From 8a880a2014e3ab50e66252335bd71d61b0487a30 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Mar 2018 15:36:07 +0100 Subject: [PATCH] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards Despite its name being prefixed with bytcr, before this commit the bytcr_rt5651 machine driver could not work with Bay Trail CR boards, as those only have SSP0 and it only supported SSP0-AIF1 setups. This commit adds support for this, autodetecting AIF1 vs AIF2 based on BIOS tables. While at it also add support for SSP2-AIF2 setups, as that requires only minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support. Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into merging the 2 machine drivers into 1 to avoid copy-pasting, but there are enough subtile differences to make this hard *and* with all the quirks the machine driver already is full with if (variant-foo) then ... else ... constructs adding more of these is going to make the code unreadable. Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 217 +++++++++++++++++++++++++++++++--- 1 file changed, 201 insertions(+), 16 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index b798ebb..103c4b0 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -72,6 +73,9 @@ enum { #define BYT_RT5651_DMIC_EN BIT(16) #define BYT_RT5651_MCLK_EN BIT(17) #define BYT_RT5651_MCLK_25MHZ BIT(18) +#define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */ +#define BYT_RT5651_SSP0_AIF1 BIT(20) +#define BYT_RT5651_SSP0_AIF2 BIT(21) /* jack-detect-source + dmic-en + ovcd-th + -sf + terminating empty entry */ #define MAX_NO_PROPS 5 @@ -81,8 +85,7 @@ struct byt_rt5651_private { struct snd_soc_jack jack; }; -static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP | - BYT_RT5651_MCLK_EN; +static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN; static void log_quirks(struct device *dev) { @@ -110,9 +113,16 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk MCLK_EN enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) dev_info(dev, "quirk MCLK_25MHZ enabled"); + if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) + dev_info(dev, "quirk SSP2_AIF2 enabled\n"); + if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) + dev_info(dev, "quirk SSP0_AIF1 enabled\n"); + if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) + dev_info(dev, "quirk SSP0_AIF2 enabled\n"); } #define BYT_CODEC_DAI1 "rt5651-aif1" +#define BYT_CODEC_DAI2 "rt5651-aif2" static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, int rate, int bclk_ratio) @@ -156,6 +166,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, int ret; codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); + if (!codec_dai) + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); @@ -213,13 +225,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Speaker", NULL, "Platform Clock"}, {"Line In", NULL, "Platform Clock"}, - {"AIF1 Playback", NULL, "ssp2 Tx"}, - {"ssp2 Tx", NULL, "codec_out0"}, - {"ssp2 Tx", NULL, "codec_out1"}, - {"codec_in0", NULL, "ssp2 Rx"}, - {"codec_in1", NULL, "ssp2 Rx"}, - {"ssp2 Rx", NULL, "AIF1 Capture"}, - {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, @@ -267,6 +272,42 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_hs_in3_map[] = { {"IN3P", NULL, "Headset Mic"}, }; +static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { + {"ssp0 Tx", NULL, "modem_out"}, + {"modem_in", NULL, "ssp0 Rx"}, + + {"AIF1 Playback", NULL, "ssp0 Tx"}, + {"ssp0 Rx", NULL, "AIF1 Capture"}, +}; + +static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = { + {"ssp0 Tx", NULL, "modem_out"}, + {"modem_in", NULL, "ssp0 Rx"}, + + {"AIF2 Playback", NULL, "ssp0 Tx"}, + {"ssp0 Rx", NULL, "AIF2 Capture"}, +}; + +static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = { + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"AIF1 Playback", NULL, "ssp2 Tx"}, + {"ssp2 Rx", NULL, "AIF1 Capture"}, +}; + +static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = { + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"AIF2 Playback", NULL, "ssp2 Tx"}, + {"ssp2 Rx", NULL, "AIF2 Capture"}, +}; + static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -291,9 +332,16 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->codec_dai; + snd_pcm_format_t format = params_format(params); int rate = params_rate(params); + int bclk_ratio; - return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, 50); + if (format == SNDRV_PCM_FORMAT_S16_LE) + bclk_ratio = 32; + else + bclk_ratio = 50; + + return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio); } static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) @@ -420,6 +468,26 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) if (ret) return ret; + if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) { + ret = snd_soc_dapm_add_routes(&card->dapm, + byt_rt5651_ssp2_aif2_map, + ARRAY_SIZE(byt_rt5651_ssp2_aif2_map)); + } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) { + ret = snd_soc_dapm_add_routes(&card->dapm, + byt_rt5651_ssp0_aif1_map, + ARRAY_SIZE(byt_rt5651_ssp0_aif1_map)); + } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) { + ret = snd_soc_dapm_add_routes(&card->dapm, + byt_rt5651_ssp0_aif2_map, + ARRAY_SIZE(byt_rt5651_ssp0_aif2_map)); + } else { + ret = snd_soc_dapm_add_routes(&card->dapm, + byt_rt5651_ssp2_aif1_map, + ARRAY_SIZE(byt_rt5651_ssp2_aif1_map)); + } + if (ret) + return ret; + ret = snd_soc_add_card_controls(card, byt_rt5651_controls, ARRAY_SIZE(byt_rt5651_controls)); if (ret) { @@ -485,18 +553,26 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, SNDRV_PCM_HW_PARAM_RATE); struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); - int ret; + int ret, bits; - /* The DSP will covert the FE rate to 48k, stereo, 24bits */ + /* The DSP will covert the FE rate to 48k, stereo */ rate->min = rate->max = 48000; channels->min = channels->max = 2; - /* set SSP2 to 24-bit */ - params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || + (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { + /* set SSP0 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + bits = 16; + } else { + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + bits = 24; + } /* * Default mode for SSP configuration is TDM 4 slot, override config - * with explicit setting to I2S 2ch 24-bit. The word length is set with + * with explicit setting to I2S 2ch. The word length is set with * dai_set_tdm_slot() since there is no other API exposed */ ret = snd_soc_dai_set_fmt(rtd->cpu_dai, @@ -510,7 +586,7 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, return ret; } - ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits); if (ret < 0) { dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); return ret; @@ -605,12 +681,32 @@ static struct snd_soc_card byt_rt5651_card = { }; static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; +static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ +static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ + +static bool is_valleyview(void) +{ + static const struct x86_cpu_id cpu_ids[] = { + { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ + {} + }; + + if (!x86_match_cpu(cpu_ids)) + return false; + return true; +} + +struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ + u64 aif_value; /* 1: AIF1, 2: AIF2 */ + u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ +}; static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; + bool is_bytcr = false; int ret_val = 0; int dai_index = 0; int i; @@ -643,6 +739,73 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) "%s%s", "i2c-", i2c_name); byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; + /* + * swap SSP0 if bytcr is detected + * (will be overridden if DMI quirk is detected) + */ + if (is_valleyview()) { + struct sst_platform_info *p_info = mach->pdata; + const struct sst_res_info *res_info = p_info->res_info; + + if (res_info->acpi_ipc_irq_index == 0) + is_bytcr = true; + } + + if (is_bytcr) { + /* + * Baytrail CR platforms may have CHAN package in BIOS, try + * to find relevant routing quirk based as done on Windows + * platforms. We have to read the information directly from the + * BIOS, at this stage the card is not created and the links + * with the codec driver/pdata are non-existent + */ + + struct acpi_chan_package chan_package; + + /* format specified: 2 64-bit integers */ + struct acpi_buffer format = {sizeof("NN"), "NN"}; + struct acpi_buffer state = {0, NULL}; + struct snd_soc_acpi_package_context pkg_ctx; + bool pkg_found = false; + + state.length = sizeof(chan_package); + state.pointer = &chan_package; + + pkg_ctx.name = "CHAN"; + pkg_ctx.length = 2; + pkg_ctx.format = &format; + pkg_ctx.state = &state; + pkg_ctx.data_valid = false; + + pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, + &pkg_ctx); + if (pkg_found) { + if (chan_package.aif_value == 1) { + dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); + byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1; + } else if (chan_package.aif_value == 2) { + dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); + byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; + } else { + dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); + pkg_found = false; + } + } + + if (!pkg_found) { + /* no BIOS indications, assume SSP0-AIF2 connection */ + byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; + } + + /* change defaults for Baytrail-CR capture */ + byt_rt5651_quirk |= BYT_RT5651_JD1_1 | + BYT_RT5651_OVCD_TH_2000UA | + BYT_RT5651_OVCD_SF_0P75 | + BYT_RT5651_IN2_HS_IN3_MAP; + } else { + byt_rt5651_quirk |= BYT_RT5651_DMIC_MAP; + } + /* check quirks before creating card */ dmi_check_system(byt_rt5651_quirk_table); @@ -653,6 +816,28 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) log_quirks(&pdev->dev); + if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) || + (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { + /* fixup codec aif name */ + snprintf(byt_rt5651_codec_aif_name, + sizeof(byt_rt5651_codec_aif_name), + "%s", "rt5651-aif2"); + + byt_rt5651_dais[dai_index].codec_dai_name = + byt_rt5651_codec_aif_name; + } + + if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || + (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { + /* fixup cpu dai name name */ + snprintf(byt_rt5651_cpu_dai_name, + sizeof(byt_rt5651_cpu_dai_name), + "%s", "ssp0-port"); + + byt_rt5651_dais[dai_index].cpu_dai_name = + byt_rt5651_cpu_dai_name; + } + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { -- 2.7.4