From 8d76bf8a6a6b3201b309faa623842ba3ec426b7a Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 13 Dec 2016 12:45:57 +0100 Subject: [PATCH] ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for iic nodes Use recently added R-Car Gen 2 fallback binding for iic nodes in DT for r8a7791 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7791 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index b61700a..55872fc 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -518,7 +518,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; @@ -532,7 +533,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; @@ -546,7 +548,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; -- 2.7.4