From 9843814fc651d590cc5a82488c644ccf70975f16 Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Mon, 17 Jul 2023 10:13:33 +0800 Subject: [PATCH] net: txgbe: change LAN reset mode The old way to do LAN reset is sending reset command to firmware. Once firmware performs reset, it reconfigures what it needs. In the new firmware versions, veto bit is introduced for NCSI/LLDP to block PHY domain in LAN reset. At this point, writing register of LAN reset directly makes the same effect as the old way. And it does not reset MNG domain, so that veto bit does not change. Since veto bit was never used, the old firmware is compatible with the driver before and after this change. The new firmware needs to use with the driver after this change if it wants to implement the new feature, otherwise it is the same as the old firmware. Signed-off-by: Jiawen Wu Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20230717021333.94181-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 65 --------------------------- drivers/net/ethernet/wangxun/libwx/wx_hw.h | 1 - drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 8 ++-- 3 files changed, 4 insertions(+), 70 deletions(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index ad09ab1..f833c84 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -432,71 +432,6 @@ out: EXPORT_SYMBOL(wx_read_ee_hostif_buffer); /** - * wx_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. - **/ -static u8 wx_calculate_checksum(u8 *buffer, u32 length) -{ - u8 sum = 0; - u32 i; - - if (!buffer) - return 0; - - for (i = 0; i < length; i++) - sum += buffer[i]; - - return (u8)(0 - sum); -} - -/** - * wx_reset_hostif - send reset cmd to fw - * @wx: pointer to hardware structure - * - * Sends reset cmd to firmware through the manageability - * block. - **/ -int wx_reset_hostif(struct wx *wx) -{ - struct wx_hic_reset reset_cmd; - int ret_val = 0; - int i; - - reset_cmd.hdr.cmd = FW_RESET_CMD; - reset_cmd.hdr.buf_len = FW_RESET_LEN; - reset_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; - reset_cmd.lan_id = wx->bus.func; - reset_cmd.reset_type = (u16)wx->reset_type; - reset_cmd.hdr.checksum = 0; - reset_cmd.hdr.checksum = wx_calculate_checksum((u8 *)&reset_cmd, - (FW_CEM_HDR_LEN + - reset_cmd.hdr.buf_len)); - - for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { - ret_val = wx_host_interface_command(wx, (u32 *)&reset_cmd, - sizeof(reset_cmd), - WX_HI_COMMAND_TIMEOUT, - true); - if (ret_val != 0) - continue; - - if (reset_cmd.hdr.cmd_or_resp.ret_status == - FW_CEM_RESP_STATUS_SUCCESS) - ret_val = 0; - else - ret_val = -EFAULT; - - break; - } - - return ret_val; -} -EXPORT_SYMBOL(wx_reset_hostif); - -/** * wx_init_eeprom_params - Initialize EEPROM params * @wx: pointer to hardware structure * diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h index b95090e..0b3447b 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -14,7 +14,6 @@ int wx_host_interface_command(struct wx *wx, u32 *buffer, int wx_read_ee_hostif(struct wx *wx, u16 offset, u16 *data); int wx_read_ee_hostif_buffer(struct wx *wx, u16 offset, u16 words, u16 *data); -int wx_reset_hostif(struct wx *wx); void wx_init_eeprom_params(struct wx *wx); void wx_get_mac_addr(struct wx *wx, u8 *mac_addr); void wx_init_rx_addrs(struct wx *wx); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c index 0772eb1..6e130d1 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c @@ -257,16 +257,16 @@ static void txgbe_reset_misc(struct wx *wx) int txgbe_reset_hw(struct wx *wx) { int status; + u32 val; /* Call adapter stop to disable tx/rx and clear interrupts */ status = wx_stop_adapter(wx); if (status != 0) return status; - if (!(((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || - ((wx->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) - wx_reset_hostif(wx); - + val = WX_MIS_RST_LAN_RST(wx->bus.func); + wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST)); + WX_WRITE_FLUSH(wx); usleep_range(10, 100); status = wx_check_flash_load(wx, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wx->bus.func)); -- 2.7.4