * the rtas cbe-perftools call to setup and reset the debug bus. - * Make the token lookup call once and store it in the global - * variable pm_rtas_token. - */ - pm_rtas_token = rtas_token("ibm,cbe-perftools"); - - if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { - printk(KERN_ERR - "%s: rtas token ibm,cbe-perftools unknown\n", - __func__); - return -EIO; - } - - /* setup the pm_control register settings, - * settings will be written per node by the - * cell_cpu_setup() function. - */ - pm_regs.pm_cntrl.trace_buf_ovflw = 1; - - /* Use the occurrence trace mode to have SPU PC saved - * to the trace buffer. Occurrence data in trace buffer - * is not used. Bit 2 must be set to store SPU addresses. - */ - pm_regs.pm_cntrl.trace_mode = 2; - - pm_regs.pm_cntrl.spu_addr_trace = 0x1; /* using debug bus - event 2 & 3 */ - - /* setup the debug bus event array with the SPU PC routing events. - * Note, pm_signal[0] will be filled in by set_pm_event() call below. - */ - pm_signal[1].signal_group = SPU_PROFILE_EVENT_ADDR / 100; - pm_signal[1].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_A); - pm_signal[1].bit = SPU_PROFILE_EVENT_ADDR % 100; - pm_signal[1].sub_unit = spu_evnt_phys_spu_indx; - - pm_signal[2].signal_group = SPU_PROFILE_EVENT_ADDR / 100; - pm_signal[2].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_B); - pm_signal[2].bit = SPU_PROFILE_EVENT_ADDR % 100; - pm_signal[2].sub_unit = spu_evnt_phys_spu_indx; - - /* Set the user selected spu event to profile on, - * note, only one SPU profiling event is supported - */ - num_counters = 1; /* Only support one SPU event at a time */ - set_pm_event(0, ctr[0].event, ctr[0].unit_mask); - - reset_value[0] = 0xFFFFFFFF - ctr[0].count; - - /* global, used by cell_cpu_setup */ - ctr_enabled |= 1; - - /* Initialize the count for each SPU to the reset value */ - for (i=0; i < MAX_NUMNODES * NUM_SPUS_PER_NODE; i++) - spu_pm_cnt[i] = reset_value[0]; - - return 0; -} - -static int cell_reg_setup_ppu(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) -{ - /* routine is called once for all nodes */ - int i, j, cpu; - - num_counters = num_ctrs; - - if (unlikely(num_ctrs > NR_PHYS_CTRS)) { - printk(KERN_ERR - "%s: Oprofile, number of specified events " \ - "exceeds number of physical counters\n", - __func__); - return -EIO; - } - - set_count_mode(sys->enable_kernel, sys->enable_user); - - /* Setup the thread 0 events */ - for (i = 0; i < num_ctrs; ++i) { - - pmc_cntrl[0][i].evnts = ctr[i].event; - pmc_cntrl[0][i].masks = ctr[i].unit_mask; - pmc_cntrl[0][i].enabled = ctr[i].enabled; - pmc_cntrl[0][i].vcntr = i; - - for_each_possible_cpu(j) - per_cpu(pmc_values, j)[i] = 0; - } - - /* - * Setup the thread 1 events, map the thread 0 event to the - * equivalent thread 1 event. - */ - for (i = 0; i < num_ctrs; ++i) { - if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111)) - pmc_cntrl[1][i].evnts = ctr[i].event + 19; - else if (ctr[i].event == 2203) - pmc_cntrl[1][i].evnts = ctr[i].event; - else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215)) - pmc_cntrl[1][i].evnts = ctr[i].event + 16; - else - pmc_cntrl[1][i].evnts = ctr[i].event; - - pmc_cntrl[1][i].masks = ctr[i].unit_mask; - pmc_cntrl[1][i].enabled = ctr[i].enabled; - pmc_cntrl[1][i].vcntr = i; - } - - for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) - input_bus[i] = 0xff; - - /* - * Our counters count up, and "count" refers to - * how much before the next interrupt, and we interrupt - * on overflow. So we calculate the starting value - * which will give us "count" until overflow. - * Then we set the events on the enabled counters. - */ - for (i = 0; i < num_counters; ++i) { - /* start with virtual counter set 0 */ - if (pmc_cntrl[0][i].enabled) { - /* Using 32bit counters, reset max - count */ - reset_value[i] = 0xFFFFFFFF - ctr[i].count; - set_pm_event(i, - pmc_cntrl[0][i].evnts, - pmc_cntrl[0][i].masks); - - /* global, used by cell_cpu_setup */ - ctr_enabled |= (1 << i); - } - } - - /* initialize the previous counts for the virtual cntrs */ - for_each_online_cpu(cpu) - for (i = 0; i < num_counters; ++i) { - per_cpu(pmc_values, cpu)[i] = reset_value[i]; - } - - return 0; -} - - -/* This function is called once for all cpus combined */ -static int cell_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) -{ - int ret=0; - spu_cycle_reset = 0; - - /* initialize the spu_arr_trace value, will be reset if - * doing spu event profiling. - */ - pm_regs.group_control = 0; - pm_regs.debug_bus_control = 0; - pm_regs.pm_cntrl.stop_at_max = 1; - pm_regs.pm_cntrl.trace_mode = 0; - pm_regs.pm_cntrl.freeze = 1; - pm_regs.pm_cntrl.trace_buf_ovflw = 0; - pm_regs.pm_cntrl.spu_addr_trace = 0; - - /* - * For all events except PPU CYCLEs, each node will need to make - * the rtas cbe-perftools call to setup and reset the debug bus. - * Make the token lookup call once and store it in the global - * variable pm_rtas_token. - */ - pm_rtas_token = rtas_token("ibm,cbe-perftools"); - - if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { - printk(KERN_ERR - "%s: rtas token ibm,cbe-perftools unknown\n", - __func__); - return -EIO; - } - - if (ctr[0].event == SPU_CYCLES_EVENT_NUM) { - profiling_mode = SPU_PROFILING_CYCLES; - ret = cell_reg_setup_spu_cycles(ctr, sys, num_ctrs); - } else if ((ctr[0].event >= SPU_EVENT_NUM_START) && - (ctr[0].event <= SPU_EVENT_NUM_STOP)) { - profiling_mode = SPU_PROFILING_EVENTS; - spu_cycle_reset = ctr[0].count; - - /* for SPU event profiling, need to setup the - * pm_signal array with the events to route the - * SPU PC before making the FW call. Note, only - * one SPU event for profiling can be specified - * at a time. - */ - cell_reg_setup_spu_events(ctr, sys, num_ctrs); - } else { - profiling_mode = PPU_PROFILING; - ret = cell_reg_setup_ppu(ctr, sys, num_ctrs); - } - - return ret; -} - - - -/* This function is called once for each cpu */ -static int cell_cpu_setup(struct op_counter_config *cntr) -{ - u32 cpu = smp_processor_id(); - u32 num_enabled = 0; - int i; - int ret; - - /* Cycle based SPU profiling does not use the performance - * counters. The trace array is configured to collect - * the data. - */ - if (profiling_mode == SPU_PROFILING_CYCLES) - return 0; - - /* There is one performance monitor per processor chip (i.e. node), - * so we only need to perform this function once per node. - */ - if (cbe_get_hw_thread_id(cpu)) - return 0; - - /* Stop all counters */ - cbe_disable_pm(cpu); - cbe_disable_pm_interrupts(cpu); - - cbe_write_pm(cpu, pm_start_stop, 0); - cbe_write_pm(cpu, group_control, pm_regs.group_control); - cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); - write_pm_cntrl(cpu); - - for (i = 0; i < num_counters; ++i) { - if (ctr_enabled & (1 << i)) { - pm_signal[num_enabled].cpu = cbe_cpu_to_node(cpu); - num_enabled++; - } - } - - /* - * The pm_rtas_activate_signals will return -EIO if the FW - * call failed. - */ - if (profiling_mode == SPU_PROFILING_EVENTS) { - /* For SPU event profiling also need to setup the - * pm interval timer - */ - ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu), - num_enabled+2); - /* store PC from debug bus to Trace buffer as often - * as possible (every 10 cycles) - */ - cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC); - return ret; - } else - return pm_rtas_activate_signals(cbe_cpu_to_node(cpu), - num_enabled); -} - -#define ENTRIES 303 -#define MAXLFSR 0xFFFFFF - -/* precomputed table of 24 bit LFSR values */ -static int initial_lfsr[] = { - 8221349, 12579195, 5379618, 10097839, 7512963, 7519310, 3955098, 10753424, - 15507573, 7458917, 285419, 2641121, 9780088, 3915503, 6668768, 1548716, - 4885000, 8774424, 9650099, 2044357, 2304411, 9326253, 10332526, 4421547, - 3440748, 10179459, 13332843, 10375561, 1313462, 8375100, 5198480, 6071392, - 9341783, 1526887, 3985002, 1439429, 13923762, 7010104, 11969769, 4547026, - 2040072, 4025602, 3437678, 7939992, 11444177, 4496094, 9803157, 10745556, - 3671780, 4257846, 5662259, 13196905, 3237343, 12077182, 16222879, 7587769, - 14706824, 2184640, 12591135, 10420257, 7406075, 3648978, 11042541, 15906893, - 11914928, 4732944, 10695697, 12928164, 11980531, 4430912, 11939291, 2917017, - 6119256, 4172004, 9373765, 8410071, 14788383, 5047459, 5474428, 1737756, - 15967514, 13351758, 6691285, 8034329, 2856544, 14394753, 11310160, 12149558, - 7487528, 7542781, 15668898, 12525138, 12790975, 3707933, 9106617, 1965401, - 16219109, 12801644, 2443203, 4909502, 8762329, 3120803, 6360315, 9309720, - 15164599, 10844842, 4456529, 6667610, 14924259, 884312, 6234963, 3326042, - 15973422, 13919464, 5272099, 6414643, 3909029, 2764324, 5237926, 4774955, - 10445906, 4955302, 5203726, 10798229, 11443419, 2303395, 333836, 9646934, - 3464726, 4159182, 568492, 995747, 10318756, 13299332, 4836017, 8237783, - 3878992, 2581665, 11394667, 5672745, 14412947, 3159169, 9094251, 16467278, - 8671392, 15230076, 4843545, 7009238, 15504095, 1494895, 9627886, 14485051, - 8304291, 252817, 12421642, 16085736, 4774072, 2456177, 4160695, 15409741, - 4902868, 5793091, 13162925, 16039714, 782255, 11347835, 14884586, 366972, - 16308990, 11913488, 13390465, 2958444, 10340278, 1177858, 1319431, 10426302, - 2868597, 126119, 5784857, 5245324, 10903900, 16436004, 3389013, 1742384, - 14674502, 10279218, 8536112, 10364279, 6877778, 14051163, 1025130, 6072469, - 1988305, 8354440, 8216060, 16342977, 13112639, 3976679, 5913576, 8816697, - 6879995, 14043764, 3339515, 9364420, 15808858, 12261651, 2141560, 5636398, - 10345425, 10414756, 781725, 6155650, 4746914, 5078683, 7469001, 6799140, - 10156444, 9667150, 10116470, 4133858, 2121972, 1124204, 1003577, 1611214, - 14304602, 16221850, 13878465, 13577744, 3629235, 8772583, 10881308, 2410386, - 7300044, 5378855, 9301235, 12755149, 4977682, 8083074, 10327581, 6395087, - 9155434, 15501696, 7514362, 14520507, 15808945, 3244584, 4741962, 9658130, - 14336147, 8654727, 7969093, 15759799, 14029445, 5038459, 9894848, 8659300, - 13699287, 8834306, 10712885, 14753895, 10410465, 3373251, 309501, 9561475, - 5526688, 14647426, 14209836, 5339224, 207299, 14069911, 8722990, 2290950, - 3258216, 12505185, 6007317, 9218111, 14661019, 10537428, 11731949, 9027003, - 6641507, 9490160, 200241, 9720425, 16277895, 10816638, 1554761, 10431375, - 7467528, 6790302, 3429078, 14633753, 14428997, 11463204, 3576212, 2003426, - 6123687, 820520, 9992513, 15784513, 5778891, 6428165, 8388607 -}; - -/* - * The hardware uses an LFSR counting sequence to determine when to capture - * the SPU PCs. An LFSR sequence is like a puesdo random number sequence - * where each number occurs once in the sequence but the sequence is not in - * numerical order. The SPU PC capture is done when the LFSR sequence reaches - * the last value in the sequence. Hence the user specified value N - * corresponds to the LFSR number that is N from the end of the sequence. - * - * To avoid the time to compute the LFSR, a lookup table is used. The 24 bit - * LFSR sequence is broken into four ranges. The spacing of the precomputed - * values is adjusted in each range so the error between the user specified - * number (N) of events between samples and the actual number of events based - * on the precomputed value will be les then about 6.2%. Note, if the user - * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used. - * This is to prevent the loss of samples because the trace buffer is full. - * - * User specified N Step between Index in - * precomputed values precomputed - * table - * 0 to 2^16-1 ---- 0 - * 2^16 to 2^16+2^19-1 2^12 1 to 128 - * 2^16+2^19 to 2^16+2^19+2^22-1 2^15 129 to 256 - * 2^16+2^19+2^22 to 2^24-1 2^18 257 to 302 - * - * - * For example, the LFSR values in the second range are computed for 2^16, - * 2^16+2^12, ... , 2^19-2^16, 2^19 and stored in the table at indicies - * 1, 2,..., 127, 128. - * - * The 24 bit LFSR value for the nth number in the sequence can be - * calculated using the following code: - * - * #define size 24 - * int calculate_lfsr(int n) - * { - * int i; - * unsigned int newlfsr0; - * unsigned int lfsr = 0xFFFFFF; - * unsigned int howmany = n; - * - * for (i = 2; i < howmany + 2; i++) { - * newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^ - * ((lfsr >> (size - 1 - 1)) & 1) ^ - * (((lfsr >> (size - 1 - 6)) & 1) ^ - * ((lfsr >> (size - 1 - 23)) & 1))); - * - * lfsr >>= 1; - * lfsr = lfsr | (newlfsr0 << (size - 1)); - * } - * return lfsr; - * } - */ - -#define V2_16 (0x1 << 16) -#define V2_19 (0x1 << 19) -#define V2_22 (0x1 << 22) - -static int calculate_lfsr(int n) -{ - /* - * The ranges and steps are in powers of 2 so the calculations - * can be done using shifts rather then divide. - */ - int index; - - if ((n >> 16) == 0) - index = 0; - else if (((n - V2_16) >> 19) == 0) - index = ((n - V2_16) >> 12) + 1; - else if (((n - V2_16 - V2_19) >> 22) == 0) - index = ((n - V2_16 - V2_19) >> 15 ) + 1 + 128; - else if (((n - V2_16 - V2_19 - V2_22) >> 24) == 0) - index = ((n - V2_16 - V2_19 - V2_22) >> 18 ) + 1 + 256; - else - index = ENTRIES-1; - - /* make sure index is valid */ - if ((index >= ENTRIES) || (index < 0)) - index = ENTRIES-1; - - return initial_lfsr[index]; -} - -static int pm_rtas_activate_spu_profiling(u32 node) -{ - int ret, i; - struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; - - /* - * Set up the rtas call to configure the debug bus to - * route the SPU PCs. Setup the pm_signal for each SPU - */ - for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) { - pm_signal_local[i].cpu = node; - pm_signal_local[i].signal_group = 41; - /* spu i on word (i/2) */ - pm_signal_local[i].bus_word = 1 << i / 2; - /* spu i */ - pm_signal_local[i].sub_unit = i; - pm_signal_local[i].bit = 63; - } - - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, - PASSTHRU_ENABLE, pm_signal_local, - (ARRAY_SIZE(pm_signal_local) - * sizeof(struct pm_signal))); - - if (unlikely(ret)) { - printk(KERN_WARNING "%s: rtas returned: %d\n", - __func__, ret); - return -EIO; - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -static int -oprof_cpufreq_notify(struct notifier_block *nb, unsigned long val, void *data) -{ - int ret = 0; - struct cpufreq_freqs *frq = data; - if ((val == CPUFREQ_PRECHANGE && frq->old < frq->new) || - (val == CPUFREQ_POSTCHANGE && frq->old > frq->new)) - set_spu_profiling_frequency(frq->new, spu_cycle_reset); - return ret; -} - -static struct notifier_block cpu_freq_notifier_block = { - .notifier_call = oprof_cpufreq_notify -}; -#endif - -/* - * Note the generic OProfile stop calls do not support returning - * an error on stop. Hence, will not return an error if the FW - * calls fail on stop. Failure to reset the debug bus is not an issue. - * Failure to disable the SPU profiling is not an issue. The FW calls - * to enable the performance counters and debug bus will work even if - * the hardware was not cleanly reset. - */ -static void cell_global_stop_spu_cycles(void) -{ - int subfunc, rtn_value; - unsigned int lfsr_value; - int cpu; - - oprofile_running = 0; - smp_wmb(); - -#ifdef CONFIG_CPU_FREQ - cpufreq_unregister_notifier(&cpu_freq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); -#endif - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - subfunc = 3; /* - * 2 - activate SPU tracing, - * 3 - deactivate - */ - lfsr_value = 0x8f100000; - - rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL, - subfunc, cbe_cpu_to_node(cpu), - lfsr_value); - - if (unlikely(rtn_value != 0)) { - printk(KERN_ERR - "%s: rtas call ibm,cbe-spu-perftools " \ - "failed, return = %d\n", - __func__, rtn_value); - } - - /* Deactivate the signals */ - pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); - } - - stop_spu_profiling_cycles(); -} - -static void cell_global_stop_spu_events(void) -{ - int cpu; - oprofile_running = 0; - - stop_spu_profiling_events(); - smp_wmb(); - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - cbe_sync_irq(cbe_cpu_to_node(cpu)); - /* Stop the counters */ - cbe_disable_pm(cpu); - cbe_write_pm07_control(cpu, 0, 0); - - /* Deactivate the signals */ - pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); - - /* Deactivate interrupts */ - cbe_disable_pm_interrupts(cpu); - } - del_timer_sync(&timer_spu_event_swap); -} - -static void cell_global_stop_ppu(void) -{ - int cpu; - - /* - * This routine will be called once for the system. - * There is one performance monitor per node, so we - * only need to perform this function once per node. - */ - del_timer_sync(&timer_virt_cntr); - oprofile_running = 0; - smp_wmb(); - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - cbe_sync_irq(cbe_cpu_to_node(cpu)); - /* Stop the counters */ - cbe_disable_pm(cpu); - - /* Deactivate the signals */ - pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); - - /* Deactivate interrupts */ - cbe_disable_pm_interrupts(cpu); - } -} - -static void cell_global_stop(void) -{ - if (profiling_mode == PPU_PROFILING) - cell_global_stop_ppu(); - else if (profiling_mode == SPU_PROFILING_EVENTS) - cell_global_stop_spu_events(); - else - cell_global_stop_spu_cycles(); -} - -static int cell_global_start_spu_cycles(struct op_counter_config *ctr) -{ - int subfunc; - unsigned int lfsr_value; - int cpu; - int ret; - int rtas_error; - unsigned int cpu_khzfreq = 0; - - /* The SPU profiling uses time-based profiling based on - * cpu frequency, so if configured with the CPU_FREQ - * option, we should detect frequency changes and react - * accordingly. - */ -#ifdef CONFIG_CPU_FREQ - ret = cpufreq_register_notifier(&cpu_freq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (ret < 0) - /* this is not a fatal error */ - printk(KERN_ERR "CPU freq change registration failed: %d\n", - ret); - - else - cpu_khzfreq = cpufreq_quick_get(smp_processor_id()); -#endif - - set_spu_profiling_frequency(cpu_khzfreq, spu_cycle_reset); - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - /* - * Setup SPU cycle-based profiling. - * Set perf_mon_control bit 0 to a zero before - * enabling spu collection hardware. - */ - cbe_write_pm(cpu, pm_control, 0); - - if (spu_cycle_reset > MAX_SPU_COUNT) - /* use largest possible value */ - lfsr_value = calculate_lfsr(MAX_SPU_COUNT-1); - else - lfsr_value = calculate_lfsr(spu_cycle_reset); - - /* must use a non zero value. Zero disables data collection. */ - if (lfsr_value == 0) - lfsr_value = calculate_lfsr(1); - - lfsr_value = lfsr_value << 8; /* shift lfsr to correct - * register location - */ - - /* debug bus setup */ - ret = pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu)); - - if (unlikely(ret)) { - rtas_error = ret; - goto out; - } - - - subfunc = 2; /* 2 - activate SPU tracing, 3 - deactivate */ - - /* start profiling */ - ret = rtas_call(spu_rtas_token, 3, 1, NULL, subfunc, - cbe_cpu_to_node(cpu), lfsr_value); - - if (unlikely(ret != 0)) { - printk(KERN_ERR - "%s: rtas call ibm,cbe-spu-perftools failed, " \ - "return = %d\n", __func__, ret); - rtas_error = -EIO; - goto out; - } - } - - rtas_error = start_spu_profiling_cycles(spu_cycle_reset); - if (rtas_error) - goto out_stop; - - oprofile_running = 1; - return 0; - -out_stop: - cell_global_stop_spu_cycles(); /* clean up the PMU/debug bus */ -out: - return rtas_error; -} - -static int cell_global_start_spu_events(struct op_counter_config *ctr) -{ - int cpu; - u32 interrupt_mask = 0; - int rtn = 0; - - hdw_thread = 0; - - /* spu event profiling, uses the performance counters to generate - * an interrupt. The hardware is setup to store the SPU program - * counter into the trace array. The occurrence mode is used to - * enable storing data to the trace buffer. The bits are set - * to send/store the SPU address in the trace buffer. The debug - * bus must be setup to route the SPU program counter onto the - * debug bus. The occurrence data in the trace buffer is not used. - */ - - /* This routine gets called once for the system. - * There is one performance monitor per node, so we - * only need to perform this function once per node. - */ - - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - /* - * Setup SPU event-based profiling. - * Set perf_mon_control bit 0 to a zero before - * enabling spu collection hardware. - * - * Only support one SPU event on one SPU per node. - */ - if (ctr_enabled & 1) { - cbe_write_ctr(cpu, 0, reset_value[0]); - enable_ctr(cpu, 0, pm_regs.pm07_cntrl); - interrupt_mask |= - CBE_PM_CTR_OVERFLOW_INTR(0); - } else { - /* Disable counter */ - cbe_write_pm07_control(cpu, 0, 0); - } - - cbe_get_and_clear_pm_interrupts(cpu); - cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); - cbe_enable_pm(cpu); - - /* clear the trace buffer */ - cbe_write_pm(cpu, trace_address, 0); - } - - /* Start the timer to time slice collecting the event profile - * on each of the SPUs. Note, can collect profile on one SPU - * per node at a time. - */ - start_spu_event_swap(); - start_spu_profiling_events(); - oprofile_running = 1; - smp_wmb(); - - return rtn; -} - -static int cell_global_start_ppu(struct op_counter_config *ctr) -{ - u32 cpu, i; - u32 interrupt_mask = 0; - - /* This routine gets called once for the system. - * There is one performance monitor per node, so we - * only need to perform this function once per node. - */ - for_each_online_cpu(cpu) { - if (cbe_get_hw_thread_id(cpu)) - continue; - - interrupt_mask = 0; - - for (i = 0; i < num_counters; ++i) { - if (ctr_enabled & (1 << i)) { - cbe_write_ctr(cpu, i, reset_value[i]); - enable_ctr(cpu, i, pm_regs.pm07_cntrl); - interrupt_mask |= CBE_PM_CTR_OVERFLOW_INTR(i); - } else { - /* Disable counter */ - cbe_write_pm07_control(cpu, i, 0); - } - } - - cbe_get_and_clear_pm_interrupts(cpu); - cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); - cbe_enable_pm(cpu); - } - - virt_cntr_inter_mask = interrupt_mask; - oprofile_running = 1; - smp_wmb(); - - /* - * NOTE: start_virt_cntrs will result in cell_virtual_cntr() being - * executed which manipulates the PMU. We start the "virtual counter" - * here so that we do not need to synchronize access to the PMU in - * the above for-loop. - */ - start_virt_cntrs(); - - return 0; -} - -static int cell_global_start(struct op_counter_config *ctr) -{ - if (profiling_mode == SPU_PROFILING_CYCLES) - return cell_global_start_spu_cycles(ctr); - else if (profiling_mode == SPU_PROFILING_EVENTS) - return cell_global_start_spu_events(ctr); - else - return cell_global_start_ppu(ctr); -} - - -/* The SPU interrupt handler - * - * SPU event profiling works as follows: - * The pm_signal[0] holds the one SPU event to be measured. It is routed on - * the debug bus using word 0 or 1. The value of pm_signal[1] and - * pm_signal[2] contain the necessary events to route the SPU program - * counter for the selected SPU onto the debug bus using words 2 and 3. - * The pm_interval register is setup to write the SPU PC value into the - * trace buffer at the maximum rate possible. The trace buffer is configured - * to store the PCs, wrapping when it is full. The performance counter is - * initialized to the max hardware count minus the number of events, N, between - * samples. Once the N events have occurred, a HW counter overflow occurs - * causing the generation of a HW counter interrupt which also stops the - * writing of the SPU PC values to the trace buffer. Hence the last PC - * written to the trace buffer is the SPU PC that we want. Unfortunately, - * we have to read from the beginning of the trace buffer to get to the - * last value written. We just hope the PPU has nothing better to do then - * service this interrupt. The PC for the specific SPU being profiled is - * extracted from the trace buffer processed and stored. The trace buffer - * is cleared, interrupts are cleared, the counter is reset to max - N. - * A kernel timer is used to periodically call the routine spu_evnt_swap() - * to switch to the next physical SPU in the node to profile in round robbin - * order. This way data is collected for all SPUs on the node. It does mean - * that we need to use a relatively small value of N to ensure enough samples - * on each SPU are collected each SPU is being profiled 1/8 of the time. - * It may also be necessary to use a longer sample collection period. - */ -static void cell_handle_interrupt_spu(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - u32 cpu, cpu_tmp; - u64 trace_entry; - u32 interrupt_mask; - u64 trace_buffer[2]; - u64 last_trace_buffer; - u32 sample; - u32 trace_addr; - unsigned long sample_array_lock_flags; - int spu_num; - unsigned long flags; - - /* Make sure spu event interrupt handler and spu event swap - * don't access the counters simultaneously. - */ - cpu = smp_processor_id(); - spin_lock_irqsave(&cntr_lock, flags); - - cpu_tmp = cpu; - cbe_disable_pm(cpu); - - interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); - - sample = 0xABCDEF; - trace_entry = 0xfedcba; - last_trace_buffer = 0xdeadbeaf; - - if ((oprofile_running == 1) && (interrupt_mask != 0)) { - /* disable writes to trace buff */ - cbe_write_pm(cpu, pm_interval, 0); - - /* only have one perf cntr being used, cntr 0 */ - if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(0)) - && ctr[0].enabled) - /* The SPU PC values will be read - * from the trace buffer, reset counter - */ - - cbe_write_ctr(cpu, 0, reset_value[0]); - - trace_addr = cbe_read_pm(cpu, trace_address); - - while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) { - /* There is data in the trace buffer to process - * Read the buffer until you get to the last - * entry. This is the value we want. - */ - - cbe_read_trace_buffer(cpu, trace_buffer); - trace_addr = cbe_read_pm(cpu, trace_address); - } - - /* SPU Address 16 bit count format for 128 bit - * HW trace buffer is used for the SPU PC storage - * HDR bits 0:15 - * SPU Addr 0 bits 16:31 - * SPU Addr 1 bits 32:47 - * unused bits 48:127 - * - * HDR: bit4 = 1 SPU Address 0 valid - * HDR: bit5 = 1 SPU Address 1 valid - * - unfortunately, the valid bits don't seem to work - * - * Note trace_buffer[0] holds bits 0:63 of the HW - * trace buffer, trace_buffer[1] holds bits 64:127 - */ - - trace_entry = trace_buffer[0] - & 0x00000000FFFF0000; - - /* only top 16 of the 18 bit SPU PC address - * is stored in trace buffer, hence shift right - * by 16 -2 bits */ - sample = trace_entry >> 14; - last_trace_buffer = trace_buffer[0]; - - spu_num = spu_evnt_phys_spu_indx - + (cbe_cpu_to_node(cpu) * NUM_SPUS_PER_NODE); - - /* make sure only one process at a time is calling - * spu_sync_buffer() - */ - spin_lock_irqsave(&oprof_spu_smpl_arry_lck, - sample_array_lock_flags); - spu_sync_buffer(spu_num, &sample, 1); - spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck, - sample_array_lock_flags); - - smp_wmb(); /* insure spu event buffer updates are written - * don't want events intermingled... */ - - /* The counters were frozen by the interrupt. - * Reenable the interrupt and restart the counters. - */ - cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC); - cbe_enable_pm_interrupts(cpu, hdw_thread, - virt_cntr_inter_mask); - - /* clear the trace buffer, re-enable writes to trace buff */ - cbe_write_pm(cpu, trace_address, 0); - cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC); - - /* The writes to the various performance counters only writes - * to a latch. The new values (interrupt setting bits, reset - * counter value etc.) are not copied to the actual registers - * until the performance monitor is enabled. In order to get - * this to work as desired, the performance monitor needs to - * be disabled while writing to the latches. This is a - * HW design issue. - */ - write_pm_cntrl(cpu); - cbe_enable_pm(cpu); - } - spin_unlock_irqrestore(&cntr_lock, flags); -} - -static void cell_handle_interrupt_ppu(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - u32 cpu; - u64 pc; - int is_kernel; - unsigned long flags = 0; - u32 interrupt_mask; - int i; - - cpu = smp_processor_id(); - - /* - * Need to make sure the interrupt handler and the virt counter - * routine are not running at the same time. See the - * cell_virtual_cntr() routine for additional comments. - */ - spin_lock_irqsave(&cntr_lock, flags); - - /* - * Need to disable and reenable the performance counters - * to get the desired behavior from the hardware. This - * is hardware specific. - */ - - cbe_disable_pm(cpu); - - interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); - - /* - * If the interrupt mask has been cleared, then the virt cntr - * has cleared the interrupt. When the thread that generated - * the interrupt is restored, the data count will be restored to - * 0xffffff0 to cause the interrupt to be regenerated. - */ - - if ((oprofile_running == 1) && (interrupt_mask != 0)) { - pc = regs->nip; - is_kernel = is_kernel_addr(pc); - - for (i = 0; i < num_counters; ++i) { - if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) - && ctr[i].enabled) { - oprofile_add_ext_sample(pc, regs, i, is_kernel); - cbe_write_ctr(cpu, i, reset_value[i]); - } - } - - /* - * The counters were frozen by the interrupt. - * Reenable the interrupt and restart the counters. - * If there was a race between the interrupt handler and - * the virtual counter routine. The virtual counter - * routine may have cleared the interrupts. Hence must - * use the virt_cntr_inter_mask to re-enable the interrupts. - */ - cbe_enable_pm_interrupts(cpu, hdw_thread, - virt_cntr_inter_mask); - - /* - * The writes to the various performance counters only writes - * to a latch. The new values (interrupt setting bits, reset - * counter value etc.) are not copied to the actual registers - * until the performance monitor is enabled. In order to get - * this to work as desired, the performance monitor needs to - * be disabled while writing to the latches. This is a - * HW design issue. - */ - cbe_enable_pm(cpu); - } - spin_unlock_irqrestore(&cntr_lock, flags); -} - -static void cell_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - if (profiling_mode == PPU_PROFILING) - cell_handle_interrupt_ppu(regs, ctr); - else - cell_handle_interrupt_spu(regs, ctr); -} - -/* - * This function is called from the generic OProfile - * driver. When profiling PPUs, we need to do the - * generic sync start; otherwise, do spu_sync_start. - */ -static int cell_sync_start(void) -{ - if ((profiling_mode == SPU_PROFILING_CYCLES) || - (profiling_mode == SPU_PROFILING_EVENTS)) - return spu_sync_start(); - else - return DO_GENERIC_SYNC; -} - -static int cell_sync_stop(void) -{ - if ((profiling_mode == SPU_PROFILING_CYCLES) || - (profiling_mode == SPU_PROFILING_EVENTS)) - return spu_sync_stop(); - else - return 1; -} - -struct op_powerpc_model op_model_cell = { - .reg_setup = cell_reg_setup, - .cpu_setup = cell_cpu_setup, - .global_start = cell_global_start, - .global_stop = cell_global_stop, - .sync_start = cell_sync_start, - .sync_stop = cell_sync_stop, - .handle_interrupt = cell_handle_interrupt, -}; diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c deleted file mode 100644 index 25dc681..0000000 --- a/arch/powerpc/oprofile/op_model_fsl_emb.c +++ /dev/null @@ -1,380 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Freescale Embedded oprofile support, based on ppc64 oprofile support - * Copyright (C) 2004 Anton Blanchard , IBM - * - * Copyright (c) 2004, 2010 Freescale Semiconductor, Inc - * - * Author: Andy Fleming - * Maintainer: Kumar Gala - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int num_counters; -static int oprofile_running; - -static inline u32 get_pmlca(int ctr) -{ - u32 pmlca; - - switch (ctr) { - case 0: - pmlca = mfpmr(PMRN_PMLCA0); - break; - case 1: - pmlca = mfpmr(PMRN_PMLCA1); - break; - case 2: - pmlca = mfpmr(PMRN_PMLCA2); - break; - case 3: - pmlca = mfpmr(PMRN_PMLCA3); - break; - case 4: - pmlca = mfpmr(PMRN_PMLCA4); - break; - case 5: - pmlca = mfpmr(PMRN_PMLCA5); - break; - default: - panic("Bad ctr number\n"); - } - - return pmlca; -} - -static inline void set_pmlca(int ctr, u32 pmlca) -{ - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - break; - case 4: - mtpmr(PMRN_PMLCA4, pmlca); - break; - case 5: - mtpmr(PMRN_PMLCA5, pmlca); - break; - default: - panic("Bad ctr number\n"); - } -} - -static inline unsigned int ctr_read(unsigned int i) -{ - switch(i) { - case 0: - return mfpmr(PMRN_PMC0); - case 1: - return mfpmr(PMRN_PMC1); - case 2: - return mfpmr(PMRN_PMC2); - case 3: - return mfpmr(PMRN_PMC3); - case 4: - return mfpmr(PMRN_PMC4); - case 5: - return mfpmr(PMRN_PMC5); - default: - return 0; - } -} - -static inline void ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { - case 0: - mtpmr(PMRN_PMC0, val); - break; - case 1: - mtpmr(PMRN_PMC1, val); - break; - case 2: - mtpmr(PMRN_PMC2, val); - break; - case 3: - mtpmr(PMRN_PMC3, val); - break; - case 4: - mtpmr(PMRN_PMC4, val); - break; - case 5: - mtpmr(PMRN_PMC5, val); - break; - default: - break; - } -} - - -static void init_pmc_stop(int ctr) -{ - u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | - PMLCA_FCM1 | PMLCA_FCM0); - u32 pmlcb = 0; - - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - mtpmr(PMRN_PMLCB0, pmlcb); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - mtpmr(PMRN_PMLCB1, pmlcb); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - mtpmr(PMRN_PMLCB2, pmlcb); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - mtpmr(PMRN_PMLCB3, pmlcb); - break; - case 4: - mtpmr(PMRN_PMLCA4, pmlca); - mtpmr(PMRN_PMLCB4, pmlcb); - break; - case 5: - mtpmr(PMRN_PMLCA5, pmlca); - mtpmr(PMRN_PMLCB5, pmlcb); - break; - default: - panic("Bad ctr number!\n"); - } -} - -static void set_pmc_event(int ctr, int event) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - pmlca = (pmlca & ~PMLCA_EVENT_MASK) | - ((event << PMLCA_EVENT_SHIFT) & - PMLCA_EVENT_MASK); - - set_pmlca(ctr, pmlca); -} - -static void set_pmc_user_kernel(int ctr, int user, int kernel) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - if(user) - pmlca &= ~PMLCA_FCU; - else - pmlca |= PMLCA_FCU; - - if(kernel) - pmlca &= ~PMLCA_FCS; - else - pmlca |= PMLCA_FCS; - - set_pmlca(ctr, pmlca); -} - -static void set_pmc_marked(int ctr, int mark0, int mark1) -{ - u32 pmlca = get_pmlca(ctr); - - if(mark0) - pmlca &= ~PMLCA_FCM0; - else - pmlca |= PMLCA_FCM0; - - if(mark1) - pmlca &= ~PMLCA_FCM1; - else - pmlca |= PMLCA_FCM1; - - set_pmlca(ctr, pmlca); -} - -static void pmc_start_ctr(int ctr, int enable) -{ - u32 pmlca = get_pmlca(ctr); - - pmlca &= ~PMLCA_FC; - - if (enable) - pmlca |= PMLCA_CE; - else - pmlca &= ~PMLCA_CE; - - set_pmlca(ctr, pmlca); -} - -static void pmc_start_ctrs(int enable) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 &= ~PMGC0_FAC; - pmgc0 |= PMGC0_FCECE; - - if (enable) - pmgc0 |= PMGC0_PMIE; - else - pmgc0 &= ~PMGC0_PMIE; - - mtpmr(PMRN_PMGC0, pmgc0); -} - -static void pmc_stop_ctrs(void) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 |= PMGC0_FAC; - - pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); - - mtpmr(PMRN_PMGC0, pmgc0); -} - -static int fsl_emb_cpu_setup(struct op_counter_config *ctr) -{ - int i; - - /* freeze all counters */ - pmc_stop_ctrs(); - - for (i = 0;i < num_counters;i++) { - init_pmc_stop(i); - - set_pmc_event(i, ctr[i].event); - - set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); - } - - return 0; -} - -static int fsl_emb_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - num_counters = num_ctrs; - - /* Our counters count up, and "count" refers to - * how much before the next interrupt, and we interrupt - * on overflow. So we calculate the starting value - * which will give us "count" until overflow. - * Then we set the events on the enabled counters */ - for (i = 0; i < num_counters; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - return 0; -} - -static int fsl_emb_start(struct op_counter_config *ctr) -{ - int i; - - mtmsr(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); - /* Set each enabled counter to only - * count when the Mark bit is *not* set */ - set_pmc_marked(i, 1, 0); - pmc_start_ctr(i, 1); - } else { - ctr_write(i, 0); - - /* Set the ctr to be stopped */ - pmc_start_ctr(i, 0); - } - } - - /* Clear the freeze bit, and enable the interrupt. - * The counters won't actually start until the rfi clears - * the PMM bit */ - pmc_start_ctrs(1); - - oprofile_running = 1; - - pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(), - mfpmr(PMRN_PMGC0)); - - return 0; -} - -static void fsl_emb_stop(void) -{ - /* freeze counters */ - pmc_stop_ctrs(); - - oprofile_running = 0; - - pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(), - mfpmr(PMRN_PMGC0)); - - mb(); -} - - -static void fsl_emb_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned long pc; - int is_kernel; - int val; - int i; - - pc = regs->nip; - is_kernel = is_kernel_addr(pc); - - for (i = 0; i < num_counters; ++i) { - val = ctr_read(i); - if (val < 0) { - if (oprofile_running && ctr[i].enabled) { - oprofile_add_ext_sample(pc, regs, i, is_kernel); - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0); - } - } - } - - /* The freeze bit was set by the interrupt. */ - /* Clear the freeze bit, and reenable the interrupt. The - * counters won't actually start until the rfi clears the PMM - * bit. The PMM bit should not be set until after the interrupt - * is cleared to avoid it getting lost in some hypervisor - * environments. - */ - mtmsr(mfmsr() | MSR_PMM); - pmc_start_ctrs(1); -} - -struct op_powerpc_model op_model_fsl_emb = { - .reg_setup = fsl_emb_reg_setup, - .cpu_setup = fsl_emb_cpu_setup, - .start = fsl_emb_start, - .stop = fsl_emb_stop, - .handle_interrupt = fsl_emb_handle_interrupt, -}; diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c deleted file mode 100644 index d23061c..0000000 --- a/arch/powerpc/oprofile/op_model_pa6t.c +++ /dev/null @@ -1,227 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2006-2007 PA Semi, Inc - * - * Author: Shashi Rao, PA Semi - * - * Maintained by: Olof Johansson - * - * Based on arch/powerpc/oprofile/op_model_power4.c - */ - -#include -#include -#include -#include -#include -#include -#include - -static unsigned char oprofile_running; - -/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */ -static u64 mmcr0_val; -static u64 mmcr1_val; - -/* inited in pa6t_reg_setup */ -static u64 reset_value[OP_MAX_COUNTER]; - -static inline u64 ctr_read(unsigned int i) -{ - switch (i) { - case 0: - return mfspr(SPRN_PA6T_PMC0); - case 1: - return mfspr(SPRN_PA6T_PMC1); - case 2: - return mfspr(SPRN_PA6T_PMC2); - case 3: - return mfspr(SPRN_PA6T_PMC3); - case 4: - return mfspr(SPRN_PA6T_PMC4); - case 5: - return mfspr(SPRN_PA6T_PMC5); - default: - printk(KERN_ERR "ctr_read called with bad arg %u\n", i); - return 0; - } -} - -static inline void ctr_write(unsigned int i, u64 val) -{ - switch (i) { - case 0: - mtspr(SPRN_PA6T_PMC0, val); - break; - case 1: - mtspr(SPRN_PA6T_PMC1, val); - break; - case 2: - mtspr(SPRN_PA6T_PMC2, val); - break; - case 3: - mtspr(SPRN_PA6T_PMC3, val); - break; - case 4: - mtspr(SPRN_PA6T_PMC4, val); - break; - case 5: - mtspr(SPRN_PA6T_PMC5, val); - break; - default: - printk(KERN_ERR "ctr_write called with bad arg %u\n", i); - break; - } -} - - -/* precompute the values to stuff in the hardware registers */ -static int pa6t_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int pmc; - - /* - * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the - * event_mappings file by turning off the counters that the user doesn't - * care about - * - * setup user and kernel profiling - */ - for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) - if (!ctr[pmc].enabled) { - sys->mmcr0 &= ~(0x1UL << pmc); - sys->mmcr0 &= ~(0x1UL << (pmc+12)); - pr_debug("turned off counter %u\n", pmc); - } - - if (sys->enable_kernel) - sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN; - else - sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN); - - if (sys->enable_user) - sys->mmcr0 |= PA6T_MMCR0_PREN; - else - sys->mmcr0 &= ~PA6T_MMCR0_PREN; - - /* - * The performance counter event settings are given in the mmcr0 and - * mmcr1 values passed from the user in the op_system_config - * structure (sys variable). - */ - mmcr0_val = sys->mmcr0; - mmcr1_val = sys->mmcr1; - pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0); - pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1); - - for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) { - /* counters are 40 bit. Move to cputable at some point? */ - reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count; - pr_debug("reset_value for pmc%u inited to 0x%llx\n", - pmc, reset_value[pmc]); - } - - return 0; -} - -/* configure registers on this cpu */ -static int pa6t_cpu_setup(struct op_counter_config *ctr) -{ - u64 mmcr0 = mmcr0_val; - u64 mmcr1 = mmcr1_val; - - /* Default is all PMCs off */ - mmcr0 &= ~(0x3FUL); - mtspr(SPRN_PA6T_MMCR0, mmcr0); - - /* program selected programmable events in */ - mtspr(SPRN_PA6T_MMCR1, mmcr1); - - pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(), - mfspr(SPRN_PA6T_MMCR0)); - pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(), - mfspr(SPRN_PA6T_MMCR1)); - - return 0; -} - -static int pa6t_start(struct op_counter_config *ctr) -{ - int i; - - /* Hold off event counting until rfid */ - u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; - - for (i = 0; i < cur_cpu_spec->num_pmcs; i++) - if (ctr[i].enabled) - ctr_write(i, reset_value[i]); - else - ctr_write(i, 0UL); - - mtspr(SPRN_PA6T_MMCR0, mmcr0); - - oprofile_running = 1; - - pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0); - - return 0; -} - -static void pa6t_stop(void) -{ - u64 mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_PA6T_MMCR0); - mmcr0 |= PA6T_MMCR0_FCM0; - mtspr(SPRN_PA6T_MMCR0, mmcr0); - - oprofile_running = 0; - - pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0); -} - -/* handle the perfmon overflow vector */ -static void pa6t_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned long pc = mfspr(SPRN_PA6T_SIAR); - int is_kernel = is_kernel_addr(pc); - u64 val; - int i; - u64 mmcr0; - - /* disable perfmon counting until rfid */ - mmcr0 = mfspr(SPRN_PA6T_MMCR0); - mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS); - - /* Record samples. We've got one global bit for whether a sample - * was taken, so add it for any counter that triggered overflow. - */ - for (i = 0; i < cur_cpu_spec->num_pmcs; i++) { - val = ctr_read(i); - if (val & (0x1UL << 39)) { /* Overflow bit set */ - if (oprofile_running && ctr[i].enabled) { - if (mmcr0 & PA6T_MMCR0_SIARLOG) - oprofile_add_ext_sample(pc, regs, i, is_kernel); - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0UL); - } - } - } - - /* Restore mmcr0 to a good known value since the PMI changes it */ - mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; - mtspr(SPRN_PA6T_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_pa6t = { - .reg_setup = pa6t_reg_setup, - .cpu_setup = pa6t_cpu_setup, - .start = pa6t_start, - .stop = pa6t_stop, - .handle_interrupt = pa6t_handle_interrupt, -}; diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c deleted file mode 100644 index 2ae6b86..0000000 --- a/arch/powerpc/oprofile/op_model_power4.c +++ /dev/null @@ -1,438 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2004 Anton Blanchard , IBM - * Added mmcra[slot] support: - * Copyright (C) 2006-2007 Will Schmidt , IBM - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define dbg(args...) -#define OPROFILE_PM_PMCSEL_MSK 0xffULL -#define OPROFILE_PM_UNIT_SHIFT 60 -#define OPROFILE_PM_UNIT_MSK 0xfULL -#define OPROFILE_MAX_PMC_NUM 3 -#define OPROFILE_PMSEL_FIELD_WIDTH 8 -#define OPROFILE_UNIT_FIELD_WIDTH 4 -#define MMCRA_SIAR_VALID_MASK 0x10000000ULL - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int oprofile_running; -static int use_slot_nums; - -/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ -static u32 mmcr0_val; -static u64 mmcr1_val; -static u64 mmcra_val; -static u32 cntr_marked_events; - -static int power7_marked_instr_event(u64 mmcr1) -{ - u64 psel, unit; - int pmc, cntr_marked_events = 0; - - /* Given the MMCR1 value, look at the field for each counter to - * determine if it is a marked event. Code based on the function - * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c. - */ - for (pmc = 0; pmc < 4; pmc++) { - psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK - << (OPROFILE_MAX_PMC_NUM - pmc) - * OPROFILE_PMSEL_FIELD_WIDTH); - psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc) - * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL; - unit = mmcr1 & (OPROFILE_PM_UNIT_MSK - << (OPROFILE_PM_UNIT_SHIFT - - (pmc * OPROFILE_PMSEL_FIELD_WIDTH ))); - unit = unit >> (OPROFILE_PM_UNIT_SHIFT - - (pmc * OPROFILE_PMSEL_FIELD_WIDTH)); - - switch (psel >> 4) { - case 2: - cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc; - break; - case 3: - if (psel == 0x3c) { - cntr_marked_events |= (pmc == 0) << pmc; - break; - } - - if (psel == 0x3e) { - cntr_marked_events |= (pmc != 1) << pmc; - break; - } - - cntr_marked_events |= 1 << pmc; - break; - case 4: - case 5: - cntr_marked_events |= (unit == 0xd) << pmc; - break; - case 6: - if (psel == 0x64) - cntr_marked_events |= (pmc >= 2) << pmc; - break; - case 8: - cntr_marked_events |= (unit == 0xd) << pmc; - break; - } - } - return cntr_marked_events; -} - -static int power4_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - /* - * The performance counter event settings are given in the mmcr0, - * mmcr1 and mmcra values passed from the user in the - * op_system_config structure (sys variable). - */ - mmcr0_val = sys->mmcr0; - mmcr1_val = sys->mmcr1; - mmcra_val = sys->mmcra; - - /* Power 7+ and newer architectures: - * Determine which counter events in the group (the group of events is - * specified by the bit settings in the MMCR1 register) are marked - * events for use in the interrupt handler. Do the calculation once - * before OProfile starts. Information is used in the interrupt - * handler. Starting with Power 7+ we only record the sample for - * marked events if the SIAR valid bit is set. For non marked events - * the sample is always recorded. - */ - if (pvr_version_is(PVR_POWER7p)) - cntr_marked_events = power7_marked_instr_event(mmcr1_val); - else - cntr_marked_events = 0; /* For older processors, set the bit map - * to zero so the sample will always be - * be recorded. - */ - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* setup user and kernel profiling */ - if (sys->enable_kernel) - mmcr0_val &= ~MMCR0_KERNEL_DISABLE; - else - mmcr0_val |= MMCR0_KERNEL_DISABLE; - - if (sys->enable_user) - mmcr0_val &= ~MMCR0_PROBLEM_DISABLE; - else - mmcr0_val |= MMCR0_PROBLEM_DISABLE; - - if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) || - pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) || - pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) || - pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p)) - use_slot_nums = 1; - - return 0; -} - -extern void ppc_enable_pmcs(void); - -/* - * Older CPUs require the MMCRA sample bit to be always set, but newer - * CPUs only want it set for some groups. Eventually we will remove all - * knowledge of this bit in the kernel, oprofile userspace should be - * setting it when required. - * - * In order to keep current installations working we force the bit for - * those older CPUs. Once everyone has updated their oprofile userspace we - * can remove this hack. - */ -static inline int mmcra_must_set_sample(void) -{ - if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) || - pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) || - pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX)) - return 1; - - return 0; -} - -static int power4_cpu_setup(struct op_counter_config *ctr) -{ - unsigned int mmcr0 = mmcr0_val; - unsigned long mmcra = mmcra_val; - - ppc_enable_pmcs(); - - /* set the freeze bit */ - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; - mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; - mtspr(SPRN_MMCR0, mmcr0); - - mtspr(SPRN_MMCR1, mmcr1_val); - - if (mmcra_must_set_sample()) - mmcra |= MMCRA_SAMPLE_ENABLE; - mtspr(SPRN_MMCRA, mmcra); - - dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR0)); - dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR1)); - dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(), - mfspr(SPRN_MMCRA)); - - return 0; -} - -static int power4_start(struct op_counter_config *ctr) -{ - int i; - unsigned int mmcr0; - - /* set the PMM bit (see comment below) */ - mtmsr(mfmsr() | MSR_PMM); - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { - if (ctr[i].enabled) { - classic_ctr_write(i, reset_value[i]); - } else { - classic_ctr_write(i, 0); - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* - * We must clear the PMAO bit on some (GQ) chips. Just do it - * all the time - */ - mmcr0 &= ~MMCR0_PMAO; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this excetion, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - oprofile_running = 1; - - dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - return 0; -} - -static void power4_stop(void) -{ - unsigned int mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_MMCR0); - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - oprofile_running = 0; - - dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - - mb(); -} - -/* Fake functions used by canonicalize_pc */ -static void __used hypervisor_bucket(void) -{ -} - -static void __used rtas_bucket(void) -{ -} - -static void __used kernel_unknown_bucket(void) -{ -} - -/* - * On GQ and newer the MMCRA stores the HV and PR bits at the time - * the SIAR was sampled. We use that to work out if the SIAR was sampled in - * the hypervisor, our exception vectors or RTAS. - * If the MMCRA_SAMPLE_ENABLE bit is set, we can use the MMCRA[slot] bits - * to more accurately identify the address of the sampled instruction. The - * mmcra[slot] bits represent the slot number of a sampled instruction - * within an instruction group. The slot will contain a value between 1 - * and 5 if MMCRA_SAMPLE_ENABLE is set, otherwise 0. - */ -static unsigned long get_pc(struct pt_regs *regs) -{ - unsigned long pc = mfspr(SPRN_SIAR); - unsigned long mmcra; - unsigned long slot; - - /* Can't do much about it */ - if (!cur_cpu_spec->oprofile_mmcra_sihv) - return pc; - - mmcra = mfspr(SPRN_MMCRA); - - if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) { - slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT); - if (slot > 1) - pc += 4 * (slot - 1); - } - - /* Were we in the hypervisor? */ - if (firmware_has_feature(FW_FEATURE_LPAR) && - (mmcra & cur_cpu_spec->oprofile_mmcra_sihv)) - /* function descriptor madness */ - return *((unsigned long *)hypervisor_bucket); - - /* We were in userspace, nothing to do */ - if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr) - return pc; - -#ifdef CONFIG_PPC_RTAS - /* Were we in RTAS? */ - if (pc >= rtas.base && pc < (rtas.base + rtas.size)) - /* function descriptor madness */ - return *((unsigned long *)rtas_bucket); -#endif - - /* Were we in our exception vectors or SLB real mode miss handler? */ - if (pc < 0x1000000UL) - return (unsigned long)__va(pc); - - /* Not sure where we were */ - if (!is_kernel_addr(pc)) - /* function descriptor madness */ - return *((unsigned long *)kernel_unknown_bucket); - - return pc; -} - -static int get_kernel(unsigned long pc, unsigned long mmcra) -{ - int is_kernel; - - if (!cur_cpu_spec->oprofile_mmcra_sihv) { - is_kernel = is_kernel_addr(pc); - } else { - is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0); - } - - return is_kernel; -} - -static bool pmc_overflow(unsigned long val) -{ - if ((int)val < 0) - return true; - - /* - * Events on POWER7 can roll back if a speculative event doesn't - * eventually complete. Unfortunately in some rare cases they will - * raise a performance monitor exception. We need to catch this to - * ensure we reset the PMC. In all cases the PMC will be 256 or less - * cycles from overflow. - * - * We only do this if the first pass fails to find any overflowing - * PMCs because a user might set a period of less than 256 and we - * don't want to mistakenly reset them. - */ - if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256)) - return true; - - return false; -} - -static void power4_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned long pc; - int is_kernel; - int val; - int i; - unsigned int mmcr0; - unsigned long mmcra; - bool siar_valid = false; - - mmcra = mfspr(SPRN_MMCRA); - - pc = get_pc(regs); - is_kernel = get_kernel(pc, mmcra); - - /* set the PMM bit (see comment below) */ - mtmsr(mfmsr() | MSR_PMM); - - /* Check that the SIAR valid bit in MMCRA is set to 1. */ - if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK) - siar_valid = true; - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { - val = classic_ctr_read(i); - if (pmc_overflow(val)) { - if (oprofile_running && ctr[i].enabled) { - /* Power 7+ and newer architectures: - * If the event is a marked event, then only - * save the sample if the SIAR valid bit is - * set. If the event is not marked, then - * always save the sample. - * Note, the Sample enable bit in the MMCRA - * register must be set to 1 if the group - * contains a marked event. - */ - if ((siar_valid && - (cntr_marked_events & (1 << i))) - || !(cntr_marked_events & (1 << i))) - oprofile_add_ext_sample(pc, regs, i, - is_kernel); - - classic_ctr_write(i, reset_value[i]); - } else { - classic_ctr_write(i, 0); - } - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* reset the perfmon trigger */ - mmcr0 |= MMCR0_PMXE; - - /* - * We must clear the PMAO bit on some (GQ) chips. Just do it - * all the time - */ - mmcr0 &= ~MMCR0_PMAO; - - /* Clear the appropriate bits in the MMCRA */ - mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear; - mtspr(SPRN_MMCRA, mmcra); - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this exception, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_power4 = { - .reg_setup = power4_reg_setup, - .cpu_setup = power4_cpu_setup, - .start = power4_start, - .stop = power4_stop, - .handle_interrupt = power4_handle_interrupt, -}; -- 2.7.4