From 9816891833fcbd793192b3bb169409b5299aab14 Mon Sep 17 00:00:00 2001
From: junmin kim <junmindd.kim@samsung.com>
Date: Fri, 14 Jul 2017 01:12:20 -0700
Subject: [PATCH] Create qemu config README.md

---
 build/configs/qemu/README.md | 52 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 build/configs/qemu/README.md

diff --git a/build/configs/qemu/README.md b/build/configs/qemu/README.md
new file mode 100644
index 0000000..4008707
--- /dev/null
+++ b/build/configs/qemu/README.md
@@ -0,0 +1,52 @@
+# QEMU
+
+QEMU is a generic and open source machine emulator and virtualizer.
+
+## Information
+
+QEMU uses lm3s6963-ek machine.
+
+## Environment Set-up
+### QEMU installation
+
+```
+wget http://download.qemu-project.org/qemu-2.0.0.tar.xz
+tar xvjf qemu-2.0.0.tar.xz
+cd qemu-2.0.0
+./configure --target-list=arm-softmmu
+make -j 4
+Check executable in "arm-softmmu/qemu-system-arm" 
+```
+## How to program a binary
+
+There are two methods, using QEMU command or make command.  
+After building Tizen RT, follow below steps at $TIZENRT_BASEDIR/os folder.  
+TIZENRT_BASEDIR was set at [[Getting the sources]](../../../README.md#getting-the-sources) tab of Quick Start.
+
+### Using QEMU command
+
+```
+qemu-system-arm -M lm3s6965evb -kernel ../build/output/bin/tinyara -nographic
+```
+
+### Using make command
+
+```
+make download
+```
+
+## Configuration Sets
+### tash_64k
+for running tash under 256KB flash and 64KB sram
+
+### tash_16m
+for running tash under 128MB flash and 16MB sram
+
+## APPENDIX
+### How to change memory size
+If you want to set your sram to 64KB or 16MB, follow these steps.  
+`make menuconfig`  
+Enter `Board Selection` -> `Build for qemu hardware`  
+Select `NONE`(64KB) or `Build for SRAM increased QEMU Hardware`(16MB)  
+Enter `Chip Selection` -> `Boot Memory Configuration`  
+Set `Primary RAM size` to `65536`(64KB) or `16777216`(16MB)
-- 
2.7.4