From 93093cad2aff07acd2e1b7f52d7fb744b03a1b7a Mon Sep 17 00:00:00 2001 From: Chase Southwood Date: Wed, 10 Sep 2014 01:03:44 -0500 Subject: [PATCH] staging: comedi: hwdrv_apci3120: clean up comments This patch fixes improper comment indentation, removes dead code and obsolete comments, and conforms remaining comments to a consistent kernel commenting style. Signed-off-by: Chase Southwood Reviewed-by: Ian Abbott Cc: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- .../comedi/drivers/addi-data/hwdrv_apci3120.c | 364 +++++++-------------- 1 file changed, 117 insertions(+), 247 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index a83e2ae..4c08bcc 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -241,13 +241,6 @@ static const struct comedi_lrange range_apci3120_ao = { /* FUNCTION DEFINITIONS */ - -/* -+----------------------------------------------------------------------------+ -| ANALOG INPUT SUBDEVICE | -+----------------------------------------------------------------------------+ -*/ - static int apci3120_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, @@ -260,7 +253,7 @@ static int apci3120_ai_insn_config(struct comedi_device *dev, if ((data[0] != APCI3120_EOC_MODE) && (data[0] != APCI3120_EOS_MODE)) return -1; - /* Check for Conversion time to be added ?? */ + /* Check for Conversion time to be added */ devpriv->ui_EocEosConversionTime = data[2]; if (data[0] == APCI3120_EOS_MODE) { @@ -282,7 +275,6 @@ static int apci3120_ai_insn_config(struct comedi_device *dev, else devpriv->b_EocEosInterrupt = APCI3120_DISABLE; /* Copy channel list and Range List to devpriv */ - devpriv->ui_AiNbrofChannels = data[3]; for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) devpriv->ui_AiChannelList[i] = data[4 + i]; @@ -311,7 +303,7 @@ static int apci3120_setup_chan_list(struct comedi_device *dev, char check) { struct addi_private *devpriv = dev->private; - unsigned int i; /* , differencial=0, bipolar=0; */ + unsigned int i; unsigned int gain; unsigned short us_TmpValue; @@ -326,7 +318,7 @@ static int apci3120_setup_chan_list(struct comedi_device *dev, if (check) return 1; - /* Code to set the PA and PR...Here it set PA to 0.. */ + /* Code to set the PA and PR...Here it set PA to 0 */ devpriv->us_OutputRegister = devpriv->us_OutputRegister & APCI3120_CLEAR_PA_PR; devpriv->us_OutputRegister = ((n_chan - 1) & 0xf) << 8; @@ -334,16 +326,16 @@ static int apci3120_setup_chan_list(struct comedi_device *dev, for (i = 0; i < n_chan; i++) { /* store range list to card */ - us_TmpValue = CR_CHAN(chanlist[i]); /* get channel number; */ + us_TmpValue = CR_CHAN(chanlist[i]); /* get channel number */ if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff); /* set bipolar */ else - us_TmpValue |= APCI3120_UNIPOLAR; /* enable unipolar...... */ + us_TmpValue |= APCI3120_UNIPOLAR; /* enable unipolar */ gain = CR_RANGE(chanlist[i]); /* get gain number */ us_TmpValue |= ((gain & 0x03) << 4); /* <<4 for G0 and G1 bit in RAM */ - us_TmpValue |= i << 8; /* To select the RAM LOCATION.... */ + us_TmpValue |= i << 8; /* To select the RAM LOCATION */ outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS); } return 1; /* we can serve this with scan logic */ @@ -370,24 +362,21 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, else us_ConvertTiming = (unsigned short) (devpriv->ui_EocEosConversionTime / 1000); /* nano to useconds */ - /* this_board->ai_read(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */ - /* Clear software registers */ devpriv->b_TimerSelectMode = 0; devpriv->b_ModeSelectRegister = 0; devpriv->us_OutputRegister = 0; -/* devpriv->b_DigitalOutputRegister=0; */ if (insn->unused[0] == 222) { /* second insn read */ for (i = 0; i < insn->n; i++) data[i] = devpriv->ui_AiReadData[i]; } else { devpriv->tsk_Current = current; /* Save the current process task structure */ -/* - * Testing if board have the new Quartz and calculate the time value - * to set in the timer - */ + /* + * Testing if board have the new Quartz and calculate the time value + * to set in the timer + */ us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); @@ -406,9 +395,9 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, case APCI3120_EOC_MODE: -/* - * Testing the interrupt flag and set the EOC bit Clears the FIFO - */ + /* + * Testing the interrupt flag and set the EOC bit Clears the FIFO + */ inw(devpriv->iobase + APCI3120_RESET_FIFO); /* Initialize the sequence array */ @@ -556,7 +545,6 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, inw(devpriv->iobase + APCI3120_RD_STATUS); /* Sets gate 0 */ - devpriv->us_OutputRegister = devpriv-> us_OutputRegister | APCI3120_ENABLE_TIMER0; @@ -583,7 +571,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, data[i] = (unsigned int) us_TmpValue; } - devpriv->b_InterruptMode = APCI3120_EOC_MODE; /* Restore defaults. */ + devpriv->b_InterruptMode = APCI3120_EOC_MODE; /* Restore defaults */ } break; @@ -591,7 +579,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, dev_err(dev->class_dev, "inputs wrong\n"); } - devpriv->ui_EocEosConversionTime = 0; /* re initializing the variable; */ + devpriv->ui_EocEosConversionTime = 0; /* re initializing the variable */ } return insn->n; @@ -623,10 +611,10 @@ static int apci3120_reset(struct comedi_device *dev) devpriv->us_OutputRegister = 0; outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); -/* - * Code to set the all anolog o/p channel to 0v 8191 is decimal - * value for zero(0 v)volt in bipolar mode(default) - */ + /* + * Code to set the all anolog o/p channel to 0v 8191 is decimal + * value for zero(0 v)volt in bipolar mode(default) + */ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 1 */ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 2 */ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1); /* channel 3 */ @@ -637,9 +625,6 @@ static int apci3120_reset(struct comedi_device *dev) outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 7 */ outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2); /* channel 8 */ - /* Reset digital output to L0W */ - -/* ES05 outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT); */ udelay(10); inw(dev->iobase + 0); /* make a dummy read */ @@ -689,12 +674,6 @@ static int apci3120_cancel(struct comedi_device *dev, /* Disable BUS Master PCI */ outl(0, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); - /* outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR)&(~AINT_WRITE_COMPL), - * devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR); stop amcc irqs */ - - /* outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR)&(~EN_A2P_TRANSFERS), - * devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR); stop DMA */ - /* Disable ext trigger */ apci3120_exttrig_disable(dev); @@ -811,53 +790,29 @@ static int apci3120_cyclic_ai(int mode, 0, ui_TimerValue0, ui_ConvertTiming; unsigned short us_TmpValue; - /*******************/ /* Resets the FIFO */ - /*******************/ inb(dev->iobase + APCI3120_RESET_FIFO); - /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /* inw(dev->iobase+APCI3120_RD_STATUS); */ - /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ - devpriv->ai_running = 1; /* clear software registers */ devpriv->b_TimerSelectMode = 0; devpriv->us_OutputRegister = 0; devpriv->b_ModeSelectRegister = 0; - /* devpriv->b_DigitalOutputRegister=0; */ - - /* COMMENT JK 07.05.04: Followings calls are in i_APCI3120_StartAnalogInputAcquisition */ - /****************************/ /* Clear Timer Write TC int */ - /****************************/ outl(APCI3120_CLEAR_WRITE_TC_INT, devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_REG_INTCSR); - /************************************/ - /* Clears the timer status register */ - /************************************/ - - /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /* inw(dev->iobase+APCI3120_TIMER_STATUS_REGISTER); */ - /* inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); */ - /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ - - /**************************/ /* Disables All Timer */ /* Sets PR and PA to 0 */ - /**************************/ devpriv->us_OutputRegister = devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_CLEAR_PA_PR; outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); - /*******************/ /* Resets the FIFO */ - /*******************/ /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ inb(devpriv->iobase + APCI3120_RESET_FIFO); /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ @@ -866,44 +821,21 @@ static int apci3120_cyclic_ai(int mode, s->async->cur_chan = 0; devpriv->ui_DmaActualBuffer = 0; - /* value for timer2 minus -2 has to be done .....dunno y?? */ + /* value for timer2 minus -2 has to be done */ ui_TimerValue2 = cmd->stop_arg - 2; ui_ConvertTiming = cmd->convert_arg; if (mode == 2) ui_DelayTiming = cmd->scan_begin_arg; - /**********************************/ /* Initializes the sequence array */ - /**********************************/ if (!apci3120_setup_chan_list(dev, s, devpriv->ui_AiNbrofChannels, cmd->chanlist, 0)) return -EINVAL; us_TmpValue = (unsigned short) inw(dev->iobase + APCI3120_RD_STATUS); -/*** EL241003 : add this section in comment because floats must not be used - if((us_TmpValue & 0x00B0)==0x00B0) - { - f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2); - ui_TimerValue0=(unsigned int)f_ConvertValue; - if (mode==2) - { - f_DelayValue = (((float)ui_DelayTiming * 0.00002) - 2); - ui_TimerValue1 = (unsigned int) f_DelayValue; - } - } - else - { - f_ConvertValue=(((float)ui_ConvertTiming * 0.0012926) - 1); - ui_TimerValue0=(unsigned int)f_ConvertValue; - if (mode == 2) - { - f_DelayValue = (((float)ui_DelayTiming * 0.000012926) - 1); - ui_TimerValue1 = (unsigned int) f_DelayValue; - } - } -***********************************************************************************************/ -/*** EL241003 Begin : add this section to replace floats calculation by integer calculations **/ + + /* EL241003 Begin: add this section to replace floats calculation by integer calculations */ /* EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 */ if ((us_TmpValue & 0x00B0) == 0x00B0 || !strcmp(this_board->pc_DriverName, "apci3001")) { @@ -926,7 +858,7 @@ static int apci3120_cyclic_ai(int mode, ui_TimerValue1 = ui_TimerValue1 / 1000000; } } -/*** EL241003 End ******************************************************************************/ + /* EL241003 End */ if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) apci3120_exttrig_enable(dev); /* activate EXT trigger */ @@ -985,15 +917,8 @@ static int apci3120_cyclic_ai(int mode, break; } - /* ##########common for all modes################# */ - - /***********************/ - /* Clears the SCAN bit */ - /***********************/ - + /* common for all modes */ /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /* devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister | APCI3120_DISABLE_SCAN; */ - devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister & APCI3120_DISABLE_SCAN; /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ @@ -1015,10 +940,10 @@ static int apci3120_cyclic_ai(int mode, dev->iobase + APCI3120_WRITE_MODE_SELECT); if (cmd->stop_src == TRIG_COUNT) { -/* - * configure Timer2 For counting EOS Reset gate 2 of Timer 2 to - * disable it (Set Bit D14 to 0) - */ + /* + * configure Timer2 For counting EOS Reset gate 2 of Timer 2 to + * disable it (Set Bit D14 to 0) + */ devpriv->us_OutputRegister = devpriv-> us_OutputRegister & APCI3120_DISABLE_TIMER2; @@ -1083,15 +1008,9 @@ static int apci3120_cyclic_ai(int mode, } else { /* If DMA Enabled */ unsigned int scan_bytes = cmd->scan_end_arg * sizeof(short); - - /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /* inw(dev->iobase+0); reset EOC bit */ - /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ devpriv->b_InterruptMode = APCI3120_DMA_MODE; - /************************************/ /* Disables the EOC, EOS interrupt */ - /************************************/ devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT & APCI3120_DISABLE_EOS_INT; @@ -1139,17 +1058,15 @@ static int apci3120_cyclic_ai(int mode, /* Initialize DMA */ -/* - * Set Transfer count enable bit and A2P_fifo reset bit in AGCSTS - * register 1 - */ + /* + * Set Transfer count enable bit and A2P_fifo reset bit in AGCSTS + * register 1 + */ ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO; outl(ui_Tmp, devpriv->i_IobaseAmcc + AMCC_OP_REG_AGCSTS); /* changed since 16 bit interface for add on */ - /*********************/ /* ENABLE BUS MASTER */ - /*********************/ outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0); outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW, devpriv->i_IobaseAddon + 2); @@ -1158,112 +1075,88 @@ static int apci3120_cyclic_ai(int mode, outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); -/* - * TO VERIFIED BEGIN JK 07.05.04: Comparison between WIN32 and Linux - * driver - */ + /* + * TO VERIFIED BEGIN JK 07.05.04: Comparison between WIN32 and Linux + * driver + */ outw(0x1000, devpriv->i_IobaseAddon + 2); /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ /* 2 No change */ /* A2P FIFO MANAGEMENT */ /* A2P fifo reset & transfer control enable */ - - /***********************/ - /* A2P FIFO MANAGEMENT */ - /***********************/ outl(APCI3120_A2P_FIFO_MANAGEMENT, devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_MCSR); -/* - * 3 - * beginning address of dma buf The 32 bit address of dma buffer - * is converted into two 16 bit addresses Can done by using _attach - * and put into into an array array used may be for differnet pages - */ + /* + * 3 + * beginning address of dma buf The 32 bit address of dma buffer + * is converted into two 16 bit addresses Can done by using _attach + * and put into into an array array used may be for differnet pages + */ /* DMA Start Address Low */ outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0); outw((devpriv->ul_DmaBufferHw[0] & 0xFFFF), devpriv->i_IobaseAddon + 2); - /*************************/ /* DMA Start Address High */ - /*************************/ outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0); outw((devpriv->ul_DmaBufferHw[0] / 65536), devpriv->i_IobaseAddon + 2); -/* - * 4 - * amount of bytes to be transferred set transfer count used ADDON - * MWTC register commented testing - * outl(devpriv->ui_DmaBufferUsesize[0], - * devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC); - */ + /* + * 4 + * amount of bytes to be transferred set transfer count used ADDON + * MWTC register commented testing + */ - /**************************/ /* Nbr of acquisition LOW */ - /**************************/ outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0); outw((devpriv->ui_DmaBufferUsesize[0] & 0xFFFF), devpriv->i_IobaseAddon + 2); - /***************************/ /* Nbr of acquisition HIGH */ - /***************************/ outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); outw((devpriv->ui_DmaBufferUsesize[0] / 65536), devpriv->i_IobaseAddon + 2); -/* - * 5 - * To configure A2P FIFO testing outl( - * FIFO_ADVANCE_ON_BYTE_2,devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR); - */ + /* + * 5 + * To configure A2P FIFO testing outl( + * FIFO_ADVANCE_ON_BYTE_2,devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR); + */ - /******************/ /* A2P FIFO RESET */ - /******************/ -/* - * TO VERIFY BEGIN JK 07.05.04: Comparison between WIN32 and Linux - * driver - */ + /* + * TO VERIFY BEGIN JK 07.05.04: Comparison between WIN32 and Linux + * driver + */ outl(0x04000000UL, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ -/* - * 6 - * ENABLE A2P FIFO WRITE AND ENABLE AMWEN AMWEN_ENABLE | - * A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 - */ - - /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /* outw(3,devpriv->i_IobaseAddon + 4); */ - /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ - -/* - * 7 - * initialise end of dma interrupt AINT_WRITE_COMPL = - * ENABLE_WRITE_TC_INT(ADDI) - */ - /***************************************************/ + /* + * 6 + * ENABLE A2P FIFO WRITE AND ENABLE AMWEN AMWEN_ENABLE | + * A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + */ + + /* + * 7 + * initialise end of dma interrupt AINT_WRITE_COMPL = + * ENABLE_WRITE_TC_INT(ADDI) + */ /* A2P FIFO CONFIGURATE, END OF DMA intERRUPT INIT */ - /***************************************************/ outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | APCI3120_ENABLE_WRITE_TC_INT), devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - /******************************************/ /* ENABLE A2P FIFO WRITE AND ENABLE AMWEN */ - /******************************************/ outw(3, devpriv->i_IobaseAddon + 4); /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ - /******************/ /* A2P FIFO RESET */ - /******************/ /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ outl(0x04000000UL, devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_MCSR); @@ -1416,11 +1309,11 @@ static void apci3120_interrupt_dma(int irq, void *d) outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); outw(high_word, devpriv->i_IobaseAddon + 2); -/* - * To configure A2P FIFO - * ENABLE A2P FIFO WRITE AND ENABLE AMWEN - * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 - */ + /* + * To configure A2P FIFO + * ENABLE A2P FIFO WRITE AND ENABLE AMWEN + * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + */ outw(3, devpriv->i_IobaseAddon + 4); /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */ outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | @@ -1450,10 +1343,10 @@ static void apci3120_interrupt_dma(int irq, void *d) if (devpriv->b_DmaDoubleBuffer) { /* switch dma buffers */ devpriv->ui_DmaActualBuffer = 1 - devpriv->ui_DmaActualBuffer; } else { -/* - * restart DMA if is not used double buffering - * ADDED REINITIALISE THE DMA - */ + /* + * restart DMA if is not used double buffering + * ADDED REINITIALISE THE DMA + */ ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO; outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS); @@ -1462,11 +1355,11 @@ static void apci3120_interrupt_dma(int irq, void *d) outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW, devpriv->i_IobaseAddon + 2); outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0); - outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); /* */ -/* - * A2P FIFO MANAGEMENT - * A2P fifo reset & transfer control enable - */ + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); + /* + * A2P FIFO MANAGEMENT + * A2P fifo reset & transfer control enable + */ outl(APCI3120_A2P_FIFO_MANAGEMENT, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); @@ -1488,11 +1381,11 @@ static void apci3120_interrupt_dma(int irq, void *d) outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); outw(high_word, devpriv->i_IobaseAddon + 2); -/* - * To configure A2P FIFO - * ENABLE A2P FIFO WRITE AND ENABLE AMWEN - * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 - */ + /* + * To configure A2P FIFO + * ENABLE A2P FIFO WRITE AND ENABLE AMWEN + * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + */ outw(3, devpriv->i_IobaseAddon + 4); /* initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */ outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | @@ -1570,7 +1463,6 @@ static void apci3120_interrupt(int irq, void *d) if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { /* Read the AI Value */ - devpriv->ui_AiReadData[0] = (unsigned int) inw(devpriv->iobase + 0); devpriv->b_EocEosInterrupt = APCI3120_DISABLE; @@ -1670,7 +1562,6 @@ static void apci3120_interrupt(int irq, void *d) default: /* disable Timer Interrupt */ - devpriv->b_ModeSelectRegister = devpriv-> b_ModeSelectRegister & @@ -1688,17 +1579,12 @@ static void apci3120_interrupt(int irq, void *d) if ((int_daq & 0x4) && (devpriv->b_InterruptMode == APCI3120_DMA_MODE)) { if (devpriv->ai_running) { - /****************************/ /* Clear Timer Write TC int */ - /****************************/ - outl(APCI3120_CLEAR_WRITE_TC_INT, devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_REG_INTCSR); - /************************************/ /* Clears the timer status register */ - /************************************/ inw(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); /* do some data transfer */ apci3120_interrupt_dma(irq, d); @@ -1741,13 +1627,12 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, ui_Timervalue2 = data[1] / 1000; /* convert nano seconds to u seconds */ - /* this_board->timer_config(dev, ui_Timervalue2,(unsigned char)data[0]); */ us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); -/* - * EL250804: Testing if board APCI3120 have the new Quartz or if it - * is an APCI3001 and calculate the time value to set in the timer - */ + /* + * EL250804: Testing if board APCI3120 have the new Quartz or if it + * is an APCI3001 and calculate the time value to set in the timer + */ if ((us_TmpValue & 0x00B0) == 0x00B0 || !strcmp(this_board->pc_DriverName, "apci3001")) { /* Calculate the time value to set in the timer */ @@ -1775,11 +1660,6 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, outb(devpriv->b_ModeSelectRegister, devpriv->iobase + APCI3120_WRITE_MODE_SELECT); if (data[0] == APCI3120_TIMER) { /* initialize timer */ - /* devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister | - * APCI3120_ENABLE_TIMER_INT; */ - - /* outb(devpriv->b_ModeSelectRegister,devpriv->iobase+APCI3120_WRITE_MODE_SELECT); */ - /* Set the Timer 2 in mode 2(Timer) */ devpriv->b_TimerSelectMode = (devpriv-> @@ -1787,13 +1667,13 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, outb(devpriv->b_TimerSelectMode, devpriv->iobase + APCI3120_TIMER_CRT1); -/* - * Configure the timer 2 for writing the LOW unsigned short of timer - * is Delay value You must make a b_tmp variable with - * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 - * you can set the digital output and configure the timer 2,and if - * you don't make this, digital output are erase (Set to 0) - */ + /* + * Configure the timer 2 for writing the LOW unsigned short of timer + * is Delay value You must make a b_tmp variable with + * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 + * you can set the digital output and configure the timer 2,and if + * you don't make this, digital output are erase (Set to 0) + */ /* Writing LOW unsigned short */ b_Tmp = ((devpriv-> @@ -1816,20 +1696,19 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, } else { /* Initialize Watch dog */ /* Set the Timer 2 in mode 5(Watchdog) */ - devpriv->b_TimerSelectMode = (devpriv-> b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_5; outb(devpriv->b_TimerSelectMode, devpriv->iobase + APCI3120_TIMER_CRT1); -/* - * Configure the timer 2 for writing the LOW unsigned short of timer - * is Delay value You must make a b_tmp variable with - * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 - * you can set the digital output and configure the timer 2,and if - * you don't make this, digital output are erase (Set to 0) - */ + /* + * Configure the timer 2 for writing the LOW unsigned short of timer + * is Delay value You must make a b_tmp variable with + * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 + * you can set the digital output and configure the timer 2,and if + * you don't make this, digital output are erase (Set to 0) + */ /* Writing LOW unsigned short */ b_Tmp = ((devpriv-> @@ -1898,8 +1777,6 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, ui_Timervalue2 = 0; } - /* this_board->timer_write(dev,data[0],ui_Timervalue2); */ - switch (data[0]) { case APCI3120_START: @@ -1937,7 +1814,7 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, devpriv->iobase + APCI3120_WRITE_MODE_SELECT); if (devpriv->b_Timer2Mode == APCI3120_TIMER) { /* start timer */ - /* For Timer mode is Gate2 must be activated **timer started */ + /* For Timer mode is Gate2 must be activated timer started */ devpriv->us_OutputRegister = devpriv-> us_OutputRegister | APCI3120_ENABLE_TIMER2; @@ -1979,9 +1856,6 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, /* Reset FC_TIMER BIT */ inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); - /* Disable timer */ - /* devpriv->b_Timer2Mode=APCI3120_DISABLE; */ - break; case 2: /* write new value to Timer */ @@ -1990,14 +1864,13 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, "timer2 not configured in TIMER MODE\n"); return -EINVAL; } - /* ui_Timervalue2=data[1]; // passed as argument */ us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); -/* - * EL250804: Testing if board APCI3120 have the new Quartz or if it - * is an APCI3001 and calculate the time value to set in the timer - */ + /* + * EL250804: Testing if board APCI3120 have the new Quartz or if it + * is an APCI3001 and calculate the time value to set in the timer + */ if ((us_TmpValue & 0x00B0) == 0x00B0 || !strcmp(this_board->pc_DriverName, "apci3001")) { /* Calculate the time value to set in the timer */ @@ -2053,8 +1926,6 @@ static int apci3120_read_insn_timer(struct comedi_device *dev, && (devpriv->b_Timer2Mode != APCI3120_TIMER)) { dev_err(dev->class_dev, "timer2 not configured\n"); } - - /* this_board->timer_read(dev,data); */ if (devpriv->b_Timer2Mode == APCI3120_TIMER) { /* Read the LOW unsigned short of Timer 2 register */ @@ -2137,7 +2008,6 @@ static int apci3120_ao_insn_write(struct comedi_device *dev, ui_Range = CR_RANGE(insn->chanspec); ui_Channel = CR_CHAN(insn->chanspec); - /* this_board->ao_write(dev, ui_Range, ui_Channel,data[0]); */ if (ui_Range) { /* if 1 then unipolar */ if (data[0] != 0) @@ -2163,17 +2033,17 @@ static int apci3120_ao_insn_write(struct comedi_device *dev, } while (us_TmpValue != 0x0001); if (ui_Channel <= 3) -/* - * for channel 0-3 out at the register 1 (wrDac1-8) data[i] - * typecasted to ushort since word write is to be done - */ + /* + * for channel 0-3 out at the register 1 (wrDac1-8) data[i] + * typecasted to ushort since word write is to be done + */ outw((unsigned short) data[0], devpriv->iobase + APCI3120_ANALOG_OUTPUT_1); else -/* - * for channel 4-7 out at the register 2 (wrDac5-8) data[i] - * typecasted to ushort since word write is to be done - */ + /* + * for channel 4-7 out at the register 2 (wrDac5-8) data[i] + * typecasted to ushort since word write is to be done + */ outw((unsigned short) data[0], devpriv->iobase + APCI3120_ANALOG_OUTPUT_2); -- 2.7.4