From 8a0e6d83070a977442aaba2c5a74cbe34e157012 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Mon, 18 Sep 2017 06:40:39 -0700 Subject: [PATCH] usb: xhci: Don't assume LS/FS devices are always behind a HS hub At present xHCI driver assumes LS/FS devices are attached directly to a HS hub. If they are connected to a LS/FS hub, the driver will fail to perform the USB enumeration process on such devices. This is fixed by looking from the device itself all the way up to the HS hub where the TT that serves the device is located. Signed-off-by: Bin Meng --- drivers/usb/host/xhci-mem.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index d5eab3a..84982a9 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -786,12 +786,22 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, #ifdef CONFIG_DM_USB /* Set up TT fields to support FS/LS devices */ if (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) { - dev = dev_get_parent_priv(udev->dev); - if (dev->speed == USB_SPEED_HIGH) { - hub = dev_get_uclass_priv(udev->dev); + struct udevice *parent = udev->dev; + + dev = udev; + do { + port_num = dev->portnr; + dev = dev_get_parent_priv(parent); + if (usb_hub_is_root_hub(dev->dev)) + break; + parent = dev->dev->parent; + } while (dev->speed != USB_SPEED_HIGH); + + if (!usb_hub_is_root_hub(dev->dev)) { + hub = dev_get_uclass_priv(dev->dev); if (hub->tt.multi) slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); - slot_ctx->tt_info |= cpu_to_le32(TT_PORT(udev->portnr)); + slot_ctx->tt_info |= cpu_to_le32(TT_PORT(port_num)); slot_ctx->tt_info |= cpu_to_le32(TT_SLOT(dev->slot_id)); } } -- 2.7.4