From 91d7ff5aa7e3edd9ab99a424099476ed5667b152 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 30 Jul 2019 20:23:40 +0300 Subject: [PATCH] ARM: tegra: Use WFE for power-gating on Tegra30 Turned out that WFI doesn't work reliably on Tegra30 as a trigger for the power-gating, it causes CPU hang under some circumstances like having memory controller running of PLLP. The TRM doc states that WFI should be used for the Big-Little "Cluster Switch", while WFE for the power-gating. Hence let's use the WFE for CPU0 power-gating, like it is done for the power-gating of a secondary cores. This fixes CPU hang after entering LP2 with memory running off PLLP. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Tested-by: Peter Geis Signed-off-by: Thierry Reding --- arch/arm/mach-tegra/sleep-tegra30.S | 4 +++- drivers/soc/tegra/flowctrl.c | 19 +++++++++++++++++-- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index b408fa5..3341a12 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -682,10 +682,12 @@ tegra30_enter_sleep: dsb ldr r0, [r6, r2] /* memory barrier */ + cmp r10, #TEGRA30 halted: isb dsb - wfi /* CPU should be power gated here */ + wfine /* CPU should be power gated here */ + wfeeq /* !!!FIXME!!! Implement halt failure handler */ b halted diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c index b6bdeef..eb96a30 100644 --- a/drivers/soc/tegra/flowctrl.c +++ b/drivers/soc/tegra/flowctrl.c @@ -91,8 +91,23 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; - /* pwr gating on wfi */ - reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + + if (tegra_get_chip_id() == TEGRA30) { + /* + * The wfi doesn't work well on Tegra30 because + * CPU hangs under some odd circumstances after + * power-gating (like memory running off PLLP), + * hence use wfe that is working perfectly fine. + * Note that Tegra30 TRM doc clearly stands that + * wfi should be used for the "Cluster Switching", + * while wfe for the power-gating, just like it + * is done on Tegra20. + */ + reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; + } else { + /* pwr gating on wfi */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + } break; } reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ -- 2.7.4