From 8b226173a1e9ea1b77dabb3d5583d376c53164c3 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 3 Feb 2021 03:57:18 +0100 Subject: [PATCH] media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1 The PIXEL_BIT field of the CSICR1 register is documented as setting the Bayer data width to 10 bits, and is set by the driver for all non-YUV pixel formats. Test code from NXP showed that the bit shouldn't be set for Bayer formats, and this was confirmed by experimentation with RAW8 capture (which doesn't work when setting the field) and RAW10 capture (for which setting the field doesn't seem to make a difference) on i.MX8MM with an OV5640 sensor connected over CSI-2. Don't set it. Signed-off-by: Laurent Pinchart Reviewed-by: Rui Miguel Silva Tested-by: Martin Kepplinger Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/imx/imx7-media-csi.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c index 8aefcf0..bacbd7c 100644 --- a/drivers/staging/media/imx/imx7-media-csi.c +++ b/drivers/staging/media/imx/imx7-media-csi.c @@ -495,21 +495,6 @@ static void imx7_csi_configure(struct imx7_csi *csi) cr18 |= BIT_MIPI_DATA_FORMAT_YUV422_8B; break; } - - switch (out_pix->pixelformat) { - case V4L2_PIX_FMT_Y10: - case V4L2_PIX_FMT_Y12: - case V4L2_PIX_FMT_SBGGR8: - case V4L2_PIX_FMT_SGBRG8: - case V4L2_PIX_FMT_SGRBG8: - case V4L2_PIX_FMT_SRGGB8: - case V4L2_PIX_FMT_SBGGR16: - case V4L2_PIX_FMT_SGBRG16: - case V4L2_PIX_FMT_SGRBG16: - case V4L2_PIX_FMT_SRGGB16: - cr1 |= BIT_PIXEL_BIT; - break; - } } imx7_csi_reg_write(csi, cr1, CSI_CSICR1); -- 2.7.4