From 8aa80fc8bdf229fa772c9bfdff96920da8db784f Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Sun, 23 Feb 2020 22:47:16 +0200 Subject: [PATCH] arm64: dts: ls1028a: enable switch PHYs on RDB Link the switch PHY nodes to the central MDIO controller PCIe endpoint node on LS1028A (implemented as PF3) so that PHYs are accessible via MDIO. Enable SGMII AN on the Felix PCS by telling PHYLINK that the VSC8514 quad PHY is capable of in-band-status. The PHYs are used in poll mode due to an issue with the interrupt line on current revisions of the LS1028A-RDB board. Signed-off-by: Claudiu Manoil Signed-off-by: Alex Marginean Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 60 +++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 14efe3b..6d05b76 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -177,6 +177,25 @@ status = "okay"; }; +&enetc_mdio_pf3 { + /* VSC8514 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@10 { + reg = <0x10>; + }; + + qsgmii_phy1: ethernet-phy@11 { + reg = <0x11>; + }; + + qsgmii_phy2: ethernet-phy@12 { + reg = <0x12>; + }; + + qsgmii_phy3: ethernet-phy@13 { + reg = <0x13>; + }; +}; + &enetc_port0 { phy-handle = <&sgmii_phy0>; phy-connection-type = "sgmii"; @@ -191,6 +210,47 @@ }; }; +&enetc_port2 { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; +}; + &sai4 { status = "okay"; }; -- 2.7.4