From 8af15365a36845c4c15d4c8046ddccff331d5263 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Mar 2021 14:03:47 +0200 Subject: [PATCH] ARM: dts: Configure interconnect target module for dra7 sata We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that the old sysc register offset is wrong, the real offset is at 0x1100 as listed in TRM for SATA_SYSCONFIG register. Looks like we've been happily using sata on the bootloader configured sysconfig register and nobody noticed. Also the old register range for SATAMAC_wrapper registers is wrong at 7 while it should be 8. But that too seems harmless. There is also an L3 parent interconnect range that we don't seem to be using. That can be added as needed later on. Tested-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 29 ++++++++++++++++++++++++++--- arch/arm/boot/dts/dra7.dtsi | 12 ------------ 2 files changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 3bf90d9..2c5c682 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -572,11 +572,34 @@ }; target-module@40000 { /* 0x4a140000, ap 31 06.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "sata"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + , + ; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = ; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; target-module@51000 { /* 0x4a151000, ap 33 50.0 */ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 91d5763..e9f3435 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -785,18 +785,6 @@ }; }; - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = ; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; - }; - /* OCP2SCP1 */ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ -- 2.7.4