From 8ed6373d31920ae844632ec4666a6b26e115da69 Mon Sep 17 00:00:00 2001 From: Vikas Gupta Date: Wed, 15 Jul 2020 22:57:19 +0530 Subject: [PATCH] drivers: tee: broadcom: add optee based bnxt fw load driver Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE. Signed-off-by: Vikas Gupta Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- drivers/tee/Kconfig | 1 + drivers/tee/Makefile | 1 + drivers/tee/broadcom/Kconfig | 7 ++ drivers/tee/broadcom/Makefile | 3 + drivers/tee/broadcom/chimp_optee.c | 183 +++++++++++++++++++++++++++++++++++++ include/broadcom/chimp.h | 43 +++++++++ 6 files changed, 238 insertions(+) create mode 100644 drivers/tee/broadcom/Kconfig create mode 100644 drivers/tee/broadcom/Makefile create mode 100644 drivers/tee/broadcom/chimp_optee.c create mode 100644 include/broadcom/chimp.h diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig index 5c0c890..5ca5a08 100644 --- a/drivers/tee/Kconfig +++ b/drivers/tee/Kconfig @@ -29,6 +29,7 @@ config SANDBOX_TEE "avb" commands. source "drivers/tee/optee/Kconfig" +source "drivers/tee/broadcom/Kconfig" endmenu diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile index f72c68c..5c8ffdb 100644 --- a/drivers/tee/Makefile +++ b/drivers/tee/Makefile @@ -3,3 +3,4 @@ obj-y += tee-uclass.o obj-$(CONFIG_SANDBOX) += sandbox.o obj-$(CONFIG_OPTEE) += optee/ +obj-y += broadcom/ diff --git a/drivers/tee/broadcom/Kconfig b/drivers/tee/broadcom/Kconfig new file mode 100644 index 0000000..ce95072 --- /dev/null +++ b/drivers/tee/broadcom/Kconfig @@ -0,0 +1,7 @@ +config CHIMP_OPTEE + bool "Enable secure ChiMP firmware loading" + depends on OPTEE + default y + help + This driver is used to load bnxt firmware binary using OpTEE. + bnxt is Broadcom NetXtreme controller Ethernet card. diff --git a/drivers/tee/broadcom/Makefile b/drivers/tee/broadcom/Makefile new file mode 100644 index 0000000..cb3cef1 --- /dev/null +++ b/drivers/tee/broadcom/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += chimp_optee.o diff --git a/drivers/tee/broadcom/chimp_optee.c b/drivers/tee/broadcom/chimp_optee.c new file mode 100644 index 0000000..37f9b09 --- /dev/null +++ b/drivers/tee/broadcom/chimp_optee.c @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: BSD-2-Clause +/* + * Copyright 2020 Broadcom. + */ + +#include +#include +#include + +#ifdef CONFIG_CHIMP_OPTEE + +#define CHMIP_BOOT_UUID { 0x6272636D, 0x2019, 0x0716, \ + { 0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49 } } + +enum { + TEE_CHIMP_FASTBOOT = 0, + TEE_CHIMP_HEALTH_STATUS, + TEE_CHIMP_HANDSHAKE_STATUS, +} tee_chmip_cmd; + +struct bcm_chimp_data { + struct udevice *tee; + u32 session; +} chimp_data; + +static int get_open_session(struct bcm_chimp_data *b_data) +{ + const struct tee_optee_ta_uuid uuid = CHMIP_BOOT_UUID; + struct tee_open_session_arg arg; + struct udevice *tee = NULL; + int rc; + + tee = tee_find_device(NULL, NULL, NULL, NULL); + if (!tee) + return -ENODEV; + + memset(&arg, 0, sizeof(arg)); + tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); + rc = tee_open_session(tee, &arg, 0, NULL); + if (rc < 0) + return -ENODEV; + + b_data->tee = tee; + b_data->session = arg.session; + + return 0; +} + +static int init_arg(struct tee_invoke_arg *arg, u32 func) +{ + if (get_open_session(&chimp_data)) + return -EINVAL; + + memset(arg, 0, sizeof(struct tee_invoke_arg)); + arg->func = func; + arg->session = chimp_data.session; + + return 0; +} + +int chimp_handshake_status_optee(u32 timeout, u32 *hs) +{ + struct tee_invoke_arg arg; + struct tee_param param[1]; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_HANDSHAKE_STATUS); + if (ret < 0) + return ret; + + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INOUT; + param[0].u.value.a = timeout; + + ret = tee_invoke_func(chimp_data.tee, &arg, ARRAY_SIZE(param), param); + if (ret < 0) { + printf("Handshake status command failed\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + *hs = param[0].u.value.a; + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} + +int chimp_health_status_optee(u32 *health) +{ + struct tee_invoke_arg arg; + struct tee_param param[1]; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_HEALTH_STATUS); + if (ret < 0) + return ret; + + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + ret = tee_invoke_func(chimp_data.tee, &arg, ARRAY_SIZE(param), param); + if (ret < 0) { + printf("Helath status command failed\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + *health = param[0].u.value.a; + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} + +int chimp_fastboot_optee(void) +{ + struct tee_invoke_arg arg; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_FASTBOOT); + if (ret < 0) + return ret; + + ret = tee_invoke_func(chimp_data.tee, &arg, 0, NULL); + if (ret < 0) { + printf("Chimp boot_fail\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} +#else +int chimp_handshake_status_optee(u32 timeout, u32 *status) +{ + printf("ChiMP handshake status fail (OPTEE not enabled)\n"); + + return -EINVAL; +} + +int chimp_health_status_optee(u32 *status) +{ + printf("ChiMP health status fail (OPTEE not enabled)\n"); + + return -EINVAL; +} + +int chimp_fastboot_optee(void) +{ + printf("ChiMP secure boot fail (OPTEE not enabled)\n"); + + return -EINVAL; +} +#endif /* CONFIG_CHIMP_OPTEE */ diff --git a/include/broadcom/chimp.h b/include/broadcom/chimp.h new file mode 100644 index 0000000..7f64152 --- /dev/null +++ b/include/broadcom/chimp.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom. + * + */ + +#ifndef __CHIMP_H__ +#define __CHIMP_H__ + +#include + +/** + * chimp_fastboot_optee() - api to load bnxt firmware + * + * @return: 0 on success and -ve on failure + */ +int chimp_fastboot_optee(void); + +/** + * chimp_health_status_optee() - get chimp health status + * + * Chimp health status could be firmware is in good condition or + * bad condition because of crash/hang. + * + * @status: pointer to get chimp health status + * + * @return: 0 on success and -ve on failure + */ +int chimp_health_status_optee(u32 *status); + +/** + * chimp_handshake_status_optee() - get chimp handshake status. + * + * To know firmware is loaded and running. + * + * @timeout: timeout value, if 0 then default timeout is considered by op-tee + * @hstatus: pointer to chimp handshake status + * + * @return: 0 on success and -ve on failure + */ +int chimp_handshake_status_optee(u32 timeout, u32 *hstatus); + +#endif -- 2.7.4