From 9167a1c28c2751b97ac48da5384e540e714a752a Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= Date: Tue, 28 Jun 2022 17:54:00 +0200 Subject: [PATCH] powerpc: mpc85xx: Simplify jump to _start_cont in flash code MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit After more patches code for jumping to _start_cont symbol in flash memory involved to code with useless mathematical operations. Currently it does: r3 := CONFIG_SYS_MONITOR_BASE + ABS(_start_cont) - CONFIG_SYS_MONITOR_BASE jump to r3 Which is equivalent of just: r3 := ABS(_start_cont) jump to r3 The purpose of that code is just to jump to _start_code symbol, independently of program counter. So branch must be done to absolute address. Trying to write: ba _start_cont just cause linker error: LD u-boot powerpc-linux-gnuspe-ld.bfd: arch/powerpc/cpu/mpc85xx/start.o: in function `switch_as': (.bootpg+0x4b8): relocation truncated to fit: R_PPC_ADDR24 against symbol `_start_cont' defined in .text section in arch/powerpc/cpu/mpc85xx/start.o make: *** [Makefile:1801: u-boot] Error 1 Probably by the fact that absolute address cannot be expressed by 24-bits. So write the code via mtlr+blr pattern as it was before and load general purpose register with absolute address of the symbol: lis r3,_start_cont@h ori r3,r3,_start_cont@l mtlr r3 blr Seems that gcc and gnu ld linker support symbol@h and symbol@l syntax like number@h and number@l without any problem. And disassembling of compiler u-boot binary proved that lis+ori instructions are called with numbers which represent halves of absolute address of _start_cont symbol. Signed-off-by: Pali Rohár --- arch/powerpc/cpu/mpc85xx/start.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 5009cbe..8a6340d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1126,9 +1126,8 @@ switch_as: #else /* Calculate absolute address in FLASH and jump there */ /*--------------------------------------------------------------*/ - lis r3,CONFIG_VAL(SYS_MONITOR_BASE)@h - ori r3,r3,CONFIG_VAL(SYS_MONITOR_BASE)@l - addi r3,r3,_start_cont - CONFIG_VAL(SYS_MONITOR_BASE) + lis r3,_start_cont@h + ori r3,r3,_start_cont@l mtlr r3 blr #endif -- 2.7.4