From 8ddc28015c29f3ea54f48d06e4de109c384460bd Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 14 Mar 2014 18:04:03 -0300 Subject: [PATCH] upstream: [media] adv7180: free an interrupt on failure paths in init_device() There is request_irq() in init_device(), but the interrupt is not removed on failure paths. The patch adds proper error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7180.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 9cfc9a3..5e638b1 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -561,40 +561,44 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state) ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, ADV7180_ADI_CTRL_IRQ_SPACE); if (ret < 0) - return ret; + goto err; /* config the Interrupt pin to be active low */ ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI, ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0); if (ret < 0) - return ret; + goto err; /* enable AD change interrupts interrupts */ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI, ADV7180_IRQ3_AD_CHANGE); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0); if (ret < 0) - return ret; + goto err; } return 0; + +err: + free_irq(state->irq, state); + return ret; } static int adv7180_probe(struct i2c_client *client, -- 2.7.4