From 8d85808fa11c0853cb450f85cdaa7770892a1cd7 Mon Sep 17 00:00:00 2001
From: Joe Hershberger <joe.hershberger@ni.com>
Date: Tue, 11 Oct 2011 23:57:18 -0500
Subject: [PATCH] mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
 include/configs/MPC837XEMDS.h | 283 +++++++++++++++++++++++++-----------------
 1 file changed, 166 insertions(+), 117 deletions(-)

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 03aedec..76e598d 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -88,17 +88,17 @@
 
 /* Arbiter Configuration Register */
 #define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth is 4 */
-#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count is 4 */
+#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count is 4 */
 
 /* System Priority Control Register */
-#define CONFIG_SYS_SPCR_TSECEP		3	/* eTSEC1/2 emergency has highest priority */
+#define CONFIG_SYS_SPCR_TSECEP	3 /* eTSEC1/2 emergency has highest priority */
 
 /*
  * IP blocks clock configuration
  */
 #define CONFIG_SYS_SCCR_TSEC1CM	1	/* CSB:eTSEC1 = 1:1 */
 #define CONFIG_SYS_SCCR_TSEC2CM	1	/* CSB:eTSEC2 = 1:1 */
-#define CONFIG_SYS_SCCR_SATACM		SCCR_SATACM_2	/* CSB:SATA[0:3] = 2:1 */
+#define CONFIG_SYS_SCCR_SATACM	SCCR_SATACM_2	/* CSB:SATA[0:3] = 2:1 */
 
 /*
  * System IO Config
@@ -146,46 +146,47 @@
  */
 #define CONFIG_SYS_DDR_SIZE		512 /* MB */
 #define CONFIG_SYS_DDR_CS0_BNDS	0x0000001f
-#define CONFIG_SYS_DDR_CS0_CONFIG	( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
 				| 0x00010000  /* ODT_WR to CSn */ \
-				| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
+				| CSCONFIG_ROW_BIT_14 \
+				| CSCONFIG_COL_BIT_10)
 				/* 0x80010202 */
 #define CONFIG_SYS_DDR_TIMING_3	0x00000000
-#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
-				| ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
-				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
-				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
-				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
+				| (0 << TIMING_CFG0_WRT_SHIFT) \
+				| (0 << TIMING_CFG0_RRT_SHIFT) \
+				| (0 << TIMING_CFG0_WWT_SHIFT) \
+				| (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+				| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 				/* 0x00620802 */
-#define CONFIG_SYS_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
-				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
-				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
-				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
-				| (13 << TIMING_CFG1_REFREC_SHIFT ) \
-				| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
-				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
-				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+#define CONFIG_SYS_DDR_TIMING_1	((3 << TIMING_CFG1_PRETOACT_SHIFT) \
+				| (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+				| (3 << TIMING_CFG1_ACTTORW_SHIFT) \
+				| (5 << TIMING_CFG1_CASLAT_SHIFT) \
+				| (13 << TIMING_CFG1_REFREC_SHIFT) \
+				| (3 << TIMING_CFG1_WRREC_SHIFT) \
+				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+				| (2 << TIMING_CFG1_WRTORD_SHIFT))
 				/* 0x3935d322 */
-#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
-				| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
-				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
-				| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
-				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
-				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
-				| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
+				| (6 << TIMING_CFG2_CPO_SHIFT) \
+				| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
+				| (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
+				| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
+				| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
+				| (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
 				/* 0x131088c8 */
-#define CONFIG_SYS_DDR_INTERVAL	( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
-				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+#define CONFIG_SYS_DDR_INTERVAL	((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \
+				| (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 				/* 0x03E00100 */
 #define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
-				| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
+#define CONFIG_SYS_DDR_MODE	((0x0448 << SDRAM_MODE_ESD_SHIFT) \
+				| (0x1432 << SDRAM_MODE_SD_SHIFT))
 				/* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CONFIG_SYS_DDR_MODE2		0x00000000
+#define CONFIG_SYS_DDR_MODE2	0x00000000
 #endif
 
 /*
@@ -207,8 +208,8 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN	(384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN	(512 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
@@ -216,7 +217,8 @@
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -229,19 +231,20 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI	/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE		32 /* max FLASH size is 32M */
-#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
+#define CONFIG_SYS_FLASH_BASE	0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE	32 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use h/w Flash protection. */
 
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+					/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
 
-#define CONFIG_SYS_BR0_PRELIM		( CONFIG_SYS_FLASH_BASE	/* Flash Base address */ \
-				| (2 << BR_PS_SHIFT)	/* 16 bit port size */ \
-				| BR_V )		/* valid */
-#define CONFIG_SYS_OR0_PRELIM		( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
+				| (2 << BR_PS_SHIFT)	/* 16 bit port */ \
+				| BR_V)			/* valid */
+#define CONFIG_SYS_OR0_PRELIM	((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
 				| OR_UPM_XAM \
 				| OR_GPCM_CSNT \
 				| OR_GPCM_ACS_DIV2 \
@@ -249,7 +252,7 @@
 				| OR_GPCM_SCY_15 \
 				| OR_GPCM_TRLX \
 				| OR_GPCM_EHTR \
-				| OR_GPCM_EAD )
+				| OR_GPCM_EAD)
 				/* 0xFE000FF7 */
 
 #define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
@@ -263,11 +266,13 @@
  * BCSR on the Local Bus
  */
 #define CONFIG_SYS_BCSR		0xF8000000
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR /* Access window base at BCSR base */
+					/* Access window base at BCSR base */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR
 #define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
 
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
-#define CONFIG_SYS_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+				/* Port size=8bit, MSEL=GPCM */
+#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_BCSR | 0x00000801)
+#define CONFIG_SYS_OR1_PRELIM	0xFFFFE9f7 /* length 32K */
 
 /*
  * NAND Flash on the Local Bus
@@ -275,22 +280,22 @@
 #define CONFIG_CMD_NAND		1
 #define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_NAND_FSL_ELBC 	1
+#define CONFIG_NAND_FSL_ELBC	1
 
-#define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
-#define CONFIG_SYS_BR3_PRELIM		( CONFIG_SYS_NAND_BASE \
+#define CONFIG_SYS_NAND_BASE	0xE0600000	/* 0xE0600000 */
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
-				| BR_PS_8		/* Port Size = 8 bit */ \
+				| BR_PS_8		/* 8 bit port */ \
 				| BR_MS_FCM		/* MSEL = FCM */ \
-				| BR_V )		/* valid */
-#define CONFIG_SYS_OR3_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| BR_V)		/* valid */
+#define CONFIG_SYS_OR3_PRELIM	(0xFFFF8000	/* length 32K */ \
 				| OR_FCM_BCTLD \
 				| OR_FCM_CST \
 				| OR_FCM_CHT \
 				| OR_FCM_SCY_1 \
 				| OR_FCM_RST \
 				| OR_FCM_TRLX \
-				| OR_FCM_EHTR )
+				| OR_FCM_EHTR)
 				/* 0xFFFF919E */
 
 #define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_NAND_BASE
@@ -306,7 +311,7 @@
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
 #define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
@@ -326,11 +331,11 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE	0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C2_OFFSET	0x3100
 
 /*
  * Config on-board RTC
@@ -342,9 +347,9 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_MEM_BASE		0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS		CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE		0x10000000 /* 256M */
 #define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
 #define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
 #define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
@@ -397,9 +402,9 @@ extern int board_pci_host_broken(void);
  */
 #define CONFIG_TSEC_ENET	/* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define CONFIG_SYS_TSEC2_OFFSET	0x25000
-#define CONFIG_SYS_TSEC2		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 
 /*
  * TSEC ethernet configuration
@@ -435,12 +440,12 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET	0x18000
-#define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA1	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
 #define CONFIG_SATA2
 #define CONFIG_SYS_SATA2_OFFSET	0x19000
-#define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA2	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
@@ -454,11 +459,12 @@ extern int board_pci_host_broken(void);
  */
 #ifndef CONFIG_SYS_RAMBOOT
 	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_ADDR		\
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 	#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
 	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
@@ -526,17 +532,19 @@ extern int board_pci_host_broken(void);
 	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
+				/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+				/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
@@ -555,53 +563,93 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_SDRAM_LOWER		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_SDRAM_UPPER		(CONFIG_SYS_SDRAM_BASE + 0x10000000)
 
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
 #define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
 #define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR \
+				| BATU_BL_8M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
 #define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* BCSR: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_BCSR | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_BCSR \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_BCSR \
+				| BATU_BL_128K \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE \
+				| BATU_BL_32M \
+				| BATU_VS \
+				| BATU_VP)
+#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* Stack in dcache: cacheable, no memory coherence */
 #define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR \
+				| BATU_BL_128K \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else
@@ -639,30 +687,31 @@ extern int board_pci_host_broken(void);
 #undef CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-   "netdev=eth0\0"							\
-   "consoledev=ttyS0\0"							\
-   "ramdiskaddr=1000000\0"						\
-   "ramdiskfile=ramfs.83xx\0"						\
-   "fdtaddr=780000\0"							\
-   "fdtfile=mpc8379_mds.dtb\0"						\
-   ""
+	"netdev=eth0\0"							\
+	"consoledev=ttyS0\0"						\
+	"ramdiskaddr=1000000\0"						\
+	"ramdiskfile=ramfs.83xx\0"					\
+	"fdtaddr=780000\0"						\
+	"fdtfile=mpc8379_mds.dtb\0"					\
+	""
 
 #define CONFIG_NFSBOOTCOMMAND						\
-   "setenv bootargs root=/dev/nfs rw "					\
-      "nfsroot=$serverip:$rootpath "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr - $fdtaddr"
+	"setenv bootargs root=/dev/nfs rw "				\
+		"nfsroot=$serverip:$rootpath "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
+							"$netdev:off "	\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND						\
-   "setenv bootargs root=/dev/ram rw "					\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $ramdiskaddr $ramdiskfile;"					\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+	"setenv bootargs root=/dev/ram rw "				\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-- 
2.7.4