From 89c4695efd4b7d107a9ddbcf5c58b21051939d98 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 18 Jul 2014 13:29:52 -0700 Subject: [PATCH] staging: comedi: ni_mio_common: convert printk messages to dev_err Where possible, convert the printk() messages in this file to dev_err(). Remove a couple commented out printk() messages. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_mio_common.c | 137 ++++++++++++------------- 1 file changed, 64 insertions(+), 73 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 751a1f4..efe62af 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -682,8 +682,8 @@ static inline void ni_set_bitfield(struct comedi_device *dev, int reg, ni_writeb(dev, devpriv->g0_g1_select_reg, G0_G1_Select); break; default: - printk("Warning %s() called with invalid register\n", __func__); - printk("reg is %d\n", reg); + dev_err(dev->class_dev, + "%s called with invalid register %d\n", __func__, reg); break; } mmiowb(); @@ -1082,11 +1082,11 @@ static int ni_ai_drain_dma(struct comedi_device *dev) udelay(5); } if (i == timeout) { - printk("ni_mio_common: wait for dma drain timed out\n"); - printk - ("mite_bytes_in_transit=%i, AI_Status1_Register=0x%x\n", - mite_bytes_in_transit(devpriv->ai_mite_chan), - ni_stc_readw(dev, AI_Status_1_Register)); + dev_err(dev->class_dev, "%s timed out\n", __func__); + dev_err(dev->class_dev, + "mite_bytes_in_transit=%i, AI_Status1_Register=0x%x\n", + mite_bytes_in_transit(devpriv->ai_mite_chan), + ni_stc_readw(dev, AI_Status_1_Register)); retval = -1; } } @@ -1512,9 +1512,9 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, if (ai_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) { - printk - ("unknown mite interrupt, ack! (ai_mite_status=%08x)\n", - ai_mite_status); + dev_err(dev->class_dev, + "unknown mite interrupt (ai_mite_status=%08x)\n", + ai_mite_status); s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; /* disable_irq(dev->irq); */ } @@ -1524,8 +1524,7 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, if (status & (AI_Overrun_St | AI_Overflow_St | AI_SC_TC_Error_St | AI_SC_TC_St | AI_START1_St)) { if (status == 0xffff) { - printk - ("ni_mio_common: a_status=0xffff. Card removed?\n"); + dev_err(dev->class_dev, "Card removed?\n"); /* we probably aren't even running a command now, * so it's a good idea to be careful. */ if (comedi_is_subdevice_running(s)) { @@ -1537,8 +1536,8 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, } if (status & (AI_Overrun_St | AI_Overflow_St | AI_SC_TC_Error_St)) { - printk("ni_mio_common: ai error a_status=%04x\n", - status); + dev_err(dev->class_dev, "ai error a_status=%04x\n", + status); shutdown_ai_command(dev); @@ -1614,9 +1613,9 @@ static void handle_b_interrupt(struct comedi_device *dev, if (ao_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) { - printk - ("unknown mite interrupt, ack! (ao_mite_status=%08x)\n", - ao_mite_status); + dev_err(dev->class_dev, + "unknown mite interrupt (ao_mite_status=%08x)\n", + ao_mite_status); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; } #endif @@ -1624,9 +1623,9 @@ static void handle_b_interrupt(struct comedi_device *dev, if (b_status == 0xffff) return; if (b_status & AO_Overrun_St) { - printk - ("ni_mio_common: AO FIFO underrun status=0x%04x status2=0x%04x\n", - b_status, ni_stc_readw(dev, AO_Status_2_Register)); + dev_err(dev->class_dev, + "AO FIFO underrun status=0x%04x status2=0x%04x\n", + b_status, ni_stc_readw(dev, AO_Status_2_Register)); s->async->events |= COMEDI_CB_OVERFLOW; } @@ -1639,7 +1638,7 @@ static void handle_b_interrupt(struct comedi_device *dev, ret = ni_ao_fifo_half_empty(dev, s); if (!ret) { - printk("ni_mio_common: AO buffer underrun\n"); + dev_err(dev->class_dev, "AO buffer underrun\n"); ni_set_bits(dev, Interrupt_B_Enable_Register, AO_FIFO_Interrupt_Enable | AO_Error_Interrupt_Enable, 0); @@ -1691,7 +1690,6 @@ static int ni_ai_setup_MITE_dma(struct comedi_device *dev) retval = ni_request_ai_mite_channel(dev); if (retval) return retval; -/* printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel); */ /* write alloc the entire buffer */ comedi_buf_write_alloc(s, s->async->prealloc_bufsz); @@ -1888,7 +1886,7 @@ static void ni_prime_channelgain_list(struct comedi_device *dev) } udelay(1); } - printk("ni_mio_common: timeout loading channel/gain list\n"); + dev_err(dev->class_dev, "timeout loading channel/gain list\n"); } static void ni_m_series_load_channelgain_list(struct comedi_device *dev, @@ -2156,8 +2154,8 @@ static int ni_ai_insn_read(struct comedi_device *dev, } } if (i == NI_TIMEOUT) { - printk - ("ni_mio_common: timeout in 611x ni_ai_insn_read\n"); + dev_err(dev->class_dev, "%s timeout\n", + __func__); return -ETIME; } d += signbits; @@ -2180,8 +2178,8 @@ static int ni_ai_insn_read(struct comedi_device *dev, } } if (i == NI_TIMEOUT) { - printk - ("ni_mio_common: timeout in 6143 ni_ai_insn_read\n"); + dev_err(dev->class_dev, "%s timeout\n", + __func__); return -ETIME; } data[n] = (((dl >> 16) & 0xFFFF) + signbits) & 0xFFFF; @@ -2196,8 +2194,8 @@ static int ni_ai_insn_read(struct comedi_device *dev, break; } if (i == NI_TIMEOUT) { - printk - ("ni_mio_common: timeout in ni_ai_insn_read\n"); + dev_err(dev->class_dev, "%s timeout\n", + __func__); return -ETIME; } if (devpriv->is_m_series) { @@ -2857,8 +2855,9 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev, M_Offset_AO_Reference_Attenuation(chan)); break; default: - printk("%s: bug! unhandled ao reference voltage\n", - __func__); + dev_err(dev->class_dev, + "%s: bug! unhandled ao reference voltage\n", + __func__); break; } switch (krange->max + krange->min) { @@ -2869,8 +2868,9 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev, conf |= MSeries_AO_DAC_Offset_5V_Bits; break; default: - printk("%s: bug! unhandled ao offset voltage\n", - __func__); + dev_err(dev->class_dev, + "%s: bug! unhandled ao offset voltage\n", + __func__); break; } if (timed) @@ -3721,14 +3721,12 @@ static void handle_cdio_interrupt(struct comedi_device *dev) cdio_status = ni_readl(dev, M_Offset_CDIO_Status); if (cdio_status & (CDO_Overrun_Bit | CDO_Underflow_Bit)) { - /* printk("cdio error: statux=0x%x\n", cdio_status); */ /* XXX just guessing this is needed and does something useful */ ni_writel(dev, CDO_Error_Interrupt_Confirm_Bit, M_Offset_CDIO_Command); s->async->events |= COMEDI_CB_OVERFLOW; } if (cdio_status & CDO_FIFO_Empty_Bit) { - /* printk("cdio fifo empty\n"); */ ni_writel(dev, CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit, M_Offset_CDIO_Command); /* s->async->events |= COMEDI_CB_EOA; */ @@ -3765,8 +3763,9 @@ static int ni_serial_hw_readwrite8(struct comedi_device *dev, /* Delay one bit per loop */ udelay((devpriv->serial_interval_ns + 999) / 1000); if (--count < 0) { - printk - ("ni_serial_hw_readwrite8: SPI serial I/O didn't finish in time!\n"); + dev_err(dev->class_dev, + "%s: SPI serial I/O didn't finish in time!\n", + __func__); err = -ETIME; goto Error; } @@ -3818,10 +3817,8 @@ static int ni_serial_sw_readwrite8(struct comedi_device *dev, udelay((devpriv->serial_interval_ns + 999) / 2000); /* Input current bit */ - if (ni_stc_readw(dev, DIO_Parallel_Input_Register) & DIO_SDIN) { - /* printk("DIO_P_I_R: 0x%x\n", ni_stc_readw(dev, DIO_Parallel_Input_Register)); */ + if (ni_stc_readw(dev, DIO_Parallel_Input_Register) & DIO_SDIN) input |= mask; - } } if (data_in) @@ -3906,7 +3903,8 @@ static int ni_serial_insn_config(struct comedi_device *dev, err = ni_serial_sw_readwrite8(dev, s, byte_out, &byte_in); } else { - printk("ni_serial_insn_config: serial disabled!\n"); + dev_err(dev->class_dev, "%s: serial disabled!\n", + __func__); return -EINVAL; } if (err < 0) @@ -4416,7 +4414,6 @@ static void ni_write_caldac(struct comedi_device *dev, int addr, int val) int i; int type; - /* printk("ni_write_caldac: chan=%d val=%d\n",addr,val); */ if (devpriv->caldacs[addr] == val) return; devpriv->caldacs[addr] = val; @@ -4428,7 +4425,6 @@ static void ni_write_caldac(struct comedi_device *dev, int addr, int val) if (addr < caldacs[type].n_chans) { bits = caldacs[type].packbits(addr, val, &bitstring); loadbit = SerDacLd(i); - /* printk("caldac: using i=%d addr=%d %x\n",i,addr,bitstring); */ break; } addr -= caldacs[type].n_chans; @@ -4499,7 +4495,8 @@ static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s) unsigned int *maxdata_list; if (n_chans > MAX_N_CALDACS) - printk("BUG! MAX_N_CALDACS too small\n"); + dev_err(dev->class_dev, + "BUG! MAX_N_CALDACS too small\n"); s->maxdata_list = maxdata_list = devpriv->caldac_maxdata_list; chan = 0; for (i = 0; i < n_dacs; i++) { @@ -4594,7 +4591,8 @@ static unsigned ni_old_get_pfi_routing(struct comedi_device *dev, case 9: return NI_PFI_OUTPUT_G_GATE0; default: - printk("%s: bug, unhandled case in switch.\n", __func__); + dev_err(dev->class_dev, + "%s: bug, unhandled case in switch.\n", __func__); break; } return 0; @@ -4745,9 +4743,8 @@ static int cs5529_wait_for_idle(struct comedi_device *dev) if (schedule_timeout(1)) return -EIO; } -/* printk("looped %i times waiting for idle\n", i); */ if (i == timeout) { - printk("%s: %s: timeout\n", __FILE__, __func__); + dev_err(dev->class_dev, "%s timeout\n", __func__); return -ETIME; } return 0; @@ -4768,7 +4765,6 @@ static void cs5529_command(struct comedi_device *dev, unsigned short value) break; udelay(1); } -/* printk("looped %i times writing command to cs5529\n", i); */ if (i == timeout) dev_err(dev->class_dev, "possible problem - never saw adc go busy?\n"); @@ -4789,13 +4785,13 @@ static int cs5529_do_conversion(struct comedi_device *dev, } status = ni_ao_win_inw(dev, CAL_ADC_Status_67xx); if (status & CSS_OSC_DETECT) { - printk - ("ni_mio_common: cs5529 conversion error, status CSS_OSC_DETECT\n"); + dev_err(dev->class_dev, + "cs5529 conversion error, status CSS_OSC_DETECT\n"); return -EIO; } if (status & CSS_OVERRANGE) { - printk - ("ni_mio_common: cs5529 conversion error, overrange (ignoring)\n"); + dev_err(dev->class_dev, + "cs5529 conversion error, overrange (ignoring)\n"); } if (data) { *data = ni_ao_win_inw(dev, CAL_ADC_Data_67xx); @@ -4935,10 +4931,9 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, period_ns = 100; /* these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */ if (period_ns < min_period_ns || period_ns > max_period_ns) { - printk - ("%s: you must specify an input clock frequency between %i and %i nanosec " - "for the phased-lock loop.\n", __func__, - min_period_ns, max_period_ns); + dev_err(dev->class_dev, + "%s: you must specify an input clock frequency between %i and %i nanosec for the phased-lock loop\n", + __func__, min_period_ns, max_period_ns); return -EINVAL; } devpriv->rtsi_trig_direction_reg &= ~Use_RTSI_Clock_Bit; @@ -5001,9 +4996,6 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, MSeries_PLL_Divisor_Bits(freq_divider) | MSeries_PLL_Multiplier_Bits(freq_multiplier); - /* printk("using divider=%i, multiplier=%i for PLL. pll_control_bits = 0x%x\n", - * freq_divider, freq_multiplier, pll_control_bits); */ - /* printk("clock_ns=%d\n", devpriv->clock_ns); */ ni_writew(dev, pll_control_bits, M_Offset_PLL_Control); devpriv->clock_source = source; /* it seems to typically take a few hundred microseconds for PLL to lock */ @@ -5013,9 +5005,9 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, udelay(1); } if (i == timeout) { - printk - ("%s: timed out waiting for PLL to lock to reference clock source %i with period %i ns.\n", - __func__, source, period_ns); + dev_err(dev->class_dev, + "%s: timed out waiting for PLL to lock to reference clock source %i with period %i ns\n", + __func__, source, period_ns); return -ETIMEDOUT; } return 3; @@ -5052,9 +5044,9 @@ static int ni_set_master_clock(struct comedi_device *dev, devpriv->rtsi_trig_direction_reg, RTSI_Trig_Direction_Register); if (period_ns == 0) { - printk - ("%s: we don't handle an unspecified clock period correctly yet, returning error.\n", - __func__); + dev_err(dev->class_dev, + "%s: we don't handle an unspecified clock period correctly yet, returning error\n", + __func__); return -EINVAL; } devpriv->clock_ns = period_ns; @@ -5083,8 +5075,9 @@ static int ni_valid_rtsi_output_source(struct comedi_device *dev, if (source == NI_RTSI_OUTPUT_RTSI_OSC) return 1; - printk("%s: invalid source for channel=%i, channel %i is always the RTSI clock for pre-m-series boards.\n", - __func__, chan, old_RTSI_clock_channel); + dev_err(dev->class_dev, + "%s: invalid source for channel=%i, channel %i is always the RTSI clock for pre-m-series boards\n", + __func__, chan, old_RTSI_clock_channel); return 0; } return 0; @@ -5143,7 +5136,8 @@ static unsigned ni_get_rtsi_routing(struct comedi_device *dev, unsigned chan) } else { if (chan == old_RTSI_clock_channel) return NI_RTSI_OUTPUT_RTSI_OSC; - printk("%s: bug! should never get here?\n", __func__); + dev_err(dev->class_dev, "%s: bug! should never get here?\n", + __func__); return 0; } } @@ -5229,7 +5223,7 @@ static void ni_rtsi_init(struct comedi_device *dev) /* Set clock mode to internal */ devpriv->clock_and_fout2 = MSeries_RTSI_10MHz_Bit; if (ni_set_master_clock(dev, NI_MIO_INTERNAL_CLOCK, 0) < 0) - printk("ni_set_master_clock failed, bug?"); + dev_err(dev->class_dev, "ni_set_master_clock failed, bug?\n"); /* default internal lines routing to RTSI bus lines */ devpriv->rtsi_trig_a_output_reg = RTSI_Trig_Output_Bits(0, @@ -5321,7 +5315,6 @@ static void GPCT_Reset(struct comedi_device *dev, int chan) { int temp_ack_reg = 0; - /* printk("GPCT_Reset..."); */ devpriv->gpct_cur_operation[chan] = GPCT_RESET; switch (chan) { @@ -5370,8 +5363,6 @@ static void GPCT_Reset(struct comedi_device *dev, int chan) ni_stc_writew(dev, devpriv->gpct_input_select[chan], G_Input_Select_Register(chan)); ni_stc_writew(dev, 0, G_Autoincrement_Register(chan)); - - /* printk("exit GPCT_Reset\n"); */ } #endif @@ -5460,7 +5451,7 @@ static int ni_E_init(struct comedi_device *dev, int i; if (board->n_aochan > MAX_N_AO_CHAN) { - printk("bug! n_aochan > MAX_N_AO_CHAN\n"); + dev_err(dev->class_dev, "bug! n_aochan > MAX_N_AO_CHAN\n"); return -EINVAL; } -- 2.7.4