From 94dad6bed3c86c00050bf7c2b2ad6b630facae31 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 4 Dec 2020 14:48:05 +0800 Subject: [PATCH] arm64: dts: rockchip: Fix UART pull-ups on rk3328 For UARTs, the local pull-ups should be on the RX pin, not the TX pin. UARTs transmit active-low, so a disconnected RX pin should be pulled high instead of left floating to prevent noise being interpreted as transmissions. This gets rid of bogus sysrq events when the UART console is not connected. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20201204064805.6480-1-wens@kernel.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index bbdb19a..db0d5c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1237,8 +1237,8 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>, - <1 RK_PB0 1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB0 1 &pcfg_pull_up>; }; uart0_cts: uart0-cts { @@ -1256,8 +1256,8 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>, - <3 RK_PA6 4 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>, + <3 RK_PA6 4 &pcfg_pull_up>; }; uart1_cts: uart1-cts { @@ -1275,15 +1275,15 @@ uart2-0 { uart2m0_xfer: uart2m0-xfer { - rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>, - <1 RK_PA1 2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>, + <1 RK_PA1 2 &pcfg_pull_up>; }; }; uart2-1 { uart2m1_xfer: uart2m1-xfer { - rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>, - <2 RK_PA1 1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, + <2 RK_PA1 1 &pcfg_pull_up>; }; }; -- 2.7.4