From 90706eb825661553a3fb321192143cdcd95cf13d Mon Sep 17 00:00:00 2001 From: Krzysztof Adamski Date: Tue, 5 Dec 2017 23:03:58 +0100 Subject: [PATCH] ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board Similarly to Orange Pi Zero, NanoPi Neo board has an USB OTG port with an ID pin but with unpowered VBUS. This patch enables this port in forced peripheral mode. ohci/ehci nodes are still enabled since the host mode may work if external power source is used. In that case, the mode can be switched for example via sysfs. The same strategy is used for Orange Pi Zero board DTS. Signed-off-by: Krzysztof Adamski Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 78f6c24..9f33f6f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -47,9 +47,26 @@ compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; +&ehci0 { + status = "okay"; +}; + &emac { phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; status = "okay"; }; + +&ohci0 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ +}; -- 2.7.4