From 8f90f3ee83dc54e182d6a7548727cbae4b523e6e Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Wed, 16 Sep 2009 17:53:57 -0700 Subject: [PATCH] wimax/i2400m: cleanup initialization/destruction flow Currently the i2400m driver was starting in a weird way: registering a network device, setting the device up and then registering a WiMAX device. This is an historic artifact, and was causing issues, a some early reports the device sends were getting lost by issue of the wimax_dev not being registered. Fix said situation by doing the wimax device registration in i2400m_setup() after network device registration and before starting thed device. As well, removed spurious setting of the state to UNINITIALIZED; i2400m.dev_start() does that already. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/driver.c | 32 ++++++++++++++------------------ drivers/net/wimax/i2400m/i2400m.h | 30 +++++++++++++++++++++--------- drivers/net/wimax/i2400m/netdev.c | 10 ++++++---- 3 files changed, 41 insertions(+), 31 deletions(-) diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index a33df04..a0ae199 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -754,13 +754,9 @@ EXPORT_SYMBOL_GPL(i2400m_bm_buf_free * * Returns: 0 if ok, < 0 errno code on error. * - * Initializes the bus-generic parts of the i2400m driver; the - * bus-specific parts have been initialized, function pointers filled - * out by the bus-specific probe function. - * - * As well, this registers the WiMAX and net device nodes. Once this - * function returns, the device is operative and has to be ready to - * receive and send network traffic and WiMAX control operations. + * Sets up basic device comunication infrastructure, boots the ROM to + * read the MAC address, registers with the WiMAX and network stacks + * and then brings up the device. */ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags) { @@ -796,18 +792,13 @@ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags) } netif_carrier_off(net_dev); - result = i2400m_dev_start(i2400m, bm_flags); - if (result < 0) - goto error_dev_start; - i2400m->wimax_dev.op_msg_from_user = i2400m_op_msg_from_user; i2400m->wimax_dev.op_rfkill_sw_toggle = i2400m_op_rfkill_sw_toggle; i2400m->wimax_dev.op_reset = i2400m_op_reset; + result = wimax_dev_add(&i2400m->wimax_dev, net_dev); if (result < 0) goto error_wimax_dev_add; - /* User space needs to do some init stuff */ - wimax_state_change(wimax_dev, WIMAX_ST_UNINITIALIZED); /* Now setup all that requires a registered net and wimax device. */ result = sysfs_create_group(&net_dev->dev.kobj, &i2400m_dev_attr_group); @@ -815,22 +806,27 @@ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags) dev_err(dev, "cannot setup i2400m's sysfs: %d\n", result); goto error_sysfs_setup; } + result = i2400m_debugfs_add(i2400m); if (result < 0) { dev_err(dev, "cannot setup i2400m's debugfs: %d\n", result); goto error_debugfs_setup; } + + result = i2400m_dev_start(i2400m, bm_flags); + if (result < 0) + goto error_dev_start; d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); return result; +error_dev_start: + i2400m_debugfs_rm(i2400m); error_debugfs_setup: sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj, &i2400m_dev_attr_group); error_sysfs_setup: wimax_dev_rm(&i2400m->wimax_dev); error_wimax_dev_add: - i2400m_dev_stop(i2400m); -error_dev_start: unregister_netdev(net_dev); error_register_netdev: unregister_pm_notifier(&i2400m->pm_notifier); @@ -854,15 +850,15 @@ void i2400m_release(struct i2400m *i2400m) d_fnstart(3, dev, "(i2400m %p)\n", i2400m); netif_stop_queue(i2400m->wimax_dev.net_dev); + i2400m_dev_stop(i2400m); + i2400m_debugfs_rm(i2400m); sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj, &i2400m_dev_attr_group); wimax_dev_rm(&i2400m->wimax_dev); - i2400m_dev_stop(i2400m); unregister_netdev(i2400m->wimax_dev.net_dev); unregister_pm_notifier(&i2400m->pm_notifier); - kfree(i2400m->bm_ack_buf); - kfree(i2400m->bm_cmd_buf); + i2400m_bm_buf_free(i2400m); d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); } EXPORT_SYMBOL_GPL(i2400m_release); diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 303eb78..2b9c400 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -117,16 +117,28 @@ * well as i2400m->wimax_dev.net_dev and call i2400m_setup(). The * i2400m driver will only register with the WiMAX and network stacks; * the only access done to the device is to read the MAC address so we - * can register a network device. This calls i2400m_dev_start() to - * load firmware, setup communication with the device and configure it - * for operation. + * can register a network device. * - * At this point, control and data communications are possible. + * The high-level call flow is: + * + * bus_probe() + * i2400m_setup() + * boot rom initialization / read mac addr + * network / WiMAX stacks registration + * i2400m_dev_start() + * i2400m->bus_dev_start() + * i2400m_dev_initialize() + * + * The reverse applies for a disconnect() call: * - * On disconnect/driver unload, the bus-specific disconnect function - * calls i2400m_release() to undo i2400m_setup(). i2400m_dev_stop() - * shuts the firmware down and releases resources uses to communicate - * with the device. + * bus_disconnect() + * i2400m_release() + * i2400m_dev_stop() + * i2400m_dev_shutdown() + * i2400m->bus_dev_stop() + * network / WiMAX stack unregistration + * + * At this point, control and data communications are possible. * * While the device is up, it might reset. The bus-specific driver has * to catch that situation and call i2400m_dev_reset_handle() to deal @@ -706,7 +718,7 @@ static inline int i2400m_debugfs_add(struct i2400m *i2400m) static inline void i2400m_debugfs_rm(struct i2400m *i2400m) {} #endif -/* Called by _dev_start()/_dev_stop() to initialize the device itself */ +/* Initialize/shutdown the device */ extern int i2400m_dev_initialize(struct i2400m *); extern void i2400m_dev_shutdown(struct i2400m *); diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c index 0e8f6a0..fefd794 100644 --- a/drivers/net/wimax/i2400m/netdev.c +++ b/drivers/net/wimax/i2400m/netdev.c @@ -102,11 +102,13 @@ int i2400m_open(struct net_device *net_dev) struct device *dev = i2400m_dev(i2400m); d_fnstart(3, dev, "(net_dev %p [i2400m %p])\n", net_dev, i2400m); - if (i2400m->ready == 0) { - dev_err(dev, "Device is still initializing\n"); - result = -EBUSY; - } else + /* Make sure we wait until init is complete... */ + mutex_lock(&i2400m->init_mutex); + if (i2400m->updown) result = 0; + else + result = -EBUSY; + mutex_unlock(&i2400m->init_mutex); d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n", net_dev, i2400m, result); return result; -- 2.7.4