From 8a27ca39478270e07baf9c09aa0c99709769ba03 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Mon, 18 Oct 2021 12:57:57 +0200 Subject: [PATCH] wcn36xx: Correct band/freq reporting on RX For packets originating from hardware scan, the channel and band is included in the buffer descriptor (bd->rf_band & bd->rx_ch). For 2Ghz band the channel value is directly reported in the 4-bit rx_ch field. For 5Ghz band, the rx_ch field contains a mapping index (given the 4-bit limitation). The reserved0 value field is also used to extend 4-bit mapping to 5-bit mapping to support more than 16 5Ghz channels. This change adds correct reporting of the frequency/band, that is used in scan mechanism. And is required for 5Ghz hardware scan support. Signed-off-by: Loic Poulain Tested-by: Bryan O'Donoghue Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1634554678-7993-1-git-send-email-loic.poulain@linaro.org --- drivers/net/wireless/ath/wcn36xx/txrx.c | 23 +++++++++++++++++++++++ drivers/net/wireless/ath/wcn36xx/txrx.h | 3 ++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c index eaf2410..c0f51fa 100644 --- a/drivers/net/wireless/ath/wcn36xx/txrx.c +++ b/drivers/net/wireless/ath/wcn36xx/txrx.c @@ -31,6 +31,13 @@ struct wcn36xx_rate { enum rate_info_bw bw; }; +/* Buffer descriptor rx_ch field is limited to 5-bit (4+1), a mapping is used + * for 11A Channels. + */ +static const u8 ab_rx_ch_map[] = { 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, + 108, 112, 116, 120, 124, 128, 132, 136, 140, + 149, 153, 157, 161, 165, 144 }; + static const struct wcn36xx_rate wcn36xx_rate_table[] = { /* 11b rates */ { 10, 0, RX_ENC_LEGACY, 0, RATE_INFO_BW_20 }, @@ -291,6 +298,22 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) ieee80211_is_probe_resp(hdr->frame_control)) status.boottime_ns = ktime_get_boottime_ns(); + if (bd->scan_learn) { + /* If packet originates from hardware scanning, extract the + * band/channel from bd descriptor. + */ + u8 hwch = (bd->reserved0 << 4) + bd->rx_ch; + + if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) { + status.band = NL80211_BAND_5GHZ; + status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1], + status.band); + } else { + status.band = NL80211_BAND_2GHZ; + status.freq = ieee80211_channel_to_frequency(hwch, status.band); + } + } + memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); if (ieee80211_is_beacon(hdr->frame_control)) { diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.h b/drivers/net/wireless/ath/wcn36xx/txrx.h index 032216e..b54311f 100644 --- a/drivers/net/wireless/ath/wcn36xx/txrx.h +++ b/drivers/net/wireless/ath/wcn36xx/txrx.h @@ -110,7 +110,8 @@ struct wcn36xx_rx_bd { /* 0x44 */ u32 exp_seq_num:12; u32 cur_seq_num:12; - u32 fr_type_subtype:8; + u32 rf_band:2; + u32 fr_type_subtype:6; /* 0x48 */ u32 msdu_size:16; -- 2.7.4