From 96ef07f79ae8644ab9c277e3f2f4fb04a54be43d Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 1 May 2019 17:14:05 -0700 Subject: [PATCH] dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY The Qualcomm PCIe2 PHY is a Synopsys based PCIe PHY found in a number of Qualcomm platforms, add a binding to describe this. Signed-off-by: Bjorn Andersson Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/qcom-pcie2-phy.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 0000000..3006425 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,42 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + - #clock-cells: must be 0 + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; -- 2.7.4