From 9779f0e1d75c99c79000ed9e303287fc23da3e9e Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Mon, 16 Sep 2013 09:29:03 +0800 Subject: [PATCH] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310 The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 But according to ARM PL310 errata: 752271 ID: 752271: Double linefill feature can cause data corruption Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 Workaround: The only workaround to this erratum is to disable the double linefill feature. This is the default behavior. without this patch, you will meet the following error when run the memtester application at: http://pyropus.ca/software/memtester/ FAILURE: 0x00100000 != 0x00200000 at offset 0x01365664. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365668. FAILURE: 0x00100000 != 0x00200000 at offset 0x0136566c. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365670. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365674. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365678. Signed-off-by: Jason Liu Signed-off-by: Shawn Guo --- arch/arm/mach-imx/system.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 64ff37e..80c177c 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -117,6 +117,17 @@ void __init imx_init_l2cache(void) /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); val |= 0x70800000; + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + if (cpu_is_imx6q()) + val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); -- 2.7.4